User Manual - Ruwido

User ManualControlling the Colour & BrightnessIf the controlling of brightness and colour is not possible inthe menu and if your original remote has special functionkeys for these functions, follow the instructions below.Step 1 Press the (M) key quickly. The LED must flash once.If the LED illuminates continuously, the menucontrol is activated. To control the menu, refer to”Menu control” above.If, after pressing the (M) key, the LED does notflash at all the stored code does work with neitherthe TV nor the analog functions.Step 2 To change the brightness press the (Programme +)key, to change the colour press the (Programme -)key. When pressing these keys, the LED mustilluminate continuously confirming that thecontrolling is possible.Step 3 Now you can adjust the chosen analog function(brightness or colour) by pressing the (Volume +)and (Volume -) keys.Step 4 To quit the analog function mode just wait 10seconds or press the (F) key.Controlling (Programme +) and (Programme -)With some, especially older, TV models it may be notpossible to switch channels by pressing the (Programme +)and (Programme -) keys. Check the manufacturersoperating manual or the original remote of your TV if itsupports this function.14Helpline 00800 31133113