Mehanika loma - FESB

Poslijediplomski studij strojarstvaMehanika lomaLITERATURA[1] Anderson, T.L., Fracture Meshanics: Fundamentals and Applications – Second Edition, CRCPress, 1995.[2] Blake, A., Practical Fracture Mechanics in Design, Marcel Dekker, Inc., 1996.[3] Barsoum, R.S., On the Use of Isoparametric Finite Elements in Linear Fracture Mechanics,Journal Numer. Methods Engrg., 10, pp. 25-37, 1976.[4] Shih, C.F., de Lorenzi, H.G., German, M.D., Crack Extension Modeling with SingularQuadratic Isoparametric Elements, Int. J. Fract, 12, pp. 647-651, 1976.[5] Raju, I.S., Calculation of Strain-Energy Release Rates with Higher Order and Singular FiniteElements, Engineering Fracture Mechanics, 28(3), pp.251-274, 1987.[6] Badari Narayana, K., Dattaguru, B., Certain Aspects Related to Computation by ModifiedCrack Closure Integral (MCCI), Engineering Fracture Mechanics, 55(2), pp. 335-339, 1996.[7] Raju, I.S., Shivakumar, K.N., An Equivalent Domain Integral Method in the Two-Dimensional Analysis of Mixed Mode Crack Problems, Engineering Fracture Mechanics,37(4), pp.707-725, 1990.[8] Rybicki, E.F., Kanninen, M.F., A Finite Element Calculation of Stress Intensity Factors by aModified Crack Closure Integral, Engng Fracture Mech, 9, pp. 931-938, 1977.[9] Hellen, T.K., On the Method of Virtual Crack Extension, Int. J. Numer. Meth. Eng., 9(1),pp. 187-207, 1975.[10] Qian, J., Fatemi, A., Mixed Mode Fatigue Crack Growth, Engineering Fracture Mechanics,55(6), pp. 1277-1284, 1996.[11] Khan, S.M.A., Khraisheh, M.K., Analysis of Mixed Mode Crack Initiation Angles underVarious Loading Conditions, Engineering Fracture Mechanics, 67, pp. 397-419, 2000.[12] Abdel Mageed, A.M., Pandey, R.K., Mixed mode crack growth under static and cyclicloading in A1-alloy sheets, Engineering Fracture Mechanics, 40(2), pp. 371-385, 1991.[13] Erdogan, F., Sih, G.C., On the Crack Extension in Plates under Plane Loading andTransverse Shear, J Basic Eng D, 85, pp. 519-525, 1963.[14] Sih, G.C., Strain Energy Density Factor Applied to Mixed Mode Crack Problems, Int. J.Fract., 10, pp. 305-321, 1974.[15] Hussain, M.A., Pu, S.L., Underwood, J., Strain Energy Release Rate for a Crack underCombined Mode I and Mode II, Fract Anal ASTM STP, 560, pp. 2-28, 1974.41