DW754.PM5 14-03-2001, 15:22 1 - Service

ENGLISH
17 Do not abuse cord
Never pull the cord to disconnect from the
socket. Keep the cord away from heat, oil and
sharp edges.
18 Store idle tools
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
19 Maintain tools with care
Keep the tools in good condition and clean for
better and safer performance. Follow the
instructions for maintenance and changing
accessories. Keep all handles and switches dry,
clean and free from oil and grease.
20 Repairs
This tool is in accordance with the relevant safety
regulations. Have your tool repaired by an
authorised DEWALT repair agent. Repairs should
only be carried out by qualified persons using
original spare parts; otherwise this may result in
considerable danger to the user.
Additional safety rules for grinding and honing
machines
• Use only grinding and honing wheels carrying a
label stating the manufacturer, the type of bonding
material, the dimensions and the maximum speed
of the wheel, and complying with EN 12413.
• Do not use grinding and honing wheels with a
maximum speed lower than the speed of the
machine (see technical data).
• Do not use grinding and honing wheels that do
not conform to the dimensions stated in the
technical data. Do not use any spacers to make
a wheel fit onto the spindle.
• Replace a grinding or honing wheel as soon as it
has worn by more than ca. 40 mm.
• Always strictly follow the instructions when
replacing a grinding or honing wheel.
• Before fitting a new grinding or honing wheel,
it must be checked for cracks by suspending it on
a thin cord and striking it gently with a hammer.
The wheel should produce a clear sound. If not,
the weel is damaged and must not be used.
• Regularly check a grinding or honing wheel for
alignment. If the wheel is running out of centre or
out of balance, it must be replaced.
• Always store grinding and honing wheels in a dry
place.
• Only use the machine at ambient temperatures
from 5 °C to 40 °C.
• Switch on the machine and let the wheel run with
no load for at least 30 seconds before use.
• Always wear safety goggles when grinding dry.
• Never grind magnesium tools.
• Warning! Use of this machine can generate dust
containing chemicals known to cause cancer,
birth defects or other reproductive harm. Use
appropriate respiratory protection.
Do not use the machine in the vicinity of
any highly inflammable materials.
Residual risks
The following risks are inherent to the use of these
machines:
- injuries caused by touching the rotating parts
- injuries caused by disruption of the grinding wheel
These risks are most evident:
- within the range of operation
- within the range of the rotating machine parts
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
- Impairment of hearing.
- Risk of accidents caused by the uncovered parts
of the rotating wheel or belt.
- Risk of injury when changing the wheel or belt.
- Risk of squeezing fingers when opening the guards.
Package contents
The package contains:
1 Grinding wheel
1 Honing wheel
1 Clamping and grinding attachment
1 Plastic bag containing:
2 spark guards
1 spanner
1 set of mounting material
1 Electrical scheme
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
en - 3 16
DW754.PM5 24
14-03-2001, 15:23