program poslijediplomskog doktorskog studija - Tehnički fakultet u ...

Program poslijediplomskog doktorskog studija
OBJAVLJENI I KVALIFICIRAJUĆI RADOVI OD 2000. GODINE
1. Franulović, M.; Križan, B.: «Stress Concentration on Double-Keyed Shafts Loaded by Torque», 3.
međunarodni skup «RIM 2001», Bihać, Bosna i Hercegovina, 2001. 2. Lovrin, N.; Križan, B.:
«Analysis of the Tooth Root Stress in High Transverse Contact Ratio Involute Gearing», Proc. of «7th
Int. Design Conference "Design 2002", Dubrovnik, 2002. 3. Križan, B.; Lovrin, N.: «Analysis of the
Hertzian Stress in High Transverse Contact Ratio Involute Gearing», Proc. of “The 10th Int.
Conference on Machine Design and Production - UMTIK 2002», Cappadocia, Turska, 2002. 4. Lovrin,
N.; Križan, B.: “Determination of Optimal Tooth Height in High Transverse Contact Ratio Involute
Gearing”, Proc. of 6th Int. Research/Expert Conference “Trends in the Development of Machinery and
Associated Technology TMT 2002”, Neum, Bosnia and Herzegovina, 2002. 5. Križan, B.; Basan, R.;
Lovrin, N.: “A Contribution to the Optimal Choice of the HCR-gears Regarding Frictional Losses”, Int.
Journal of Applied Mechanics and Engineering, Vol. 7, 2002. 6. Križan, B.; Lovrin, N.; Franulović, M.:
“Load Capacity of the Tooth Root in Internal High Transverse Contact Ratio Involute Gearing”, Proc. of
17th Int. Conference on Production Research, Blacksburg, Virginia, SAD, 2003. 7. Franulović, M.;
Križan, B.; Lovrin, N.: «The Influence of Quality Grade and Loading on Load Distribution on Gears»,
Proc. of «microCAD 2004», Int. Scientific Conference, Miskolc, 2004. 8. Franulović, M.; Križan, B.;
Lovrin, N.: «Influence of Pitch Errors on Load Distribution on Spur Involute HCR Gears Teeth», Proc.
of «8th Int. Design Conference "Design 2004", Dubrovnik, 2004. 9. Lovrin, N.; Križan, B.; Franulović,
M.: «Photoelastic Research of the Hertzian Stress in HCR_Gears», Proc. of «8th Int. Design
Conference "Design 2004", Dubrovnik, 2004. 10. Basan, R.; Križan, B.; Franulović, M.: «The
Influence of the Gears Geometry on Value of the Force Acting on Tooth of HCR Gears», Proc. of 3rd
DAAAM Int. Conference on Advanced Technologies for Developing Countries ATDC '04, Split, 2004.
11. Franulović, M.; Križan, B.; Lovrin, N.: «The Influence of Quality Grade and Loading on Load
Distribution on HCR Gears», Proc. of “11th Int. Conference on Machine Design and Production -
UMTIK 2004», Antalya, Turska, 2004. 12. Lovrin, N.; Basan, R.; Križan, B.: “A Contribution to the
Analytical Determination of Tooth Root Stresses in High Transverse Contact Ratio Gears”, Proc. of
“11th Int. Conference on Machine Design and Production - UMTIK 2004», Antalya, Turska, 2004.
Znanstveno-nastavno ili nastavno zvanje i datum zadnjeg izbora
Redoviti profesor (trajno zvanje) od ožujka 2005.
199