KMR 1700 D - Kärcher

Operating Instructions KMR 1700 D English
Replace the dust filter
Danger!
Empty the debris container prior
to start of dust filter replacement
Wear a dust protection mask
when working on the filter system
Observe the safety precautions
for handling fine dust
Open dust filter cover with unit
key
Start engine
Raise the swept material
container to the end position
Shut-off the engine
Lock the hand brake
Pull out pin of locking rod
Remove locking rod
Insert locking rod
Unscrew screws at bracket to
required extent so that the
bracket can be turned and pulled
out
Pull out bracket as far as
possible
Take out finned filter
Insert the new filter
Engage it on the drive end
Engage carriers in the holes
Slide in bracket and fasten it with
screws
Remove locking rod
Insert locking rod
Insert pin of locking rod
Start engine
Run-in the swept material
container to the end position
Shut-off the engine
Lock the dust filter cover with the
unit key
41