Unior Mjerni Alati

Measuring tools
http://hejkupi.me
www.uniortools.com

Measuring tools
Today’s experienced skilled workers can trust
Unior’s measuring tools more than they can
trust themselves.
Gone are the times when one had to think of
whether the screw is tightened enough or not.
With Unior's measuring tools, the screws are
tightened just as prescribed, their handling
requires less physical force, and work becomes
easier and more effective.
Since there aren't any universal measuring tools
on the market, Unior offers a range of various
implementations which are adjusted to
perform a certain function – from changing of
wheels to mounting of steel constructions in
the building industry.

High quality
High quality
2 years of Guarantee
2 years of Guarantee
Unior’s systems for quality control
are in accordance with ISO 9001
and ISO 14001 standards.
Visoka kakovost
2 leti garancije
Legend of symbols used
in catalogue
code
weight in grams
torque in Nm
torque in lbf.ft
hexagon profile internal 4-point socket
gear rate
m
ft
ø
meters
feet
diameter
Due to constant
protection, each
torque wrench is
being delivered in an
appropriate protection
box – case or in other
solid packaging.
Contact information
UNIOR d.d.
Kovaška cesta 10, 3214 ZREČE, Slovenia
T: +386 3 757 81 00
F: +386 3 576 26 43
I: www.uniortools.com
E: sales@unior.si
Photographs in this catalogue are symbolic.
3

Torque multiplier
For hard-to-handle screws
The torque multiplier can handle the most difficult screws. With the help of a portable
mechanism through a system of gears it increases the effect of the torque force which is
applied when fastening or unfastening a nut or a screw for a few times. Said differently –
during screwing you will need up to five times less energy. The torque multiplier has the
capability to increase the body force for a few times. This can be observed especially on
construction machinery, trucks, heavy mechanization, steel constructions, and everywhere
the screws melted with the surface due to various agents.
280
Torque multiplier
Proper use
The compact and entirely
durable construction is
insensible to atmospheric and
other environmental agents.
Lever support handle
Important!
• We shall never exceed the
requested torque starting point of
the multiplier.
• Recommended use of IMPACT
socket wrenches.
Advantages
• Exactly defined multiplication – no
need of tabular conversions
• Simple use does not require any
additional knowledge
• Exactly definable torque starting
point (possible margin up to +/- 4%)
• Additional handle offers a wide
range of use
• Robust construction requires
minimal maintenance and assures
longer useful life of the product
Use
• Building construction
• Heavy industry
• Shipbuilding
• Aeronautical industry
• Train compositions
• Refineries
• 5:1 torque multiplier, better accuracy
from +/- 4%
• Comes with handle
• Robust construction needs minimum
maintenance and assures longer useful
life of the product
• Comes in protection box, perfect for
truck tool sets
4
During use, the portable mechanism
rotates in the opposite direction
of the socket wrench therefore the
handle needs to be applied.
D A C H
616804 1300 960 5 : 1 1/2" (32 mm) 3/4" 108 126 210 180 5100
616805 2700 2000 5 : 1 3/4" (36 mm) 1" 108 128 210 186 5100

Industrial torque wrenches
Controlled force
The principle of transmitting forces is equal to all other torque wrenches. When the wanted
torque is reached, a special swivel causes the planned fold of the tool's lever. The wanted
torque needs to be always set before adding force.
The portable mechanism ensures controlled adding of force and safe work, also when it
comes to a fold of the lever, because there is no fear of the user loosing his balance due to the
tool’s bumping reactions. This is especially important when work is carried out on bridges,
overhead power lines, and everywhere the loss of balance could have fatal consequences.
265
Industrial torque wrench, 3/4”
Controlled torque
mechanism enables
stable and safe work.
Durable plastic
handle
Exact and
fast setting
of torque
3/4”
Long lever
Important!
• Tool must be used with equal
pulls and in accordance with the
instructions in the manual.
• Torque tightens only in the
direction showed on the key sticker!
• Sticker shows the proper direction
of tightening!
• The default calibration interval of
the torque wrench is 12 months
or 5.000 measurements from the
date of end user purchase.
• ALWAYS set the measuring
mechanism to starting point, at
the end of work.
• Torque wrench can be damaged,
if manual instructions are not
considered.
Advantages
• Robust construction
• Long lever
• a wide turn angle lowers the chance
of overloading
• Accurate results, to +/-4% even in
arduous working conditions
• Cam control of the mechanism gives a
controlled break which will not throw
the operator off balance
• The large break angle improves
accuracy by reducing the possibility
of over torquing
• Dual scaled, Nm and lbf.ft
Use
• Heavy industry
• Building sector
• Shipbuilding
• Agricultural equipment
• Aeronautical industry
Standard: ISO 6789
L
616801 150-700 100-500 3/4" 1090 6300
616802 200-800 150-600 3/4" 1140 6400
616803 300-1000 200-750 3/4" 1470 7300
5

Pre-set torque wrenches
Simple and effective
The pre-set torque wrench is suitable for routine works like changing car tires and everywhere
the same torque value is used.
Each wrench has its own factory preset and exactly defined maximum torque. The suitable
wrenches can easily be found, since they differ in typical colour. When the wanted torque
is achieved, the tool gives a warning sign in form of a “click”.
Available are two basic types of pre-set torque wrenches: torque wrench for cars (value
area of torques from 90 to 130 Nm) and torque wrench for trucks (value area of torques
from 400 to 600 Nm).
Advantages of pre-set torque wrenches
• Robust construction
• One torque value
• Persistence (consists of less parts)
267A
Pre-set torque wrenches for cars 1/2”
Easy to distinguish due to coloured
handles, enabling fast choice of the
right torque wrench.
1/2”
Colour marking of the torque
on the handle
L
618915 90 66.4 black 400 1100
618916 100 73.7 yellow 400 1100
618917 110 81.1 grey 400 1100
618918 120 88.5 red 400 1100
618919 130 95.9 blue 400 1100
Important!
• The torque tightens
only in the direction
shown on the sticker on
the wrench! The sticker
shows the right direction
of tightening!
• The default calibration
interval of the wrench
is 12 months or 5.000
measurements from the
date of purchase.
• Torque wrench can be
damaged, if manual
instructions are not
considered.
Way of marking torque wrenches
6

267B
Pre-set torque wrenches for trucks 3/4”
Easy to distinguish due to colored
handles, enabling fast choice of the
right torque wrench.
3/4”
Colour marking of the torque
on the handle
L
618920 400 295 graphite grey 950 4580
618921 450 332 purple 950 4580
618922 500 369 khaki/sand 950 4580
618923 550 406 light blue 950 4580
618924 600 442 orange 950 4580
Important!
• The torque tightens only in the
direction shown on the sticker on
the wrench! The sticker shows the
right direction of tightening!
• The default calibration interval of
the wrench is 12 months or 5.000
measurements from the date of
purchase.
• Torque wrench can be damaged,
if manual instructions are not
considered.
Way of marking torque wrenches
7

Adjustable torque wrenches
For precise tightening
An extremely useful type of torque wrench since whichever torque value up to 1000 Nm can
be preset. The slipper torque wrench is used for tightening of screws with an exactly prescribed
torque, but is not suitable for the removal of nuts and screws.
Unior's adjustable torque wrenches are available in eleven editions, all of them made light
but compact and extremely accurate. The ribbed handle prevents slipping. Working with
them is therefore safe and pleasant, not to forget the better control and accuracy when
reaching the torque. When the appropriate torque is reached, the tool gives a distinctive
sound (“click”).
Advantages of adjustable
torque wrenches
• Light robust construction
• Wrench operates in clockwise and anticlockwise
directions
• Overload protection
• Warning sound when the wanted
torque is reached
• Accurate calibration
• Dual scaled, Nm and lbf.ft
Important!
• The torque tightens only in the direction shown on
the sticker on the wrench! The sticker shows the
right direction of tightening!
• The default calibration interval of the wrench is 12
months or 5.000 measurements from the date of
purchase.
• ALWAYS set the measuring mechanism to starting
point, at the end of work.
• Torque wrench can be damaged, if manual
instructions are not considered.
263A
Slipper torque wrench 1/2”
• Accuracy: +/- 3%
• Micrometer scale for simple and error free settings
• Adjustment lock to set torque
• Torque apply: both way, but always apply in
direction specified on torque wrench handle
• Handle: Two component material
• Default value for the recalibration interval is 12
month of use, or approximately 5.000 cycles!
1/2”
620110 30-150
620111 50-250
263B
Slipper torque wrench 1/2”
8
• Accuracy: +/- 3%
• Micrometer scale for simple and error free settings
• Adjustment lock to set torque
• Torque apply: one-way, but always apply in direction
specified on torque wrench handle
• Ratchet: works both way, 75 teeth and 5°turn angle
• Handle: Two component material
• Default value for the recalibration interval is 12 month
of use, or approximately 5.000 cycles!
1/2”
620109 8-50

263L
Slipper torque wrench 1/2”
How to properly use
the torque wrench:
1/2”
• Double ended ratcheting spindles
• With overload protection
• Visual signal by pointer, when set torque is reached
• Supplied in durable storage case
• Dual scale lbf.ft and Nm
• Default value for the recalibration interval is 12
month of use, or approximately 5.000 cycles!
Standard: ISO 6789
607948 60-330 45-250 1/2” 675 1440
L
264
Slipper torque wrench
Use of torque wrench 264
1. Unscrew the lower screw to release the handle for torque setup.
• Reversible ratchet head
• For tightening on left and right hand threads
• Unmistakable signal when set torque is reached
• Default value for the recalibration interval is 12
month of use, or approximately 5.000 cycles!
Standard: ISO 6789
2. With the handle, set the wanted torque.
L
3. Tighten the lower screw to set the wanted torque.
615485 1/4” 2-24 20-200 275 750
615486 3/8” 5-110 5-80 306 1000
615487 1/2” 28-210 10-150 450 1670
615488 1/2” 35-350 25-250 635 2330
615489 3/4” 70-560 50-300 850 3780
615490 3/4” 140-700 100-500 1060 9000
615491 1” 140-980 100-700 1120 10000
4. SET and BEGIN to fasten (in the prescribed direction).
When the “click” comes, the wanted torque is achieved –
STOP TIGHTENING!
9

Standard torque wrenches
Without prior preparations
The standard torque wrench is a light and compact tool which differs from other wrenches
in the sense that the wanted torque does not need to be preset. The torque is spread continuously
variable where the measuring mechanism simultaneously marks the momentary
torque value, when a screw or nut is tightened. The torque value can also be read later on
with the help of a measuring indicator with integrated memory, saving the last set torque.
This is the reason why the memory indicator needs to be set to starting position on the
measuring scale after work.
The two-sided bit for the socket enables the tool to be used from the left as well as from the
right side. Therefore the wrench is also suitable for work in tight and difficult-to-reach areas.
Advantages of standard
torque wrenches
• Light and robust tool
• Ergonomic rubber for better grip and easier work
• Torque is spread continuously
• No torque pre-setup needed
• Large and glass-protected measuring scale
• Memory indicator showing the last set torque
Important!
• The torque tightens only in the direction
shown on the sticker on the wrench! The
sticker shows the right direction of tightening!
• The default calibration interval of the wrench
is 12 months or 5.000 measurements from the
date of purchase.
• ALWAYS set the measuring mechanism to
starting point, at the end of work.
• Torque wrench can be damaged, if manual
instructions are not considered.
260
Dial torque wrench 1/4”
An additional memory indicator which
saves the last set torque.
Extremely light and persistent
construction of the torque wrench
Art. 260 = 0.52 kg
Art. 261 = 0.52 kg
Art. 262 = 1.5 kg
Compact and robust construction,
insensible to weather and other
environmental conditions.
Anatomic handle enabling the torques to
be carried out without effort.
1/4”
Protected scale of
the torque wrench
Regulation of the
memory indicator
Unique ID number
of the torque
• Fitted with double ended
ratcheting spindles
• Overload protection
• Visual signal by pointer, when set
torque is reached
• Supplied in durable storage case
a
Standard: ISO 6789
L
10
607138 2.4-12 4-120 61 244 1/4" 520

Simple use:
The torque can be
applied from both
sides of the wrench.
261
Dial torque wrench 3/8”
3/8”
Standard: ISO 6789
• Fitted with double ended
ratcheting spindles
• Overload protection
• Visual signal by pointer, when set
torque is reached
• Supplied in durable storage case
a
L
607139 8-40 20-360 69 244 3/8" 520
262
Dial torque wrench 1/2”
1/2”
Standard: ISO 6789
• Fitted with double ended
ratcheting spindles
• Overload protection
• Visual signal by pointer, when set
torque is reached
• Supplied in durable storage case
a
L
607140 16-80 50-600 86 435 1/2" 1500
11

Measuring instruments
Vernier
271 270A
Digital vernier
• Resolution: 0.01 mm/0.0005”
• Function: measurement of
internal dimensions, of external
dimensions, of depth, of steps
• Resolution: 0.01 mm/0.0005”
• Measuring speed: 1.5 m/sec
• Function: measurement of
internal dimensions, of external
dimensions, of depth, of steps
D B L
612035 0 - 150 40 235 135
D B L
619881 0 - 150 40 235 170
272
External micrometer
• Made of quality casting.
Measuring surface made of
hardened alloy
• Spindle: 6.5 mm dia., with
locking lever and ratchet
• According to DIN 863
• Measuring range: 0-25 mm,
minimal reading: 0.01 mm
617698 202
12

Measuring tapes
710P
Measuring tape
710W
Folding Rule
• Plastic double component casing
• With stop and clip
m ft D
612131 2 16 101
612132 3 16 123
612133 5 19 212
612134 8 25 447
612135 10 25 499
612784 2 6 16 101
612785 3 10 16 123
612786 5 16 19 212
612787 8 26 25 447
612788 10 33 25 499
• Beech wooden folding rules
• mm - graduation printed in both sides
• Preciseness to class III
m
609365 2 16 110
D
710R
Measuring tape
• Plastic double component casing
• With stop and clip
m ft D
612789 2 16 100
612790 3 16 120
612791 5 19 170
612792 8 25 400
612793 2 6 16 100
612794 3 10 16 120
612795 5 16 19 170
612796 8 26 25 400
13

Level
Alu-spirit level
1250 1255
Spirit level professional
610716 300 220
610717 400 270
610718 500 340
610719 600 380
610720 800 510
610721 1000 600
610722 1200 680
610723 1500 900
610724 2000 1200
1252
L
• Quality aluminium profile,
dimension 48 x 22 mm
• Silver eloxated surface
• Fitted with shock-proof plexi vials
• Accurate to 0.5 mm/m
• Accuracy electronically tested
Alu-spirit level with magnet
• With one horizontal and two vertical plexiglass vial
• Measuring accuracy of 0.5 mm/m in normal position
• Measuring accuracy of 0.75 mm/m in inverted position
• Walls are thicker, strengthened with ribs outside and walls inside,
hereby increasing their rigidity and resistance to deformation
• Horizontal vial with fluorescent background allows measuring also
in places lacking the light
618874 300 350
618875 400 440
618876 500 540
618877 600 630
618878 800 820
618879 1000 1000
618880 1200 1190
618881 1500 1470
618882 1800 1750
618883 2000 1930
618884 2500 2390
L
1255H
Spirit level professional,
with handles
610725 400 270
610726 500 340
610727 600 380
610728 800 510
610729 1000 600
1253
L
• Quality aluminium profile,
dimension 48 x 22 mm
• Silver eloxated surface
• Fitted with shock-proof
plexi vials
• Accurate to 0.5 mm/m
• Accuracy electronically tested
• The measuring surface is
equipped with two magnets
Torpedo spirit level
• With one horizontal and two vertical plexiglass vial
• Two integrated ergonomically shaped handles
• Measuring accuracy of 0.5 mm/m in normal position
• Measuring accuracy of 0.75 mm/m in inverted position
• Walls are thicker, strengthened with ribs outside and walls inside,
hereby increasing their rigidity and resistance to deformation
• Horizontal vial with fluorescent background allows measuring also
in places lacking of light
L
617699 300 336
617700 400 435
617701 500 534
617702 600 640
14
• Casing made of high
aluminium alloy Al Si12
• With 2 vials
• With milled measuring surface
• Accuracy: 0.5 mm/m
L
618885 600 680
618886 800 870
618887 1000 1060
618888 1200 1260
618889 1500 1540
618890 1800 1830
618891 2000 2020
618892 2500 2480

Squares
Try squares
1260/7 1262/5
Mason’s square
• Material: constructional steel
• Measuring faces are finely ground
• Accuracy: 0.01425° = 0.25 mm/m
L1 L2 A
610730 125 85 5 180
610731 150 100 5 210
610732 200 130 5 390
610733 250 165 5 490
610734 300 200 5 560
1260/7A
Try square with back
• Material: constructional steel
• Surface finish: zinc plated
• Accuracy: +/- 0.0285° = 0.5 mm/m
L1 L2 A
610740 125 85 5 180
610741 150 100 5 210
610742 200 130 5 390
610743 250 160 5 490
610744 300 175 5 560
1262/5A
Mason’s square with back
• Material: constructional steel
• Measuring faces are finely ground
• Accuracy: 0.01425° = 0.25 mm/m
• Back is screwed on the short leg
L1 L2 A
610735 125 85 5 180
610736 150 100 5 210
610737 200 130 5 390
610738 250 165 5 490
610739 300 200 5 560
• Material: constructional steel
• Surface finish: zinc plated
• Accuracy: + /- 0.0285° = 0.5 mm/m
• Back is screwed on the short leg
L1 L2 A
617154 125 85 5 250
617155 150 100 5 300
617156 200 130 5 390
617157 250 160 5 570
617158 300 175 5 650
1263
Try square
• Measuring blade made from hardened spring steel, 40 × 1.2 mm,
with mm – graduation
• The support blade made of black anodized aluminium profile ,
L-form 40 x 14 mm
• Accuracy: 0.5 mm/m
L1
L2
617693 250 135 180
617694 300 135 200
617695 350 190 270
617696 400 190 290
617697 500 210 330
15

Mason’s profiles
Feeler gauges
Mason’s staff
1270 701
Feeler gauge
• Conformity certificate
• Stainless steels
• Made of quality aluminium profile
• At the end the profile is protected with plastic inserts
• With two integrated vials
• Used for measuring and flattening of bigger vertical and
horizontal surfaces in construction
601896 0.05-0.5 8
601897 0.05-1 13
601898 0.05-1 20
701 A
Screw pitch gauges
L B A
610745 2000 100 18 1800
610746 2500 100 18 2300
610747 3000 100 18 2700
610748 4000 100 18 3600
1272
Mason’s profile
• Conformity certificate
• Stainless steel
• For outside and inside measurements
• Metric - thread: 0.4-7 (28 gauges)
• Whitworth - thread: 4-62 (20 gauges)
616706 48
• Made of quality aluminium profile
• With two integrated handles and two vials
• Used for working front, pavement, roughcast, first of all for
easier and accurate work in construction
L B A
610751 1000 100 18 900
610752 1500 100 18 1350
610753 2000 100 18 1800
610754 2500 100 18 2300
610755 3000 100 18 2700
610756 4000 100 18 3600
16

Other measuring instruments
Scriber
1279 1290/5
Rumb
• Made from quality steel
• Equipped with pocket clip
• With a point that assures long life of drawing
on different hard grounds
• Made from quality steel
• With 4 meter long string
L
617692 150 37
617725 170
Flat rule
1280 1299
Carpenter’s pencil
• Made of silver anodized aluminium profile
cross section 60 x 5 mm, with facet
• With one side mm-graduation
• Made from quality wood
• Graphite hardness HB
L
617703 400 256
617704 500 319
617705 600 383
617706 800 508
617707 1000 630
617724 180 7
L
17

Conversion factors
Conversion of torque units
measure unit
measure unit
= Ncm = Nm = kpcm = kpm = lbf.in. = lbf.ft
Ncm 1 0.01 0.10197 0.00102 0.0885 0.00738
Nm 100 1 10.197 0.10197 8.851 0.7376
kpcm 9.807 0.09807 1 0.01 0.868 0.0723
kpm 980.07 9.807 100 1 86.796 7.233
lbf.in. 11.298 0.11298 1.152 0.01152 1 0.0833
lbf.ft. 135.58 1.3558 13.825 0.13825 12 1
measure unit
Conversion of power units
measure unit
= N = kN = kg = g = mg = lb
N 1 0.01 0.102 102 102000 0.2248
kN 1000 1 102 102000 102000000 224.8
kg 9.807 0.009807 1 1000 1000000 2.205
g 0.009807 0.000009807 0.001 1 1000 0.002205
mg 0.000009807 9.807e-9 0.000001 0.001 1 0.000002205
lb 4.448 0.004448 0.4536 453.6 453600 1
measure unit
Conversion of geometric units
measure unit
= inch = yard = foot = km = m = mm = micron = nm
inch 1 0.02778 0.08333 0.0000254 0.0254 25.4 25400 25400000
yard 36 1 3 0.0009144 0.9144 914.4 914400 914400000
foot 12 0.3333 1 0.0003048 0.3048 304.8 304800 304800000
km 39370 1094 3281 1 1000 1000000 1000000000 1000000000000
m 39.37 1.094 3.281 0.001 1 1000 1000000 1000000000
mm 0.03937 0.001094 0.003281 0.000001 0.001 1 1000 1000000
micron 0.00003937 0.000001094 0.000003281 1e-9 0.000001 0.001 1 1000
nm 3.937e-8 1.094e-9 0.000 1e-12 1e-9 0.000001 0.001 1
measure unit
Conversion of energy units
measure unit
= kJ = kcal = cal = kWh = Wh = Ws = BTU
kJ 1 0.2388 238.8 0.0002778 0.2778 1000 0.9478
kcal 4.187 1 1000 0.001163 1.163 4187 3.968
cal 0.004187 0.001 1 0.000001163 0.001163 4.187 0.003968
kWh 3600 859.8 859800 1 1000 3600000 3412
Wh 3.6 0.8598 859.8 0.001 1 3600 3.412
Ws 0.001 0.0002388 0.2388 2.778e-7 0.0002778 1 0.0009478
BTU 1.055 0.252 252 0.0002931 0.2931 1055 1
18

measure unit
Conversion of pressure units
measure unit
= bar = kPa = hPa = milibar = Pa = kgf/m 2 = psi
bar 1 100 1000 1000 100000 10200 14.5
kPa 0.01 1 10 10 1000 102 0.145
hPa 0.001 0.1 1 1 100 10.2 0.0145
milibar 0.001 0.1 1 1 100 10.2 0.0145
Pa 0.00001 0.001 0.01 0.01 1 0.102 0.000145
kgf/m 2 0.00009807 0.009807 0.09807 0.09807 9.807 1 0.001422
psi 0.06895 6.895 68.95 68.95 6895 703.1 1
measure unit
Conversion of speed units
measure unit
= km/s = m/s = mph = sea mile per hour
km/s 1 1000 2237 1944
m/s 0.001 1 2.237 1.944
mph 0.000447 0.447 1 0.869
sea mile per hour 0.0005144 0.5144 1.151 1
Conversion of angle units
measure unit
measure unit
= deg = rad = grad
deg 1 0.01745 1.111
rad 57.3 1 63.66
grad 0.9 0.01571 1
measure unit
Conversion of flow rates
measure unit
l/min m 3 /min cm 3 /min
l/min 1 0.001 1000
m 3 /min 1000 1 1000000
cm 3 /min 0.001 0.000001 1
19

621517
Hejkupi.me online trgovina
Barbus Toys d.o.o.
72250 Vitez - BiH
info@hejkupi.me
http://hejkupi.me