Tongue-force Measuring Device HZM - Hanning & Kahl

Geared up for full serviceAs different measuring pins are available, the HZM canbe used to measure force on different makes of pointmachinesPerfect force testing on pointmachinesAs a compact integration of load-measuringpin and display, the newly-developedtongue-force measuring device called HZMprovides everything required for perfectforce testing on point-setting systems. Thehandy, ultra-light and versatile measuringdevice with comprehensive accessories fulfilsmany practical requirements. Compactdesign, simple operation, long operatingtime and service life, large memory, highprotection class make the HZM a reliableinstrument, especially when in permanentuse. Setting force, setting resistance andholding force can be measured precisely,conveniently and at speed.Load-measuring pinMeasuring pins no longer have to be calibratedbefore each measurement. AnEEPROM memory in the connector of theload-measuring pin stores calibration,manufacturer and other data. The intelligentsolution prevents incorrect pin calibrationby the operator. As the pins can be locked,measurements can be safely madewhen trains are crossing points.The HZM has two measuring channels which means thatmeasurements can be made with two different measuringpins at two locations at the same timeTechnical Data- Internal memory 2 GB- Power supply 8,5 V DC with power pack- Interface RS 232 and USB- Connection of external memoriespossible (e. g. USB stick)- LC display 64 x 128 pixel- Temperature and humiditymeasurement- IP 54 protection- Bluetooth interface for the mobile printerRudolf-Diesel-Straße 6D-33813 OerlinghausenPhone +49 5202 707-600Fax + 49 5202 707-629info@hanning-kahl.comwww.hanning-kahl.deGmbH & Co KG06/2011