You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 609 929 894 - Buch Seite 1 Mittwoch, 1. Oktober 2003 9:10 09<br />
Tool Specifications<br />
Electric tacker <strong>PTK</strong> <strong>19</strong> E<br />
Order number 0 603 265 0..<br />
Impact rate<br />
Intermittent operation,<br />
[bpm] 30<br />
max. [min] 15<br />
Staple width [mm] 6/11.4<br />
Staple length (6 mm)<br />
Staple length<br />
[mm] 12 – <strong>19</strong><br />
(6 mm resin-covered) [mm] <strong>19</strong><br />
Staple length (11.4 mm) [mm] 8 – 18<br />
Nail/pin length<br />
Magazine capacity,<br />
[mm] 16 – <strong>19</strong><br />
max.<br />
Weight without cable,<br />
100<br />
approx. [kg] 1.5<br />
Protection class / II<br />
Please observe the order number of your machine. The<br />
trade names of the individual machines may vary.<br />
mikosoft praha s.r.o.<br />
Machine Elements<br />
The numbering of the machine elements refers to<br />
the representation of the machine on the graphics<br />
page.<br />
1 Trigger lock<br />
2 Trigger<br />
3 Storage indicator<br />
4 Face-plate screws<br />
5 Face plate<br />
6 Tacker head<br />
7 Safety cover<br />
8 Magazine slider<br />
9 Thumbwheel for force selection<br />
10 Load opening<br />
11 Magazine<br />
Not all of the accessories illustrated or described are<br />
included as standard delivery.<br />
Intended Use<br />
The machine is intended for the tacking of cardboard,<br />
Insulating material, fabric, foils, leather<br />
and similar materials on surfaces of wood or materials<br />
similar to wood. It is also suitable for the attachment<br />
of wall and ceiling panelling.<br />
mikosoft praha s.r.o.<br />
8 • 1 609 929 894 • TMS • 26.09.03<br />
English - 1<br />
For Your Safety<br />
Working safely with this machine<br />
is possible only when the<br />
operating and safety information<br />
are read completely and the instructions<br />
contained therein are<br />
strictly followed. In addition, the<br />
general safety notes in the enclosed booklet<br />
must be observed.<br />
■ If the mains cable is damaged or cut through<br />
while working, do not touch the cable but immediately<br />
pull the mains plug. Never use the<br />
machine with a damaged cable.<br />
■ Connect machines that are used in the open<br />
via a residual current device (RCD) with an actuating<br />
current of 30 mA maximum. Do not operate<br />
the machine in rain or moisture.<br />
■ Always direct the cable to the rear away from<br />
the machine.<br />
■ Secure the workpiece. A workpiece clamped<br />
with clamping devices or in a vice is held more<br />
secure than by hand.<br />
■ Keep fingers away from the tacker head 6.<br />
■ Never point the machine at persons or animals.<br />
Staples or nails shot from a short distance<br />
can cause considerable injuries.<br />
■ Do not use the machine to fasten electrical wiring.<br />
■ For the fastening of ceiling coverings with<br />
wooden profiles or joint claws, only hardened<br />
staples with <strong>19</strong> mm length must be used.<br />
■ Never allow children to use the machine.<br />
■ Bosch is only able to ensure perfect operation<br />
of the machine if the original accessories intended<br />
for it are used.<br />
mikosoft praha s.r.o.<br />
mikosoft praha s.r.o.