Basic Thermostat
Basic Thermostat
Basic Thermostat
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
is connected, it operates in floor sensor mode. If the floor<br />
sensor cable is not connected, it operates in room sensor<br />
mode.<br />
After 5 sec. the thermostat checks if an external control<br />
signal is connected.<br />
If yes, the thermostat will be controlling according to the<br />
set temperature and external signal. The symbol AUTO is<br />
activated. If no, the thermostat will be controlling according<br />
to the set temperature.<br />
Adjust the set temperature, desired floor temperature or<br />
room temperature, with the < > buttons. This is an<br />
approximate set value to get a comfort temperature on the<br />
floor or in the room.<br />
Heating-on symbol < > indicates on the display when the<br />
heating cable is on.<br />
4.2. Optional function<br />
4.2.1 Activating Heat booster < ><br />
This function is used for temporary increase of the floor/<br />
room temperature by 5°C.<br />
Push the confirmation button < > in 3 sec. The current<br />
set temperature will increase by 5°C for 2 hours and this<br />
increased temperature is shown on the display. Automatic<br />
reverts to the set temperature after 2 hours or if the<br />
confirmation button is pushed again in 3 sec. within the<br />
2 hour period.<br />
If external control is connected: Push the confirmation<br />
button < > in 3 sec. The thermostat will now be in<br />
Manual mode. Push again the confirmation button < ><br />
in 3 sec. The thermostat will go in “booster” mode and<br />
the current set temperature will increase by 5°C for 2<br />
hours. This increased temperature is shown on the display.<br />
Automatic reverts to the set temperature after 2 hours or<br />
if the confirmation button< > is pushed again in 3 sec.<br />
within the 2 hour period.<br />
11