08.01.2015 Views

Istruzioni d'uso - Waeco

Istruzioni d'uso - Waeco

Istruzioni d'uso - Waeco

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

_MF-1W.book Seite 18 Freitag, 7. Dezember 2007 4:20 16<br />

Operation<br />

MyFridge<br />

6.3 Inserting/replacing the batteries<br />

The wine cooler is powered by standard AA batteries (1.5 Volts) inserted into<br />

the battery box. This battery box is then inserted into the device.<br />

You can also use rechargeable AA batteries (NiMH, 1.2V, batteries, at least<br />

2100 mAh).<br />

Caution! Danger of injury!<br />

Batteries contain aggressive and caustic acids. Avoid battery fluid<br />

coming into contact with your body. If your skin does come into contact<br />

with battery fluid, wash the part of your body in question thoroughly<br />

with water.<br />

Caution!<br />

When using the battery box, make sure that the two metal contacts<br />

never touch electricity-conducting parts at the same time, since<br />

this could lead to a short circuit and damage the device.<br />

Caution!<br />

Make sure to insert the batteries in the proper polarity. Incorrectly<br />

inserted batteries can also lead to a short circuit in the device. Insert<br />

the batteries with the minus pole (flat side) touching the spring.<br />

➤ Remove the battery box from the device (if necessary or desired, see<br />

2 4, page 3).<br />

➤ Push the two buttons (3 1, page 4) to the center and open the lid (3 2,<br />

page 4).<br />

➤ If necessary, remove the old batteries from the battery box.<br />

Protect the environment!<br />

Do not dispose of empty batteries in general household waste.<br />

Return empty rechargeable batteries to your retailer or take them<br />

to a collection point.<br />

➤ Insert eight AA batteries into the battery box. Make sure the polarity is<br />

correct.<br />

➤ Close the lid by placing it slightly offset onto the charge box and pushing<br />

it until the clips snap in.<br />

➤ Push the battery box, contact springs first, into the device until it audibly<br />

latches in place.<br />

18

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!