FKS 2200 B1 - Lidl Service Website
FKS 2200 B1 - Lidl Service Website
FKS 2200 B1 - Lidl Service Website
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operation startup<br />
Always wear protective gloves<br />
when working with the chainsaw<br />
and employ only original parts.<br />
Pull out the power plug before<br />
doing any work on the chainsaw<br />
itself -– injury hazard!<br />
The tool is completely assembled on<br />
delivery.Before you start up the electric<br />
chainsaw, adjust the chain, fill up with<br />
chain oil and check the automatic lubrication<br />
and chain brake function.<br />
Tensioning the saw chain<br />
With a correctly tensioned chain you get<br />
good cutting performance and a longer<br />
life.<br />
An incorrectly tensioned chain<br />
may break or spring off, leading<br />
to danger of injury. Test the<br />
electric saw before every start<br />
and the chain tension after every<br />
hour of sawing.<br />
The chain is correctly tensioned if it does<br />
not sag at the rail underside and can be<br />
rotated completely around with the gloved<br />
hand.<br />
When the saw chain is tensioned with 9 N<br />
(approx. 1 kg), the gap between the saw<br />
chain and the guide rail may not be more<br />
than 2 mm.<br />
B<br />
GB IE<br />
1. Ensure that the chain brake has<br />
been released, that is, that the<br />
chain brake lever is pulled up<br />
against the front grip (8).<br />
2. Unscrew the fastening bolt (14).<br />
3. To tighten the saw, turn the chain<br />
adjustment ring (13) clockwise.<br />
To loosen the tension, turn the<br />
chain adjustment ring anti-clockwise.<br />
4. Tighten up the fastening bolt (14)<br />
again.<br />
With a new saw chain, you must<br />
readjust the chain tension after at<br />
least 5 cutting operations.<br />
Chain lubrication<br />
The rail and chain must never be<br />
without oil. If you operate the electric<br />
chainsaw with too little oil, the<br />
cutting performance and the lifetime<br />
of the saw chain is reduced,<br />
since the chain becomes blunt<br />
faster. You can identify a case of<br />
too little oil where smoke development<br />
or discoloration of the rail occurs.<br />
The power saw is equipped with an oil<br />
automatic system. As soon as the motor is<br />
speeded up, the oil also flows faster to the<br />
chain bar.<br />
• Check the oil fill level and regularly top<br />
up with oil ( C 21). The oil tank holds<br />
270 ml oil.<br />
• Use Parkside bio-oil; this product contains<br />
additives that reduce wear and<br />
tear and does not damage the pump<br />
system. bio-oil is available from our<br />
<strong>Service</strong>-Center (see P. 109 for the address).<br />
13
Change language