Auping AVS Spiraalbodem

3.4 Fitting the Auping mattress*
• Put your bed in the horizontal position.
• Make sure that the five protruding clipon
pins of the mattress connectors
are pushed widthways into the mesh
(see fig. 2).
• ‘Click’ the mattress connectors into
the mesh at the positions indicated
(see fig. 2).
• Make sure that the mattress
connectors are not directly above a
cross bar.
• Put the mattress on the mesh base
and centre it.
fig. 2
3.5 Preparing for use
• Check that the mesh base can move
freely. Only adjust the mesh base
while it is in a horizontal position,
securely fixed to the supporting legs,
or to the supports provided within the
bed surround.
• Check that the mattress is attached to
the mesh base properly.
3.6 Tips for use
A new mattress has a certain amount of
rigidity, which will disappear within a
few days. Consequently, your mattress
will not optimally follow the contours of
the mesh base when it is initially
adjusted. We therefore recom mend
that you lie down on the mattress while
adjusting the positions for the first time.
We therefore recommend that you lie
down on the mattress while adjusting
the positions for the first time.
* If applicable.
EN
_0DV5G_5934 BW.pdf - pag.17 LET OP !!! Lage resolutie!
February 6, 2012
7