Basic Thermostat
Basic Thermostat
Basic Thermostat
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Display symbols<br />
10<br />
Set value for floor- or room temperature<br />
or error code<br />
Heating cable on<br />
Error<br />
Locked settings<br />
Calibration mode<br />
Menu number<br />
Manual mode<br />
Auto mode<br />
Heat booster active<br />
Floor- or Room sensor mode<br />
(in room sensing mode < > is not shown)<br />
Note: the square moves over the different symbols when<br />
programming. The symbol in the square indicates the active<br />
function: manual mode, automatic mode by external signal,<br />
booster function.<br />
First start – set the thermostat in operation :<br />
Push in the main < > power switch, located on the upper<br />
part of the thermostat.<br />
The display illuminates and shows all segments. Then it<br />
shows the setting temperature and sensor mode. The sensor<br />
mode is initialised automatically. If the floor sensor cable