User Manual - Ruwido

User ManualDetermining the 4-digit code found byautomatic code search (after using searchfacility)It is useful to know which code your device responded toin case it is inadvertently changed at any later date.Step 1 Choose the device you want to control by turningthe adjusting ring until the printed ”TV”, ”VCR” or”SAT” is inline with the pointer on the housing ofyour remote.Step 2 Press and hold the (F) key until the LED flashes 3times twice. (approx 2 seconds)Step 3 After the two flashes and within 5 seconds inputthe code 1112. After you have input the code, waitfor the LED to flash twice, this confirms that thenumber you selected has been installed into theunit correctly.Step 4 To determine the stored code press the followingkeys:upfor the first digitleftfor the second digit(OK/Norm) for the third digitrightfor the fourth digitAfter pressing one of these keys, count the numberof flashes emitted by the LED. As long as you donot exceed 5 seconds between each process youcan press any of these keys as often as you want.So you do not have to hurry or panic if you miss aflash.Make sure that you count the flash that occursincluding the initial flash when depressing the key.Helpline 00800 31133113 9NL Gebruiksaanwijzing F Mode d’emploiI Istruzioni per l’uso D Bedienungsanleitung GB User Manual