2007 - 2008 Nissan 350Z Twin Turbo Parts List - GTM Motorsports

High Performance Twin Turbo Systems2007 ‐ 2008 Nissan 350Z Twin Turbo Parts ListRevision 1.08 3/11/09

Couplers and Clamps:• (1) 3” 45 degree coupler 76mm(P/N:GTM‐044‐9‐9)• (2) 3” x 2.5” Transition Hose 76mm‐63mm(P/N: GTM‐042‐9‐7)• (2) 3” Straight hump hose 76mm(P/N: GTM‐043‐9‐9)• (2) 2.5” Straight hump hose 63mm(P/N: GTM‐043‐7‐7)• (1) 3” Straight hose 76mm(P/N: GTM‐041‐9‐9)• (4) 2.5” Straight hose 63mm(P/N:GTM‐041‐7‐7)• (2) 3” x 2.75” Transition hose 76mm‐70mm(P/N: GTM‐042‐9‐8)• (1) 2.5” 90 degree coupler 63mm(P/N:GTM‐046‐7‐7 )

• (2) 2” Straight hose 51mm(P/N:GTM‐041‐5‐5)• (2) 73mm‐81mm Hose Clamp(P/N:GTM‐050‐8)• (4) 54mm‐62mm Hose clamp(P/N:GTM‐050‐5)• (10) 79mm‐87mm Hose Clamp(P/N:GTM‐050‐9)• (16) 67mm‐75mm Hose clamp(P/N:GTM‐050‐7)

Intercooler and mounting hardware:• (1) Intercooler Assembly(P/N:GTM‐013‐1)• (6) 8x1.25x20mm S.S. Allen bolt(P/N:GTM‐068‐2‐A)• (1) Intercooler bracket pair L & R(P/N:GTM‐013‐01‐2)• (6) 8mm large washers(P/N:GTM‐072‐2)

• (2) K&N intake air filter(P/N:GTM‐030‐3)Turbo kit pipes, total of 13:• (1) Left (driver) side filter intake pipe(P/N:GTM‐01201‐017)• (1) Right (passenger) side throttle intake pipe(P/N:GTM‐01301‐029)• (1) Right (passenger) side turbo outlet pipe(P/N: GTM‐01301‐027)• (1) Left (driver) side intercooler outlet pipe(P/N:GTM‐00301‐018)• (1) Left (driver) side throttle intake pipe(P/N:GTM‐01301‐028)• (1) Right (passenger) side turbo intake pipe(P/N:GTM‐00301‐019)

• (1) Left (driver) side intercooler inlet pipe(P/N:GTM‐00301‐020)• (1) Left (driver) side intermediate turbo inletpipe (P/N:GTM‐00301‐025)• (1) Right (passenger) side intercooler outletpipe (P/N:GTM‐00301‐021)• (1) Left (driver) side turbo outlet pipe(P/N:GTM‐00301‐026)• (1) Left (driver) side turbo inlet pipe(P/N:GTM‐00301‐022)• (1) Right (passenger) side intercooler inlet pipe(P/N:GTM‐00301‐023)• (1) Right (passenger) side turbo inlet pipe(P/N:GTM‐00301‐024)

Oil/water lines and hardware:• (1) GTM oil distribution block(P/N:GTM‐TTI‐1)• (1) Right turbo feed oil line, ‐4AN hose short(P/N:GTM‐01303‐002)• (1) GTM 1/8NPTx1/8BSP male‐male adapter(P/N:GTM‐010‐2)• (1) 7/16‐24 banjo bolt, turbo oil feed(P/N:GTM‐010‐5)• (2) 1/8NPT x ‐4(P/N:GTM‐010‐3)• (1) 7/16”x‐4AN Banjo bolt, turbo oil feed(P/N:GTM‐010‐7)• (1) Left turbo oil feed, ‐4AN hose long(P/N:GTM‐01403‐001)• (2) 7/16” Copper crush washer(P/N:GTM‐010‐6)

• (1) ‐4ANx7/16”‐24 adapter(P/N:GTM‐010‐4)• (3) 14mm Banjo bolt(P/N:GTM‐020‐2)• (1) GTM Water line crossover(P/N:GTM‐01404‐004)• (7) 14mm Banjo bolt crush washer(P/N:GTM‐020‐3)• (1) Water line w/ 45*/90* ends, left turbo(P/N:GTM‐01404‐007)• (3) 14mm x ‐6AN banjo adapter(P/N:GTM‐020‐4)• (1) Water line w/ 90*/straight ends, right turbo(P/N:GTM‐01204‐006)• (1) 14mm x ‐6AN straight adapter(P/N:GTM‐020‐5)• (2) T‐fitting 3/4x3/4x‐6AN(P/N:GTM‐020‐1)• (1) 3/8” NPT x 5/8” barb fitting(P/N:GTM‐010‐8)

• (4) 8x1.25x20mm Allen head bolt(P/N:GTM‐058‐2‐8)• (4) 8mm lock washer(P/N:GTM‐073‐2)

Steering:• (1) Power steering cooler bracket(P/N:GTM‐015‐2)• (1) GTM Steering Couplers(P/N:GTM‐015‐1)• (2) 6x1.0mm lock nut(P/N:GTM‐054‐1)• (1) 5/16”‐18x3/8” Locking set screw(P/N:GTM‐015‐8)• (2) 6x1.0x20mm bolts(P/N:GTM‐056‐1‐8)• (1) 5/16”‐18x1” Set screw(P/N:GTM‐015‐7)• (72”) 3/8” Power steering hose(P/N:GTM‐080‐2)• (1) 5/16” Jam nut(P/N:GTM‐052‐5)

Internal waste gate:• (2) Waste gate actuator(P/N:GTM‐092‐ )• (2) 6x1.0 Jam nut(P/N:GTM‐052‐1)• (2) Actuator arm(P/N: GTM‐091‐2)• (12) 6x1.0 Lock nut(P/N:GTM‐054‐1)• (2) Actuator bracket(P/N: GTM‐091‐3)• (2) External W.G. block off plate(P/N:GTM‐01402‐09‐P)• (2) E‐clip(P/N: GTM‐091‐1)• (8) 6x1.0x27.5mm Stud(P/N:GTM‐051‐AB)

• (2) 6mm Vacuum “T” fitting(P/N: GTM‐083‐5)• (1) 1/8” NPT x 3/16” hose barb(P/N:GTM‐084‐3)• (10’) 6mm Vacuum hose(P/N:GTM‐085‐4)• (1) Right O2 housing(P/N: GTM‐01402‐05‐6)• (1) Left O2 housing(P/N: GTM‐01402‐05‐5)

External waste gate:• (2) 38mm TiAL waste gate w/ hardware(P/N:GTM‐001‐1)• (10’) 6mm Vacuum hose(P/N:GTM‐085‐5)• (1) Left waste gate tube(P/N: GTM‐01402‐10‐A‐L)• (1) 1/8” NPT x 3/16” Hose barb(P/N: GTM‐084‐2)• (1) Right waste gate tube(P/N: GTM‐01402‐10‐A‐R)• 3” GTM Turbo downpipe (right)(P/N:GTM‐01402‐05‐8‐R)• (2) 6mm Vacuum “T” fitting(P/N:GTM‐083‐2)• 3” GTM Turbo downpipe (left)(P/N:GTM‐01402‐05‐8‐L)

• (2) External W.G. block off plate(P/N:GTM‐01402‐09‐P)• (1) External W.G. open dump tube (right)(P/N:GTM‐01402‐09‐B‐R)• (1) External W.G. recirculation tube (right)(P/N:GTM‐01402‐08‐C‐R)• (2) 6x1x27.5mm stud(P/N:GTM‐051‐1‐AB)• (1) External W.G recirculation tube (left)(P/N:GTM‐01402‐08‐C‐L)• (2) 6x1mm flange lock nut(P/N:GTM‐054‐1)• (1) External W.G. open dump tube (left)(P/N:GTM‐01402‐09‐B‐L)• (6) 6x1x25mm flange bolt(P/N:GTM‐056‐1‐A)

• (3) 8x1.25x30mm flange allen bolt(P/N:GTM‐057‐2‐C)• (2) 10x1.25x30mm flange bolt(P/N:GTM‐056‐3‐B)• (4) 8x1.25mm flange lock nut(P/N:GTM‐054‐2)• (2) 10x1.25mm flange lock nut(P/N:GTM‐054‐3)• (1) 8x1.25x35mm stud(P/N:GTM‐051‐2‐C)• (2) ¼” Steel spacer(P/N:GTM‐070‐4)

Chassis:• (2) ¼” Large engine mount spacer(P/N:GTM‐070‐5)• (10”) 3/8” Split loom(P/N:GTM‐031‐1)Blow off valve:• (2) TiAL Blow off valves(P/N:GTM‐097‐1)• (2) 6mm Vacuum “T”(P/N:GTM‐083‐5)• (10’) 6mm Vacuum hose(P/N:GTM‐085‐4)• (3) 1/8” NPT x 3/16” Hose barb(P/N:GTM‐084‐3)

Automatic transmission supplement:• (Optional) GTM H.D. transmission cooler kit(P/N:GTM‐014)• (2) ‐6AN Push lock fitting(P/N:GTM‐020‐7)• (2) ‐6AN banjo adapter(P/N:GTM‐020‐4)• (12’) 3/8” PL Hose(P/N:GTM‐080‐2)• (2) Aluminum washer(P/N:GTM‐020‐3)