Bruksanvisning fÃƒÂ¶r persienn Bruksanvisning for persiennen ... - Jula

More documents

Recommendations

Info

ENGLISHENGLISHRead these instructions carefully before use!Package contents 1 blind 3-4 brackets 12-14 screwsBracketsINSTALLATIONHead railCord lockBottom railBracketInstallation of blind1. Measure where you want the blind. It can be fitted inside (A)or outside (B) the window recess.2. Position the end brackets (on the ceiling or wall) and makesure that they are approx. 5 cm inside the ends of the blind.The centre bracket (required for blinds wider than 120 cm)can be positioned as required.BlindBlindNOTE! Position the brackets so that they do not interfere with themechanism of the blind.3. Now fit the blind in the brackets. Make sure that the lugs arepositioned exactly under the front rim of the head rail. Thenpush the locking arm in until it is flush with the head rail.Ceiling installationWall installationLocking8
ENGLISHShortening the length1. Remove the bottom rail buttons.2. Untie the knot in the cord3. Remove the bottom rail and extra slats.4. Refit the bottom rail and tie a new knot.5. Cut off excess tape, leaving 2.5 cm on the ends. Insert theends into the holes in the bottom rail. Refit the buttons.6. Centre supports are provided for wide blinds only (i.e. 120cm or more).Shortening the widthAs illustrated, the slats can easily be shortened using scissors.Cleaning the blindMAINTENANCEThe blind is easily cleaned using a blind cleaner (not included).Subject to printing errors and design changes over which we have no control. In the event of problems,please contact our service department.www.jula.com9
Page 4 and 5: NORSKNORSKLes bruksanvisningen nøy
Page 6 and 7: POLSKIPOLSKIPrzed użyciem uważnie

Bruksanvisning fÃƒÂ¶r persienn Bruksanvisning for persiennen ... - Jula

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?