Mobil luftkonditionering Mobile Air Conditioner Liikuteltava ...

AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel and remote control and all its
functions, then follow the symbol for the functions you desire.
The unit can be controlled by the unit control panel alone or with the remote control.
NOTE: This manual does not include Remote Control Operations, see the 'Remote Control Instruction' packed
with the unit for details.
OPERATION PANEL OF THE AIR CONDITIONER
Fig. 4
30
1. MODE select button
Selects the appropriate operating mode. Each
time you press the button, a mode is selected in
a sequence that goes from AUTO, COOL, DRY
and FAN. The mode indicator light illuminates
under the different mode settings. Fig. 4.
2. TIMER button
Used to initiate the AUTO ON start time and
AUTO OFF stop time program, in conjunction
with the and buttons.
3. POWER button
Power switch on/off.
4. SLEEP button
Used to initiate the SLEEP operation.
5. FAN button
Controls the fan speed. Press to select the fan
speed in four steps: LOW, MED, HI and AUTO.
The fan speed indicator light illuminates under
different fan settings except under AUTO speed.
When AUTO fan speed is selected, all the fan
indicator lights turn dark.
6. UP and DOWN buttons
Used to adjust the temperature settings in 1°C
(2°F) increments, in a range of 17°C (62°F) to
30°C (88°F) or the TIMER setting in a range of
0-24 hrs.
Remote signal receptor
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same
time, for 3 seconds.
7. LED Display
Shows the set temperature in "°C" or "°F" and
Auto-timer settings. While on DRY and FAN
modes, it shows the room temperature.
Error codes
E1- Room temperature sensor error
Unplug the unit and plug it back in.
If error repeats, call for service.
E2- Evaporator temperature sensor error
Unplug the unit and plug it back in.
If error repeats, call for service.
E3- Display panel communication error
Unplug the unit and plug it back in.
If error repeats, call for service.
P1- Bottom tray is full
Connect the drain hose and drain the
collected water away. If error repeats, call for
service.
8. SWING button
When the operation is ON, press the SWING
button to stop the louver at the desired angle.
The moving angle of the louver is 6° for each
press. Keep pressing the button without releasing
for more than 2 seconds, will activate the
auto swing feature.