PRESSÕES EM SILOS ESBELTOS COM DESCARGA EXCÊNTRICA

176
ROBERTS, I. 1884. Pressure of stored grain. Engineering, Vol.34, pp.399, Oct. 27.
Roberts, A.W. Storage, flow and handling of bulk solids. The University of Newcastle.
Australia, v.único, p.103–135, 1987.
ROMBACH G; NEUMANN F. 3-D finite element modeling of granular flow in silos. 17 th
ASCE Engineering Mechanics Conference June 13-16, 2004, University of Delaware,
Newark, DE
ROMBACH, G.A.; AYUGA, F.; GALLEGO, E.; NEUMANN, F. 2005. Filling and discharging
simulations with different Finite Element programmes - ANSYS VS. SILO.
RONG, G. H. 1994. Discrete element modeling for flow of particulate material in bins. PhD
diss. Guelph, Ontario, Canada: University of Guelph, School of Engineering.
ROTTER J. M., OOI, J. K., CHEN, J. F., TILEY, P. J., MACKINTOSH, I. e BENNET, F. R.
(1995) “Flow Pattern Measurement in Full Scale Silos”, British Materials Handling Board.
London, 230pp.
ROTTER, J. M. (1986), The Analysis of Steel Bins Subject to Eccentric Discharge, Proc.,
Second Int. Conf. Bulk Materials Storage Handling and Transportation, IEAust., Wollongong,
pp 264-271
ROTTER, J. M.; HOLST, F.G.; OOI, J. Y.; SANAD, M. (1998). Silo pressures predictions
using discreteelement and finite-element analyses. Phil. Trans. R. Soc. of London:
Philosophical Transaction: Mathematical, Physical and Engineering Sciences. Series A.
(356). pp. 2685-2712.
ROTTER J. M. The analysis of steel bins subject to eccentric discharge. Proceedings of the
Second International Conference on Bulk Material Storage, Handling and Transportation,
Wollongong, 7–9 Jul.; 1986. p. 264–71.
ROTTER J. M; TENG J. G. Elastic stability of cylindrical shells with weld depressions. J.
Struct. Eng., ASCE 1989;115(5):1244–63.
J. M. ROTTER, J. M. F. G. HOLST, J. Y. OOI e A. M. SANADY (1998). Silo pressure
predictions using discrete-element and Finite-element analyses Phil. Trans. R. Soc. Lond. A
356, 2685-2712.
ROTTER, J.M. (2001) Pressures, stresses and buckling in metal silos containing
eccentrically discharging solids. 60th Birthday Celebration for Univ-Prof Dipl-Ing Dr.techn.
Richard Greiner, Oct. 12, Institute for Steel, Timber and Shell Structures, Technical
University Graz, Austria. 2001.
RONG, G. 1994. ‘‘Discrete element modeling for flow of particulate materials in bins.’’ PhD
thesis, University of Guelph, Ont., Canada.
RONG G H; NEGI S C; JOFRIET J C. 1995. Simulation of ßow behavior of bulk solids in
bins. Part 1: model development and validation. Journal of Agricultural Engineering
Research, 62, 247-256
SAFARIAN, S S Design pressures of granular materials in silos. ACI Journal New York. 1969
SCHULZE, D. 1996: Flowability of bulk solids – Definition and measuring techniques, Part I
and II, Powder and Bulk Engineering 10 4, pp. 45–61, and 10 (1996) 6, pp. 17–28