PRESSÕES EM SILOS ESBELTOS COM DESCARGA EXCÊNTRICA

172
COMPANHIA NACIONAL DE ABASTECIMENTO – CONAB (2007).
http://www.conab.com.br/
COULOMB, C.A. (1773). "Essai sur une application des régles de maximis et
minimis à quelques problémes de statique relatifs a l'architecture". Mémoires de
Mathématique et de Physique, présentés à l'Académie Royale des Sciences par Divers
Savants et lus dans ses Assemblées, 7, Paris, France, 343-382.
COUTO, A; GUAITA, M.; AYUGA, F.; AGUADO, P. Analysis of Static Pressures in
Cylindrical Silos With Eccentric Outlet Hopper Using F.E.M. Models. Thin-Walled Struct, v.5,
p. 98-101, 2000.
COUTO, A. Métodos avanzados de cálculo de presiones estáticas en silos cilíndricos y
prismáticos con tolva excéntrica mediante el método de los elementos finitos. 2000. Tese
(Doutorado). Politechnic University of Madrid, 2000.
COUTO A; VIDAL P; MOYA M. 2003. INFLUENCIA DE LOS PARÁMETROS ELÁSTICOS
EN LA ESTIMACIÓN DE EMPUJES EN LAS PAREDES DE LOS SILOS CON TOLVA
EXCÉNTRICA Y SU COMPARACIÓN CON EL EUROCÓDIGO- 1. ANÁLISIS EN 3-D
MEDIANTE EL M.E.F.
DEUTSCH, G P; CLYDE D H. 1967. Flow and pressure of granular materials in silos.
Proceedings of the ASCE 93 (EM6); 103-125.
DEUTSCHE NORM DIN 1055 Part 6 – Design loads for buildings; Loads in silos bins. Berlin,
Verlaz, 1987.
DRUCKER, D.C.; PRAGER, W. Soil mechanics and plastic analysis or limit design. Quarterly
of Applied Mathematics, v. 7, n. 411-418, pp 157-165, 1952.
Eibl J., Landahl H., Häußler U., and Gladen W., 1982. Zur fragedes silodrucks. Beton- und
Stahlbetonbau, 77, 104-110.
EUROPEAN COMMITTEE OF STANDARDIZATION. PrEN 1991-4: Actions on silos and
tanks, CEN, Brussels. 2002.
ENSTAD G.G., 1983. The ultimate critical outlet width for flow in mass-flow hoppers. Chemie
Ingenieur Technik, 55(2), 154-155.
FREITAS, E. G. Estudo teórico e experimental das pressões em silos cilíndricos de baixa
relação altura/diâmetro e fundo plano. 2001. 175p. Tese (Doutorado) - Escola de Engenharia
de São Carlos, Universidade de São Paulo, São Carlos, 2001.
GALLEGO 2006. Numerical Simulation of Loads Exerted by Stored Materials in Silos with
non-Elastic Material Models. Polytechnic University of Madrid.. Escuela Técnica Superior de
Ingenieros Agrónomos. Department of Construction and Rural Roads. PhD Thesis.
GALLEGO, E.; GOODEY, R. J.; AYUGA, F.; BROWN, C. J. Some practical features in
modelling silos with finite elements. ASAE Paper No. 044150. St. Joseph, Mich.: ASAE.
Proc. of the 2004 ASAE/CSAE Annual International Meeting. Ottawa, August 2004.
GILLIE M., ROTTER J.M.. The effects of patch loads on thin-walled steel silos. Thin-Walled
Struct 2002;40:835–52.
GIUNTA, J S. Flow patterns of granular materials in flat-bottom bins. Transactions of the
ASME, Journal of Engineering for Industry, 1991. Ser. B, No. 2, pp. 406-413.