Basic Thermostat
Basic Thermostat
Basic Thermostat
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
New offset = T menu 1 - T surface<br />
Example: Use the floor sensor temperature value from menu<br />
1. If this value is 27°C and the floor surface thermometer<br />
shows 24°C, the new offset value will be 27-24 = 3.<br />
Change the offset from 4°C to 3°C.<br />
Push confirmation button several times (scroll through<br />
Menu structure) for leaving the Calibration mode to Normal<br />
mode<br />
6. Reset to factory settings.<br />
T menu1<br />
T surface<br />
set value floor sensor mode < > 23°C<br />
set value room sensor mode < > 20°C<br />
floor sensor offset value < > 4°C<br />
Reset: switch "off" the thermostat < >. Press < > and<br />
< > simultanously with switching "on" < > the<br />
thermostat "000" is displayed. Press < > and “CLR” is<br />
displayed. The thermostat is reset.<br />
15