KMR 1700 D - Kärcher

Operating Instructions KMR 1700 D English
Take out dirty filter
Insert the new filter
Place bonnet on air filter housing
Note:
Ensure right position of bonnet!
(Labelling)
Note:
You must hear the bonnet latch click
Reset the indicator light
Press the key at bottom of
indicator light
Close engine cover
Testing and adjusting
fanbelt
In the middle between the
crankshaft and the alternator, given
a pressure of 10 Kg the V-belt must
give approx. 7 - 9 mm
— V-belt tension is set by adjusting
alternator.
Cleaning and replacing fuel
filter system
Danger!
Explosion hazard
— Do not carry out maintenance
tasks in closed rooms
Shut-off the engine
— Smoking and naked flames
prohibited
Close the fuel feed line
Release the ring screw and take
off the fuel filter including
contents
Clean or replace the fuel filter
Replace the gasket ring
Clean the fuel filter casing
Unscrew the fuel filter
43