Instrukcja obsługi - Jula

ENGLISH
DESCRIPTION
1. Electronic speed control
2. Mechanical speed control I/II
3. Mixer
4. Mixer socket M14
5. Power switch ON/OFF
6. Power switch lock
The tool is intended to be used for mixing building materials and paint. Heavy materials, such as cement/
concrete can also be quickly and effi ciently mixed. The tool has two speed settings for different materials.
Use
1. Hold the tool fi rmly with both hands.
2. Start the tool by fi rst pressing in the power switch lock and then the power switch.
3. Switch off by pressing in and releasing the power switch.
Before use
1. Fit the mixer in the socket.
2. Tighten the nut.
Starting
1. Hold the tool fi rmly with both hands.
2. Press in the power switch lock and press the power switch.
Mechanical speed control
1. Switch off the tool and turn the knob to the required speed setting.
2. If it is not possible to change the speed, turn the mixer a little and try again.
Electronic speed control
Press the power switch and turn the knob to the required speed.
Stopping
Release the power switch to stop the tool.
USE
24