Mentenanta Conductelor de Transport Gaze Naturale - Transgaz

17. Benmoussat A. Hadjel M., Rehabilitation de tubes GZ1 40‖ par evaluation de
la resistance residuelle, Symposium International: Qualite et Maintenance au
Service de l’Entreprise, QUALIMA01 – Tlemcen, 2004
18. Bercha G.F., Special problems in pipeline risk assessment, 2000 International
Pipeline Conference – ASME 2000 / Canada, vol.1, p.501-505
19. Brooker D. C., Denting of pressurised pipelines under localised radial
loading, International Journal of Mechanical Sciences 46 (2004) 1783–1805
20. Brooker D. C., Experimental puncture loads for external interference of
pipelines by excavator equipment, International Journal of Pressure Vessels
and Piping 82 (2005) 825–832
21. Brooker D. C., Numerical modeling of pipeline punctures under excavator
loading. Part I. Development and validation of a finite element material
failure model for puncture simulation, International Journal of Pressure
Vessels and Piping 80 (2003) 715–735
22. Brooker D. C., Numerical modelings of pipeline puncture under excavator
loading. Part II: parametric study, International Journal of Pressure Vessels
and Piping 80 (2003) 727–735
23. Brongers P.H.M., ş.a., Influence of line-pipe steel metallurgy on ductile
tearing of stress-corrosion cracks durring simulated hydrostatic testing, 2000
International Pipeline Conference – ASME 2000 / Canada, vol.2, p.743 -756
24. Buchheim, G.M., ş.a., Update for Fitness-For-Service and Inspection for the
Petrochemical Industry, ASME PVP-Vol. 288, American Society of
Mechanical Engineers, New York, 1994, p. 253-260
25. Burgherr P., Hirschberg S., Comparative assessment of natural gas accident
risks, Paul Scherrer Institut – PSI, january 2005
26. Caldeira Duarte J. A., Optimization of the preventive maintenance plan of a
series components system, International Journal of Pressure Vessels and
Piping, 83 (2006), p. 244–248
27. Cerjak H., Essais inter-laboratoires relatifs à la ―microstructure en ZAT‖,
Soudage et Techniques connexes, Mars-Avril, 2001, p.19-23
28. Chicota D., Araujob P., Hornyc N., Tricoteauxc A., Lesage T, J., Application
of the interfacial indentation test for adhesion toughness determination,
Surface & Coatings Technology 200 (2005) 174– 177
29. Chin L-J, A model for toughness studies of welds, Welding Research
Supplement, July, 1969, p.290-294
30. Chiovelli, S.C., Dorling, D.V., Glover, A.G., Horsley, D.J., - Main line
failure resulted from combination of minor causes, Oil & Gas Journal, Mar.,
21, 1994, p. 91-100.
31. Ciolac S. ş.a., Coroziunea în pitting a metalelor, Studii şi cercetări de Chimie.
nr. 5 – 1973, p. 597 – 610 şi nr. 6 – 1973, p. 669 – 684
32. Constantinescu Al., ş.a., Protecţia anticorosivă în industria de petrol şi gaze,
Editura Tehnică, Bucureşti, 1973
33. Corder I, Chatain P., EPRG Recommendations for the Assessment of the
Resistance of Pipelines to External Damage, Proceeding of the EPRG/PRC,
Biennial Joint Technical Meeting On Line Pipe Research, Cambridge, April 1995
NTMC ___________________________________________________________________________ pag. 146