Manual Técnico Sensepoint XCD Detector de gás - Digimed
Manual Técnico Sensepoint XCD Detector de gás - Digimed
Manual Técnico Sensepoint XCD Detector de gás - Digimed
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Manual</strong> técnico do <strong>Sensepoint</strong> <strong>XCD</strong> SP<strong>XCD</strong>HMANEN 3ª Edição<br />
17.4 Desenho <strong>de</strong> cone <strong>de</strong> coleta<br />
<br />
<br />
<br />
<br />
26.65° 1.00<br />
<br />
<br />
14.00<br />
<br />
6.30<br />
1.60<br />
61.1<br />
Ø<br />
NOTES<br />
1. General draft angle 1° unless otherwise stated<br />
2. Internal Radii: 0.2 Max unless otherwise stated<br />
3. Component Volume: 4.68 cm^3<br />
4. The position of feed points, split lines and<br />
ejectors to be agreed by HAAP before tool<br />
production commences (Max permissable flash<br />
0.02)<br />
5. PTFE, SILICONE or STEARAE RELEASE<br />
AGENTS must not be used during manufacture.<br />
6. The CAD DATA to be used as the master<br />
information for producing this component.<br />
Dimensions on this drawing are for reference only.<br />
7. All surfaces to be free from sink marks,<br />
machining marks, scratches and other blemishes.<br />
48.00<br />
75.0<br />
138.8<br />
52<br />
2.3<br />
10.0<br />
2.30<br />
2.3<br />
22.2<br />
5.00<br />
88.00<br />
<br />
<br />
<br />
<br />
05/Nov/08<br />
<br />
<br />
PPS R-4 230BL<br />
BEN<br />
<br />
<br />
1/1<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
A<br />
1
Change language