NIBE SPS 10/SPS 20 - nibe.com
NIBE SPS 10/SPS 20 - nibe.com NIBE SPS 10/SPS 20 - nibe.com
GB 16 Troubleshooting Problem NOTE Any servicing or fault tracing must only be carried out by persons with the necessary expertise. System too noisy. Circulation pump too noisy. The circulation pump does not start. No pressure in the system. When draining the system no medium leaks from the filling and flushing unit. Possible cause Air in the system. Too high capacity in circulation pump. System pressure too low. Fault in the power supply. The pump is blocked by deposits in the bearings. Fault in the circulation pump. Fault in the safety valve. Leakage in the expansion vessel. Leakage in the system. Ball valves and/or shut-off is closed. Help Bleed the system. See page 15. Change to a lower speed. Increase the pressure or check the expansion vessel pre-pressure in an unpressurised system. Check the fuses and any loose cable connections. Run to maximum speed for a short period or Release the rotor, insert a screwdriver in the groove and turn by hand. Replace the circulation pump. Replace the whole safety valve or the insert. Replace the expansion vessel. Action. Turn the ball valve to position 45 °C and open the shut off:
Accessories LEK Spare parts Connection kit SCS 10 for expansion vessel Suitable for safety group, mounting for wall mounting, shaft pipe flat seal, flex pipe 500 mm, adapter, installation valve 3 / 4 ". Solar heat exchanger SHE 10 SHE 10 allows connection of solar heating systems to accumulator tanks without integrated solar coils. SHE 10 fits directly below SPS 20 and can exchange heat from 5 x Nibe FP 215 P solar panels. Flow meter With filling and draining valve, ball valve, compression ring coupling Ø 22 mm, length 127 mm. Ball valve for return line (blue) With integrated non-return valves and connection to safety group, thermometer in knob, display range 0 °C to 120 °C Ball valve for supply line (red) With integrated non-return valves, thermometer in knob, display range 0 °C to 120 °C Safety group Solar safety valve 0,6 MPa (6 bar), pressure gauge0/10 MPa (0/10 bar). Double action non-return valve To separate the expansion vessel from the system, 3 / 4 " internal thread x 3 / 4 " external thread. GB 17
- Page 1: 4 6 2 8 0 10 Solar SE GB DE DK FI N
- Page 4 and 5: SE 4 Installation Allmänt OBS! Rö
- Page 6 and 7: SE 6 Luftning av systemet 1 2 3 4 5
- Page 8 and 9: SE 8 Tillbehör LEK Reservdelar Ans
- Page 10 and 11: SE 10 Tekniska data Allmänt Vikt M
- Page 12 and 13: GB 12 English, NIBE SPS 10/SPS 20 G
- Page 14 and 15: GB 14 Safety valve and blowhole pip
- Page 18 and 19: GB 18 Technical data Dimensions 410
- Page 20 and 21: GB 20 Pump diagram
- Page 22 and 23: DE 22 Installation Allgemeines HINW
- Page 24 and 25: DE 24 System entlüften 1 2 3 4 5 6
- Page 26 and 27: DE 26 Zubehör LEK Ersatzteile Ansc
- Page 28 and 29: DE 28 Technische Daten Allgemeines
- Page 30 and 31: DK 30 Dansk, NIBE SPS 10/SPS 20 Gen
- Page 32 and 33: DK 32 Sikkerhedsventil og udluftnin
- Page 34 and 35: DK 34 Fejlsøgning Problem BEMÆRK
- Page 36 and 37: DK 36 Tekniske oplysninger Dimensio
- Page 38 and 39: DK 38 Pumpediagram
- Page 40 and 41: FI 40 Asennus Yleistä HUOM! Putkia
- Page 42 and 43: FI 42 Järjestelmän ilmaus 1 2 3 4
- Page 44 and 45: FI 44 Lisätarvikkeet LEK Varaosat
- Page 46 and 47: FI 46 Tekniset tiedot Yleistä Pain
- Page 48 and 49: FI 48
- Page 50: FI 50
Accessories<br />
LEK<br />
Spare parts<br />
Connection kit SCS <strong>10</strong> for expansion vessel<br />
Suitable for safety group, mounting for wall<br />
mounting, shaft pipe flat seal, flex pipe<br />
500 mm, adapter, installation valve 3 / 4 ".<br />
Solar heat exchanger SHE <strong>10</strong><br />
SHE <strong>10</strong> allows connection of solar heating<br />
systems to accumulator tanks without integrated<br />
solar coils.<br />
SHE <strong>10</strong> fits directly below <strong>SPS</strong> <strong>20</strong> and can exchange<br />
heat from 5 x Nibe FP 215 P solar panels.<br />
Flow meter<br />
With filling and draining valve, ball valve,<br />
<strong>com</strong>pression ring coupling Ø 22 mm, length<br />
127 mm.<br />
Ball valve for return line (blue)<br />
With integrated non-return valves and connection<br />
to safety group, thermometer in knob,<br />
display range 0 °C to 1<strong>20</strong> °C<br />
Ball valve for supply line (red)<br />
With integrated non-return valves, thermometer<br />
in knob, display range 0 °C to 1<strong>20</strong> °C<br />
Safety group<br />
Solar safety valve 0,6 MPa (6 bar), pressure<br />
gauge0/<strong>10</strong> MPa (0/<strong>10</strong> bar).<br />
Double action non-return valve<br />
To separate the expansion vessel from the system,<br />
3 / 4 " internal thread x 3 / 4 " external thread.<br />
GB<br />
17