pravilnik o zvanjima i ovlaÅ¡Äenjima o osposobljenosti pomoraca
pravilnik o zvanjima i ovlaÅ¡Äenjima o osposobljenosti pomoraca
pravilnik o zvanjima i ovlaÅ¡Äenjima o osposobljenosti pomoraca
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
179<br />
SERIAL<br />
NUMBER<br />
DATE<br />
DUTY<br />
OFFICER<br />
CHIEF ENG.<br />
SIGNATURE<br />
1. Prepare generators<br />
for starting<br />
2. Start generators,<br />
increase revolutions<br />
using procedure for<br />
parallel work, put<br />
generators under load<br />
3. Share load in parallel<br />
work<br />
4. Control the system in<br />
automatic work<br />
5. Decrease load to one<br />
generator in parallel<br />
work<br />
6. Stop the generators<br />
Talk with duty engineers about preparing the generators for use. Important figures which you must have on mind are:<br />
Engine propulsion (steam or diesel)<br />
– procedure before start of the engine (such as oil check, fuel check, cooling water (diesel), steam flow (steam),<br />
– starting the engine to nominal number of revolutions<br />
– governor check<br />
Direct current generator<br />
– use of regulator for getting correct voltage<br />
– closing of the main switch<br />
– using of the regulator for the load control<br />
– controlling of the load between generators.<br />
Alternative current generator<br />
– use of regulator for getting correct voltage<br />
– Check the frequency<br />
– synchronizing<br />
– closing of the main switch<br />
– controlling of the load between generators<br />
Get acquainted with work on the main switchboard and ascertain the conditions for work.<br />
7. MAINTENANCE OF DIESEL GENERATORS<br />
TASKS<br />
SHIP'S<br />
SERIAL<br />
NUMBER<br />
DATE<br />
TASK DONE<br />
DUTY<br />
OFFICER<br />
CHIEF ENG.<br />
SIGNATURE<br />
REMARKS<br />
1. Make drawings of<br />
water cooling system<br />
2. Make drawings of<br />
lubrication oil system<br />
3. Make routine control<br />
of the maintenance,<br />
inspect and adjust<br />
clearance where<br />
necessary of:<br />
3.1 Injectors<br />
3.2 Fuel pump