FKS 2200 B1 - Lidl Service Website

GB IE
General description
Function description
The chainsaw is driven by an electric motor.
The circulating chain is led around a
saw bar (guide rail)
The tool is fitted with a rapid-action chaintensioning
system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various
protection fittings for the protection of the
user.
Refer to the following descriptions for the
function of control elements.
Overview
A
12
The diagrams can be found on
the front old-out pages.
1 Rear handle
2 Oil filler cap
3 Chain brake handle, front hand
guard
4 Chain bar
5 Saw chain
6 Nose sprocket
7 Bumper
8 Front handle
9 Electric motor
10 On/off switch
11 Safety lock
12 Chain catcher
13 Chain adjustment ring
14 Fastening bolt for sprocket chain
wheel covering
15 Safety bolt
16 Sprocket chain wheel covering
17 Rear hand guard
18 Cable holder
19 Mains cable
20 Saw bar protection sheath
Safety functions
A
1 Rear grip with hand guard (17)
Protects the hand against
branches and boughs in the
case of springing away by the
chain.
3 Chain braking lever/hand
guard
Control system, which stops the
saw chain immediately in case
of a spring-back; lever can also
be activated manually; protects
the left hand of the operator if it
slides from the front grip.
5 Saw chain with small springback
Helps you to catch spring-backs
with specially developed control
systems.
7 Metal stop claw
Reinforces the stability when
vertical cuts are carried out and
facilitates sawing.
9 Electric motor
Double insulated for safety reasons.
10 On-off switch with safety
chain brake
On releasing the On/Off switch,
the device immediately switches
off.
11 Switch-on block
The switch-on block must be
released for switching on the device.
12 Chain catcher
Decreases the danger of injuries
if the chain breaks or if it comes
off.