program poslijediplomskog doktorskog studija - Tehnički fakultet u ...

Program poslijediplomskog doktorskog studija
7. DOVČ, Marjan, MOŽINA, Janez, KOSEL, Franc. Optodynamic deformation of a metal plate illuminated by
a Gaussian laser pulse. J. therm. stress., 2001, vol. 24, no. 11, str. 1043-1062.
8. KUSELJ, Boris, KOSEL, Franc. The growth of debonded area in a bonded two-layer plate-strip. Z.
angew. Math. Mech., 2001, vol. 81, suppl. 2, str. S313-S314.
9. PIPAN, Janez, KOSEL, Franc. Numerical simulation of rotational symmetric tube bulging with inside
pressure and axial compression. Int. j. mech. sci.. [Print ed.], 2002, vol. 44, no. 3, str. 645-664.
10. BREMEC, Boštjan, KOSEL, Franc. Določanje kritične obremenitve krožnih kolobarjev v elastoplastičnem
območju = Determination of the buckling loads of circular annular plates in the elastic-plastic
region. Stroj. vestn., 2002, letn. 48, št. 11, str. 613-620.
11. KOSEL, Tadej, GRABEC, Igor, KOSEL, Franc. Time-delay estimation of acoustic emission signals using
ICA. Ultrasonics. [Print ed.], 2002, vol. 40, no. 1/8, str. 303-306.
12. KOSEL, Tadej, GRABEC, Igor, KOSEL, Franc. Intelligent location of simultaneously active acoustic
emission sources: Part 1. Aircr. Eng., 2003, vol. 75, št. 1, str. 11-17.
13. KOSEL, Tadej, GRABEC, Igor, KOSEL, Franc. Intelligent location of two simultaneously active acoustic
emission sources: Part II. Aircr. Eng., 2003, letn. 75, št. 2, str. 137-142.
14. ŠAJN, Viktor, KOSEL, Franc, ŠTOK, Boris. Numerical simulation of wind flow around an elastic inflated
membrane. Int. j. eng. model., 2003, let. 16, št. 3/4, str. 83-88.
15. DRAŽUMERIČ, Radovan, KOSEL, Franc. Geometrijska optimizacija pri uklonu palice = Optimizing the
geometry for the buckling of a bar. Stroj. vestn., 2003, letn. 49, št. 7/8, str. 385-397.
16. MESARIČ, Mihael, KOSEL, Franc. Unsteady airload of an airfoil with variable camber. Aerosp. sci.
technol.. [Print ed.], 2004, letn. 8, št. 3, str. 167-174.
17. KOSEL, Tadej, GRABEC, Igor, KOSEL, Franc. Intelligent location of two simultaneously active acoustic
emission sources. Aerosp. sci. technol.. [Print ed.], 2005, letn. 9, št. 1, str. 45-53.
18. VIDENIČ, Tomaž, KOSEL, Franc. A shrink-fit problem between an eccentric and a solid of hollow shaft
annulus. J.strain anal. eng. des., 2004, letn. 39, št. 6, str. 653-661.
19. KOSEL, Franc, BREMEC, Boštjan. Elastoplastic buckling of circular annular plates under uniform inplane
loading. Thin-walled struct.. [Print ed.], 2004, letn. 42, št. 1, str. 101-117.
20. BATISTA, Milan, KOSEL, Franc. Cantilever beam equilibrium configurations : article in press. Int. j.
solids struct.. [Print ed.], 16. march 2005 (on line).
21. DRAŽUMERIČ, Radovan, KOSEL, Franc. Optimization of geometry for lateral buckling process of a
cantilever beam in the elastic region. Thin-walled struct.. [Print ed.], 2005, letn. 43, št. 3, str. 515-529.
Znanstveno-nastavno ili nastavno zvanje i datum zadnjeg izbora
Redoviti profesor. 1992.
197