Catálogo de Produtos - jbl selenium
Catálogo de Produtos - jbl selenium
Catálogo de Produtos - jbl selenium
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Mid Range<br />
10W16P<br />
Woofer <strong>de</strong> 10” para reprodução <strong>de</strong> médio-graves em sonorização<br />
profissional com excelente resposta <strong>de</strong> frequência. Este novo woofer é<br />
capaz <strong>de</strong> suportar potência <strong>de</strong> 600 watts <strong>de</strong> programa musical.<br />
O 10W16P é indicado para reforço <strong>de</strong> som em boates, clubes, salões,<br />
auditórios, conjuntos musicais e inclusive para caixas monitoras. É um altofalante<br />
compacto e robusto e as características <strong>de</strong> seus componentes<br />
po<strong>de</strong>m ser conferidas à seguir:<br />
A carcaça em alumínio, leve e <strong>de</strong> gran<strong>de</strong> rigi<strong>de</strong>z, o conjunto móvel é<br />
dotado <strong>de</strong> cone não prensado leve e resistente <strong>de</strong> celulose <strong>de</strong> fibras longas e<br />
suspensão <strong>de</strong> tecido impregnada. A centragem é composta por tecido<br />
resistente. A bobina é composta por fio <strong>de</strong> alumínio, corpo rígido e a<strong>de</strong>sivos<br />
resistentes às altas temperaturas.<br />
O conjunto magnético, <strong>de</strong> 169mm, <strong>de</strong> alta <strong>de</strong>nsida<strong>de</strong> <strong>de</strong> fluxo<br />
magnético, combinado com as características acima conferem ao produto<br />
alta sensibilida<strong>de</strong>.<br />
A exposição a níveis <strong>de</strong> ruído além dos limites <strong>de</strong> tolerância especificados pela Norma<br />
Brasileira NR 15 - Anexo 1*, po<strong>de</strong> causar perdas ou danos auditivos. A Selenium não se<br />
responsabiliza pelo uso in<strong>de</strong>vido <strong>de</strong> seus produtos. (*Portaria 3214 / 78).<br />
ESPECIFICAÇÕES TÉCNICAS<br />
Diâmetro nominal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 (10)<br />
Impedância nominal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8<br />
Impedância mínima @ 218 Hz . . . . . . . . . . . . . . . . . . . . . . . 7,0<br />
Potência<br />
Pico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.200<br />
1<br />
Programa Musical . . . . . . . . . . . . . . . . . . . . . . . . . . . 600<br />
2<br />
RMS (NBR 10.303) . . . . . . . . . . . . . . . . . . . . . . . . . . 300<br />
3<br />
AES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300<br />
Sensibilida<strong>de</strong> (1W@1m) média entre 150 e 3.000 Hz . . . . . 90<br />
Compressão <strong>de</strong> potência @ 0 dB (pot. nom.) . . . . . . . . . . . 2,0<br />
Compressão <strong>de</strong> potência @ -3 dB (pot. nom.)/2 . . . . . . . . . 1,3<br />
Compressão <strong>de</strong> potência @ -10 dB (pot. nom.)/10 . . . . . . . 0,2<br />
Resposta <strong>de</strong> freqüência @ -10 dB . . . . . . . . . . . . . . 70 a 4.000<br />
Freqüência <strong>de</strong> corte mínima recomendada (12dB/oit) . . . . . 50<br />
mm (in)<br />
<br />
<br />
W<br />
W<br />
W<br />
W<br />
dB SPL<br />
dB<br />
dB<br />
dB<br />
Hz<br />
Hz<br />
1<br />
Especificações para uso <strong>de</strong> programa musical e <strong>de</strong> voz, permitindo distorção harmônica<br />
máxima no amplificador <strong>de</strong> 5%, sendo a potência calculada em função da tensão na<br />
saída do amplificador e da impedância nominal do transdutor.<br />
2<br />
Norma Brasileira NBR 10.303, com a aplicação <strong>de</strong> ruído rosa durante 2 horas<br />
ininterruptas.<br />
3<br />
Norma AES 2 - 1984 (Rev. 2003).<br />
PARÂMETROS DE THIELE-SMALL<br />
Fs (freqüência <strong>de</strong> ressonância). . . . . . . . . . . . . . . . . . . . . . 66,1 Hz<br />
Vas (volume equivalente do falante). . . . . . . . . . . . . . . . . . 19,0 l<br />
Qts (fator <strong>de</strong> qualida<strong>de</strong> total). . . . . . . . . . . . . . . . . . . . . . . . 0,53<br />
Qes (fator <strong>de</strong> qualida<strong>de</strong> elétrico). . . . . . . . . . . . . . . . . . . . . 0,54<br />
Qms (fator <strong>de</strong> qualida<strong>de</strong> mecânico) . . . . . . . . . . . . . . . . . 22,96<br />
o (eficiência <strong>de</strong> referência em meio espaço) . . . . . . . . . . 0,95 %<br />
2<br />
Sd (área efetiva do cone) . . . . . . . . . . . . . . . . . . . . . . . . 0,0350 m<br />
3<br />
Vd (volume <strong>de</strong>slocado) . . . . . . . . . . . . . . . . . . . . . . . . . . . 131,3 cm<br />
Xmáx (<strong>de</strong>slocamento máx. (pico) c/ 10% distorção) . . . . . . 3,8 mm<br />
Xlim (<strong>de</strong>slocamento máx. (pico) antes do dano) . . . . . . . . 11,8 mm<br />
Condições atmosféricas no local <strong>de</strong> medição dos parâmetros TS:<br />
Temperatura . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 °C<br />
Pressão atmosférica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.047 mb<br />
Umida<strong>de</strong> relativa do ar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 %<br />
Parâmetros <strong>de</strong> Thiele-Small medidos após amaciamento <strong>de</strong> 2 horas com meta<strong>de</strong> da<br />
potência NBR.<br />
É admitida uma tolerância <strong>de</strong> ± 15% nos valores especificados.<br />
INFORMAÇÕES ADICIONAIS<br />
Material do ímã. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ferrite <strong>de</strong> bário<br />
Peso do ímã. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.563 g<br />
Diâmetro x altura do ímã. . . . . . . . . . . . . . . . . . . . . . . . . . 169 x 19 mm<br />
Peso do conjunto magnético. . . . . . . . . . . . . . . . . . . . . . . . . . . .4.452 g<br />
Material da carcaça. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Alumínio<br />
Acabamento da carcaça. . . . . . . . . . . . . . . . . . .Pintura epoxi, cor preta<br />
Material do fio da bobina. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Alumínio<br />
Material da fôrma da bobina. . . . . . . . . . . . . . . . . . . . . . . . . . .Poliimida<br />
Material do cone. . . . . . . . . . . . . . . . . . . . . . . . . . . Celulose fibra longa<br />
Volume ocupado pelo falante. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,6 l<br />
Peso líquido do falante. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.920 g<br />
Peso total (incluindo embalagem). . . . . . . . . . . . . . . . . . . . . . . .5.400 g<br />
Dimensões da embalagem (C x L x A). . . . . . . . . 28,0 x 26,3 x 15.4 cm<br />
INFORMAÇÕES PARA MONTAGEM<br />
Número <strong>de</strong> furos <strong>de</strong> fixação. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8<br />
Diâmetro dos furos <strong>de</strong> fixação. . . . . . . . . . . . . . . . . . . . . . . .6,5 x 8 mm<br />
Diâmetro do círculo dos furos <strong>de</strong> fixação. . . . . . . . . . . . . . . . . .243 mm<br />
Diâmetro do corte para montagem frontal. . . . . . . . . . . . . . . . . 230 mm<br />
Diâmetro do corte para montagem traseira. . . . . . . . . . . . . . . . 228 mm<br />
Tipo do conector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pressão p/ fio nu<br />
Polarida<strong>de</strong>. . . . . .Tensão + no borne vermelho: <strong>de</strong>slocamento p/ frente<br />
Distância mín. entre pare<strong>de</strong> da caixa e a traseira do falante. . . .75 mm<br />
PARÂMETROS ADICIONAIS<br />
L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16,0 Tm<br />
Densida<strong>de</strong> <strong>de</strong> fluxo no gap . . . . . . . . . . . . . . . . . . . . . . . . . 0,97 T<br />
Diâmetro da bobina. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 mm<br />
Comprimento do fio da bobina . . . . . . . . . . . . . . . . . . . . . . 23,6 m<br />
Coeficiente <strong>de</strong> temperatura do fio (). . . . . . . . . . . . 0,00387 1/°C<br />
Temperatura máxima da bobina. . . . . . . . . . . . . . . . . . . . . . 258 °C<br />
vc (temperatura máx. da bobina/potência máx.) . . . . . . . . 0,9 °C/W<br />
Hvc (altura do enrolamento da bobina) . . . . . . . . . . . . . . . 15,5 mm<br />
Hag (altura do gap) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,0 mm<br />
Re (resistência da bobina). . . . . . . . . . . . . . . . . . . . . . . . . . . 6,1 <br />
Mms (massa móvel). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54,4 g<br />
Cms (compliância mecânica) . . . . . . . . . . . . . . . . . . . . . . . 0,11 m/N<br />
Rms (resistência mecânica da suspensão) . . . . . . . . . . . . . 1,0 kg/s<br />
Ø260<br />
6,5x8 (8x)<br />
Ø228<br />
Ø169<br />
129<br />
PARÂMETROS NÃO-LINEARES<br />
Le @ Fs (indutância da bobina na ressonância) . . . . . . . . . 2,799<br />
Le @ 1 kHz (indutância da bobina em 1 kHz) . . . . . . . . . . . 1,499<br />
Le @ 20 kHz (indutância da bobina em 20 kHz) . . . . . . . . . 0,752<br />
Red @ Fs (resistência <strong>de</strong> perdas na ressonância) . . . . . . . . 0,36<br />
Red @ 1 kHz (resistência <strong>de</strong> perdas em 1 kHz) . . . . . . . . . . 3,69<br />
Red @ 20 kHz (resistência <strong>de</strong> perdas em 20 kHz) . . . . . . . 48,55<br />
Krm (coeficiente da resistência <strong>de</strong> perdas) . . . . . . . . . . . . . . . 2,0<br />
Kxm (coeficiente da indutância da bobina) . . . . . . . . . . . . . . 11,2<br />
Erm (expoente da resistência <strong>de</strong> perdas da bobina). . . . . . . 0,86<br />
Exm (expoente da indutância da bobina) . . . . . . . . . . . . . . . 0,77<br />
mH<br />
mH<br />
mH<br />
<br />
<br />
<br />
m<br />
mH<br />
Ø243<br />
47 69 12<br />
Dimensões em mm