ABB AV2123000 Positioner User Manual

INTRODUCTION
The section arrangement of this instruction is sequential. After initial
start-up and calibration, store this instruction in a safe place for
future reference.
REFERENCE DOCUMENTS
Table 1-1. Reference Documents
Number
ANSI/NFPA 70
CEC
D-AAP-UP
D-APE-AV1234
CSA c22.1
I-E96-500
I-P81-20
ANSI/ISA-7.0.01-1996
ISA S75.13-1989
P-P88-001
Title
National Electrical Code
Canadian Electrical Code
Universal Pneumatic Rotary Actuator, Type UP (specification)
Characterizable Positioners, Type AV1, AV2, AV3 & AV4 (specification)
Process Control Equipment
Site Planning and Preparation
Universal Pneumatic Rotary Actuator, Type UP (instruction)
Quality Standards for Instrument Air
Method of Evaluating the Performance of Positioners with Analog Input Signals and
Pneumatic Output (Instrument Society of America)
Product Application Guide, Installing a Type AV Positioner in a Hazardous Location
NOMENCLATURE
Table 1-2. Nomenclature
Position 1 2 3 4 5 6 7 8 9
Type A V _ _ _ _ _ _ _ Characterizable Positioners
1
Next Page Characterizable Pneumatic Positioner
2
Characterizable 4 to 20-mA Input Positioner (actuator moves to 0%
or 100% upon loss of signal)
Input Signal
1 20.7 to 103.4 kPa (3.0 to 15.0 psig) (Type AV1)
2 20.7 to 186.2 kPa (3.0 to 27.0 psig) (Type AV1)
3 4 to 20 mA (standard intrinsically safe Type AV2)
5 20.7 to 103.4 kPa (3.0 to 15.0 psig), high temperature applications
(Type AV1) 1
6 20.7 to 186.2 kPa (3.0 to 27.0 psig), high temperature applications
(Type AV1) 1
7 4 to 20 mA with explosionproof I/P converter (NEMA 7) (Type AV2) 2
Stroke/Rotary Motion (cam selection)
1 12.7 to 50.8 mm (0.5 to 2.0 in.) or 45° rotary motion
2 25.4 to 101.6 mm (1.0 to 4.0 in.) or 90° rotary motion
REFERENCE DOCUMENTS
1 - 6