Biological_Microscope

'+II,()KT...\NT
-As-^FE~iv~~FEEaAUT[Ori§T-i
EiE _ ____ .=EEi
111111-
LED (llght emlttlng dlode) safety wamlng
llie LED built in this product is basically eye-safe. However, direct vlewlng the light from the LED urn for extenclecl tlme
may cause damage to the eyes.
1. After tr\e equipment has been used in an observation of a specimen that is accompanied with a potential of
infection. clean the parts coming in contact with the soecjmen tci prevent infecticin.
• Moving this product is accc)mpanied w)th the risk of dropping the Specimen. Be sure to remove the specimen before
moving this product.
• ln case the specimen is damagecl by erroneous operation, promptly take the infection prevention measures.
2. Install the microscope on a sturdy, level table or bench.
3. Always use the AC adapter and power cord provided by Olympus. If no power cord is provided, please select the proper
power cord by referring to the section "PF}OPEF` SELECTION OF THE POWEF} SUPPLY COF`D" at the end of this lnstruclion
manual. If the proper power cord is not used, product safety performance cannot be warranted.
4. Always ensure that the groundlng tomlnal of the microscope and that of the wall outlet are properly cc)nnected. If the
eqiiipment is not grounded, Olympus can no longer warrant the electrical safety performance of the equipment.
5. After operation c)r in case of abnormality, be sure to cllsconnect the power cord Of the AC adapter from the conr`ector on
the microscope or from the wall power outlet
Safety Symbols
The following symbc)ls are found on the micro§cope. Study the meaning of the symbols and always Ljse the eqLiipment
in the safest po§§ible manner.
Symbol
A
I
a
Explanatlon
Before use, cEirefully read the instruction manual. Improper use could result in personal injury to
the user and/or damage to the equipment.
lndlcates that the main switch is ON
lndicates that the maln swltch is OFF