Instrukcja obsługi - Jula
Instrukcja obsługi - Jula
Instrukcja obsługi - Jula
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENGLISH<br />
• Keep the work area clean and well lit.<br />
• Check that the mains voltage corresponds to the rated voltage on the type plate.<br />
• The tool must be connected to an earthed socket.<br />
• Avoid overloading.<br />
• If using the tool outdoors, only use an extension cord approved for outdoor use. Check that the crosssection<br />
of the extension cord’s conductors is suffi cient for the motor’s power supply. Never pull the power<br />
cord to remove the plug from the mains socket. Keep the power cord away from heat, oil and sharp edges.<br />
• Do not use the tool if the cord or plug is damaged.<br />
• Unplug the power cord before performing maintenance and/or cleaning and when the tool is not in use.<br />
• The tool must not be used for mixing material with a fl ash point lower than 21°C.<br />
• Do not use solvent to clean the tool – risk of explosion.<br />
• Do not use the tool in explosive environments, such as in the vicinity of fl ammable liquids, gases or dust.<br />
• Make sure that the mixing drum is standing on a level surface.<br />
• Do not start the tool until the mixer is immersed in the mixing drum.<br />
• Do not run the tool with no load.<br />
• Do not lift up the mixer from the mixture until all moving parts have completely stopped. Make sure that the<br />
mixer does not come into contact with the mixing drum while the tool is running.<br />
• Do not start the tool in a mixing drum containing hardened material.<br />
• Wear eye and ear protection.<br />
• Only use original spare parts.<br />
TECHNICAL DATA<br />
Rated voltage<br />
Output<br />
Speed (no load)<br />
Spindle size<br />
Mixer diameter<br />
Sound pressure level, LpA<br />
Sound power level, LwA<br />
Vibration level<br />
230 V ~ 50 Hz<br />
1200 W<br />
I: 0-500 rpm<br />
II: 0-700 rpm<br />
Ø 14 mm<br />
120 mm<br />
89 dB(A), K=3 dB<br />
100 dB(A), K=3 dB<br />
5.7 m/s², K=1.5 m/s²<br />
Always wear ear protection!<br />
The declared vibration value, which has been measured by a standardised test method, can be used to<br />
compare different tools with each other and for a preliminary assessment of exposure.<br />
WARNING The actual vibration level when using power tools may differ from the specifi ed maximum value,<br />
depending on how the tool is used. It is therefore necessary to determine which safety precautions are required<br />
to protect the user, based on an estimate of exposure in actual operating conditions (taking into account all<br />
stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the<br />
start-up time).<br />
23