DC940 DC945 DC935 DC920 DC925

ENGLISH
Drilling (fig. A)
● Select the drilling mode using the collar (4).
● Select forward rotation.
Drilling in metal
● Use a cutting lubricant when drilling metals.
The exceptions are cast iron and brass which
should be drilled dry.
Drilling in wood
● Use the appropriate type of drill bit.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D E WALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Lubrication
Your power tool requires no additional lubrication.
Separate collection of used products
and packaging allows materials to
be recycled and used again. Re-use
of recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
D E WALT provides a facility for the collection and
recycling of D E WALT products once they have
reached the end of their working life. To take
advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D E WALT offi ce at the address indicated in this
manual. Alternatively, a list of authorised D E WALT
repair agents and full details of our after-sales
service and contacts are available on the Internet
at: www.2helpU.com
Cleaning
● Unplug the charger before cleaning the housing
with a soft cloth.
● Remove the battery pack before cleaning your
power tool.
● Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
Protecting the environment
Separate collection. This product
must not be disposed of with normal
household waste.
Rechargeable battery pack
This long life battery pack must be recharged when
it fails to produce suffi cient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
● Run the battery pack down completely, then
remove it from the tool.
● NiCd and NiMH cells are recyclable. Take
them to your dealer or a local recycling station.
The collected battery packs will be recycled or
disposed of properly.
Should you fi nd one day that your D E WALT product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
32