CG40EK (LP) CG40EYA (TP) - Hitachi

More documents

Recommendations

Info

Be careful of thrown objects. Use anti-slip and sturdy footwear. Max 9,900rpm Shows maximum shaft speed. Do not use the cutting attachment whose max rpm is below the shaft rpm. Blade thrust may occur when the spinning blade contacts a solid object in the critical area. A dangerous reaction may occur causing the entire unit and operator to be thrust violently. This reaction is called BLADE THRUST. As a result, the operator may lose control of the unit which may cause serious or fatal injury. Blade thrust is more likely to occur in areas where it is difficult to see the material to be cut. Do not attach handle above this point Gloves should be worn when necessary, e. g., when assembling cutting equipment. Indicates handle location. Do not attach handle above this point. WARNING! Read the Operator's Manual and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and /or bystanders. Objects may be thrown or ricochet in all directions. ALWAYS WEAR EYE PROTECTION. Keep bystanders at least 50 feet (15m) away. To reduce the chance of hearing loss, always wear ear protection. To reduce the risk of injury from loss of control, never use a metal blade on a curved shaft grass trimmer. Never use a metal blade on any brushcutter without barrier bar or bicycle handle configuration and safety strap Use of a blade may cause a sudden sideways, forward or backward motion of the brushcutter when the blade contacts a solid object. See Owner's manual for model specific details. Before using your machine Read the manual carefully. Check that the cutting equipment is correctly assembled and adjusted. Start the unit and check the carburetor adjustment. See "Maintenance". GB-3
Declaration of conformity We, Nikko Tanaka Engineering Co., Ltd., 3-4-29 Tsudanuma, Narashino, Chiba, Japan Declare under our sole responsibility that the product, brushcutter model CG40EK (LP) CG40EYA (TP) to which this declaration relates is in conformity with the essential safety requirements of directives. 98/37/EC, 89/336/EEC, 2000/14/EC The following standards have been taken into consideration ISO 7112/7113/7916/7917/7918/8380/11682 (EN ISO 12100-1/2, EN ISO 11806) Manufactured at : Chiba, Japan Signature: Yoshio Osada Serial No. up from E670001 Position:Director Index What is what Warnings and safety instructions Assembly procedures Operating procedures Maintenance Specifications 5 6 7 11 13 16 GB-4
Page 1 and 2: CG40EK (LP) CG40EYA (TP) Owner's ma
Page 3: Meanings of symbols or labels. (NOT
Page 7 and 8: 2. Warnings and safety instructions
Page 9 and 10: Fig. 1-4 Fig. 1-5 Fig. 1-6 Throttle
Page 11 and 12: Fig. 1-10 Fig. 1-10B 5 17cm 17cm CH
Page 13 and 14: Fig. 2-4 Fig. 2-4B Fig. 2-4C 15m Fi
Page 15 and 16: Fig. 3-4 Fig. 3-5 Fig. 3-5B 1 2 R1-
Page 17 and 18: 6. Specifications MODEL CG40EK (LP)
Page 19 and 20: Betydelser av Symboler eller etiket
Page 21 and 22: vi,Nikko Tanaka Engineering Co., Lt
Page 23 and 24: 2. Varning och säkerhets-anvisning
Page 25 and 26: Fig. 1-4 Fig. 1-5 Fig. 1-6 Gasspjal
Page 33 and 34: 6. Tekniska data MODELL CG40EK (LP)
Page 35 and 36: Betydning af symboler og mærker. (
Page 37 and 38: Overensstemmelseserklæring Vi, Nik
Page 39 and 40: 2. Advarsler og sikkerhedsinstrukti
Page 41 and 42: Fig. 1-4 Fig. 1-5 Fig. 1-6 Kabel ti
Page 49 and 50: 6. Specifikationer MODEL CG40EK (LP
Page 51 and 52: Betydning av symboler og etiketter.
Page 53 and 54: Konformitetserklæring Vi, Nikko Ta
Page 55 and 56:
2. Advarsler og sikkerhetsinstruksj
Page 57 and 58:
Fig. 1-4 Fig. 1-5 Fig. 1-6 Gass-st
Page 59 and 60:
Fig. 1-10 Fig. 1-10B 5 17cm 17cm CH
Page 61 and 62:
Fig. 2-4 Fig. 2-4B Fig. 2-4C 15m Fi
Page 63 and 64:
Fig. 3-4 Fig. 3-5 Fig. 3-5B 1 2 R1-
Page 65 and 66:
6. Tekniske data MODEL CG40EK (LP)
Page 67 and 68:
Symbolien tai tarrojen merkitys. (H
Page 69 and 70:
Vaatimustenmukaisuusilmoitus Me,Nik
Page 71 and 72:
2. Varoitukset ja turvallisuusohjee
Page 73 and 74:
kuva. 1-4 kuva. 1-5 kuva. 1-6 Kaasu
Page 75 and 76:
kuva. 1-10 kuva. 1-10B 5 17cm 17cm
Page 77 and 78:
kuva. 2-4 kuva. 2-4B kuva. 2-4C 15m
Page 79 and 80:
kuva. 3-4 kuva. 3-5 kuva. 3-5B 1 2
Page 81 and 82:
6. Tekniset tiedot MODEL CG40EK (LP
Page 83 and 84:
15m 50FT 15m 50FT
Page 85 and 86:
5 6 7 11 13 15 RU-4
Page 87 and 88:
RU-6
Page 89 and 90:
RU-8
Page 91 and 92:
5 17cm 17cm CH-100
Page 93 and 94:
15m
Page 95 and 96:
1 2 R1-1.5 mm 1.9-2.2 mm
Page 97 and 98:
MODEL CG40EK (LP) CG40EYA (TP)
show all

CG40EK (LP) CG40EYA (TP) - Hitachi

Create successful ePaper yourself

Delete template?

Save as template?