ACDSeePrint Job - Poljoprivredna tehnika

UDC: 631.354: 633.854.4Turan J.Straw amount with different cutting heights in the area of Sremska MitrovicaCont. Agrg. Engng, 35(2009)1-2, 52-57, 2 tab, 7 fig, 10 ref.With this scientific work the problems of wheat harvest and influence of cutting height tothe amount of straw are covered. Experiment results were gathered in the area of SremskaMitrovica. The experiments were conducted to get the straw amount parameters andproductivity, for the needs of Mitrosrem from Sremska Mitrovica.UDC: 662.756.3:582.916.26:658.52:17.023.38Tomić M, Furman T, Nikolić R, Savin L, Simikić M.Production and usege of biodiesel on the oilseed rape basisCont. Agrg. Engng, 35(2009)1-2, 58-63, 2 fig, 14 ref.Development of mobile systems has been based on using of fissile fuel to a great extent.The alternatives energetic have understood and complete new engine constructions. Theunexpected fast changes in fossile fuel prices imposed needs for fast finding out an alternative.Besides, alternative means substitution fossile fuel without changing in the engineconstruction. Biodiesel is adequate a solution because it is compatible with fossile fuel, basedon restorable raw material and more ecology acceptable than fossile fuel. Oil is one of therichest energetic organic substances, which combustion of 1 g is releasing of 38.7 kJ.Sedlar A, Đukić N, Bugarin R.UDC: 65.012.7:631.347.4:066.07Inspection of sprayers and air-assisted sprayers in aim of Globalgap standardintroductionCont. Agrg. Engng, 35(2009)1-2, 64-72, 1 tab, 9 fig, 10 ref.Increasing of agricultural products consumption through a trans-disciplinary approachleading to high quality produce from environmentally safe sustainable methods is one ofmodern agricultural production aims. European retail Products and good Agricultural Practice(Globalgap) can help us to reach this aim. Very important part of gap are plant protection.Sprayers and air assisted sprayers are mostly use for pesticide application. This paper workshown way of their inspection and calibration according Globalgap standard.153