DIPLOMOVÁ PRÁCA - Žilinská univerzita

g3=fillet(g2,'radii',Rvonk,'point',[1]);
g4=fillet(g3,'radii',Rvonk,'point',[2]);
g5=fillet(g4,'radii',Rvonk,'point',[5]);
g6=fillet(g5,'radii',Rvonk,'point',[7]);
g7=rect2(vnut_x,vnut_y,'base','corner','pos',[poloha_vnut_x,poloha_vnu
t_y]);
g8=fillet(g7,'radii',Rvnut,'point',[1,2,3,4]);
g9=geomcomp({g6,g8},'ns',{'g6','g8'},'sf','g6-g8','edge','none');
%jadro - koniec
clear s
s.objs={g1,g9};
s.name={'E1','CO3'};
s.tags={'g1','g9'};
fem.draw=struct('s',s);
% (Default values are not included)
% (Default values are not included)
% Application mode 1
clear appl
appl.mode.class = 'PerpendicularCurrents';
appl.module = 'CEM';
appl.assignsuffix = '_qa';
clear bnd
bnd.type = 'A';
bnd.ind = [1,1,1,1];
appl.bnd = bnd;
fem.appl{1} = appl;
fem.border = 1;
% Multiphysics
fem=multiphysics(fem);
g2=rect2(vin_trakcia_x,2*vin_trakcia_y+d_p,'base','corner','pos',[polo
ha_vin1_x,poloha_vin_y0]);
%prva cievka pre trakciu
g3=rect2(vin_kurenie_x,2*vin_trakcia_y+d_p,'base','corner','pos',[polo
ha_vin1k_x,poloha_vin_y0+sekcia_y+divertor_y]); %prva cievka pre
kurenie
clear s
s.objs={g1,g9,g2,g3};
s.name={'E1','CO3','R1','R2'};
s.tags={'g1','g9','g2','g3'};
fem.draw=struct('s',s);
clear s
s.objs={g1,g9,g2,g3};
s.name={'E1','CO3','R1','R2'};
s.tags={'g1','g9','g2','g3'};
fem.draw=struct('s',s);
clear s
s.objs={g1,g9,g2,g3};
s.name={'E1','CO3','R1','R2'};
s.tags={'g1','g9','g2','g3'};
fem.draw=struct('s',s);
[g4]=geomcopy({g2});
[g5]=geomcopy({g4});
g5=move(g5,[0,2*(sekcia_y+divertor_y)]);