User Manual - Ruwido

User ManualTroubleshooting• LED not illuminatingCheck installation of batteries.Check battery life and replace if necessary.• TV will not go into standby modeWrong code selected.Search mode not completed.The unit may not be compatible with your brand/type ofTV or your TV is no longer supported because ofincreasing age. (If in doubt check with the Helpline)• Programme + or – not workingWrong code selected or not supported by the TV.• AV Key not workingWrong code selected or not supported by the TV.• Your TV is not listedIt may still work, try the Search facility.• Why do some functions work on some codes and then donot on another?This is because the remote simulates functions from theoriginal item. For example, some of the codes maysupport Teletext as per the original, however, someoriginal remotes did not have this feature so undercertain codes, the Z3 will not support this feature either.If this happens then try the next code in the list• I found a code which puts my TV in standby mode but someof the functions aren’t working correctlyYou have found a code which is partially compatible withyour TV, this could happen even when using specificcode numbers against your particular brand, if so, moveto the next code in the list and try again.• I have run through the Search Mode for at least 15 minutes,but my TV/SAT/VCR has not responded at all!It is very likely that your TV/SAT/VCR is one of the fewmodels that are not compatible with the Easytip Z3.Please contact our helpline to find out if we can offer analternative solution.16Helpline 00800 31133113