program poslijediplomskog doktorskog studija - Tehnički fakultet u ...

Program poslijediplomskog doktorskog studija
7. Kuljanić, E. & Cukor, G.: Machinability Testing and Optimization of Machining Processes, In: CIM2001 /
7 th Int. Scientific Conf. on Prod. Eng., Cebalo, R. & Schulz, H. (Ed.), pp. I-095-104, ISBN 953-97181-3-9,
Lumbarda, Korčula, Croatia, 14.-15.06.2001. 8. Cukor, G.: A New Statistical Concept of Tool Life
Modeling, In: CIM2002 / 8 th Int. Scientific Conf. on Prod. Eng., Cebalo, R. & Schulz, H. (Ed.), pp. I-037-
045, ISBN 953-97181-4-7, Brijuni, Croatia, 13.-14.06.2002. 9. Cukor, G. & Kuljanić, E.: Tool Flank Wear
Prediction Using the Force-Time Measurements in Turning, In: AMST'02 - Advanced Manufacturing
Systems and Technology, CISM Courses and Lectures No. 437, Kuljanić, E. (Ed.), pp. 143-150, ISBN 3-
211-83689-6, Springer-Verlag Wien New York. 10. Cukor, G.: Cutting Forces and Adhesive Flank Wear
Model, Proc. of the 1st DAAAM Int. Conf. on "Advanced Technologies for Developing Countries" ATDC'02,
Katalinic, B. & Kljajin, M. (Ed.), pp. 161-166, ISBN 3-901509-32-1, Slavonski Brod, Croatia, September
12-14, 2002. 11. Cukor, G.: Practical Model for On-Line Prediction of the Tool's Flank Wear, Proc. of the
6 th Int. Research/Expert Conf. TMT 2002, Brdarević, S. et al. (Ed.), pp. 87-90, ISBN 9958-617-11-0,
Neum, B&H, 18-22 September, 2002. 12. Cukor, G. & Stoić, A.: A Probabilistic Surface Roughness Model
in Laser Cutting Optimisation, Annals of DAAAM for 2002 & Proc. of the 13th Int. DAAAM Symposium,
Katalinic, B. (Ed.), pp. 115-116, ISBN 3-901509-29-1, Vienna, Austria, October 23-26th, 2002. 13. Stoić,
A. & Cukor, G.: Optimisation Strategy for Laser Beam Cutting, Annals of DAAAM for 2002 & Proc. of the
13th Int. DAAAM Symposium, Katalinic, B. (Ed.), pp. 537-538, ISBN 3-901509-29-1, Vienna, Austria,
October 23-26th, 2002. 14. Cukor, G. & Kuljanić, E.: A Genetic Programming Approach for Developing the
Machinability Models, In: CIM 2003 / 9 th Int. Scientific Conf. on Prod. Eng., Cebalo, R. & Schulz, H. (Ed.),
pp. I-031-038, ISBN 953-97181-5-5, Lumbarda, Croatia, 05.-06.06.2003. 15. Kuljanić, E., Sortino, M. &
Cukor, G.: Statistical Analysis of the Rotating Dynamometer Signals in Face Milling, In: CIM 2003 / 9 th Int.
Scientific Conf. on Prod. Eng., Cebalo, R. & Schulz, H. (Ed.), pp. I-083-094, ISBN 953-97181-5-5,
Lumbarda, Croatia, 05.-06.06.2003. 16. Stoić, A., Kopač, J. & Cukor, G.: Tool Condition Monitoring and
Control, In: CIM 2003 / 9 th Int. Scientific Conf. on Prod. Eng., Cebalo, R. & Schulz, H. (Ed.), pp. I-121-
131, ISBN 953-97181-5-5, Lumbarda, Croatia, 05.-06.06.2003. 17. Barišić, B. & Cukor, G.: Estimate of
Consumed Energy at Backward Extrusion Process by Means of Modeling Approach, Proc. of the Int. Conf.
on Advances in Materials and Processing Technologies (AMPT 2003), Olabi, A.G. & Hashmi, M.S.J. (Ed.),
Vol. II, pp. 1166-1169, ISBN 1-872327-397, Dublin, Republic of Ireland, 8 – 11 July 2003. 18. Stoić, A. &
Cukor, G.: Optimisation Method for Laser Beam Cutting, Chapter 49, DAAAM International Scientific Book
2003, Katalinic, B. (Ed.), pp. 569-582, ISBN 3-901509-36-4, ISSN 1726-9687. 19. Cukor, G. & Stoić, A.:
Solving the Face Milling Optimisation Problem by Evolutionary Algorithm, Proc. of the 7 th Int.
Research/Expert Conf. TMT 2003, Vivancos, J. et al. (Ed.), pp. 29-32, ISBN 9958-617-18-8, Lloret de Mar,
Barcelona, Spain, 15-17 September, 2003. 20. Barišić, B. & Cukor, G.: Numerical-Experimental Modeling
of Consumed Energy at Deep Drawing Process, Proc. of the 4 th Int. Scientific Conf. on Production
Engineering "Development and Modernization of Production" RIM 2003, Karabegović, I. et al. (Ed.), pp.
191-194, ISBN 9958-624-16-8, Bihać, Bosnia and Herzegovina, September 25 th -27 th , 2003. 21. Barišić,
B., Cukor, G. & Sladić, S.: Stochastic Simulation of Different Production Processes with the Same Product
Goal, Proc.of the 7 th Int. Scientific Conf. "New Ways in Manufacturing Technologies 2004", Monka, P.
(Ed.), pp. 353-356, ISBN 80-8073-136-5, Prešov, Slovak Republic, 17.-18. June, 2004. 22. Barišić, B.;
Cukor, G. & Pletenac, L.: Modeling and Simulation of Deep Drawing Tool Geometry, Annals of DAAAM for
2004 & Proc. of the 15th Int. DAAAM Symposium, Katalinic, B. (Ed.), pp. 029-030, ISSN 1726-9679, ISBN
3-901509-42-9, Vienna, Austria, November 3-6th, 2004. 23. Barišić, B.; Cukor, G. & Math, M.: Estimate
of consumed energy at backward extrusion process by means of modelling approach, Journal of Materials
Processing Technology, Vol. 153-154, (10 November), Hashmi, M. S. J. (Ed.), pp. 907-912, ISSN 0924-
0136, Elsevier B. V.
Znanstveno-nastavno ili nastavno zvanje i datum zadnjeg izbora
Izvanredni profesor, 30.05.2003.
162