VALVE HEAD W25 TYPE B, PTFE GENERAL FEATURES ... - Keofitt

VALVE HEAD W25 TYPE B, PTFE ART. NO. 875547
GENERAL
The KEOFITT CLASSIC W25 Sampling Valve is the largest KEOFITT sampling valve. Designed for very high viscosity
sampling it is the highest capacity sterilizable-in-place sampling valve in the market.
The sampling valve can be used for any process sampling for microbiological, chemical and/or physical analysis.
The valve can be sterilized by means of SIP (EHEDG test) and cleaned by means of CIP (EHEDG certified). Not
recommended for autoclave due to plastic parts.
The product to be sampled should have a maximum viscosity of 0-250.000 cP and should not contain particles larger
than 17 mm diameter.
FEATURES
Installation: Clamped connection
Inlet / Outlet: Depending on choice of valve body
Operation: Turn knob - no spring (open left)
Membrane: PTFE (TFM 1600 - white)
CERTIFICATION*
· Conforms to 3-A · EHEDG CIP · EU 1935/2004
TECHNICAL DATA
Material (product contact)
· Membrane PTFE (TFM 1600 - white)
Material (without product contact)
· Steel parts
· Steel parts
· Knob
· Clamp ring
Membrane
· Article
· Certification*
Pressure & Temperature
Net Weight
Spareparts
· Pressure
· Temperature
· Air supply
AISI 303L (1.4305)
AISI 316L (1.4404)
HDPE (black)
AISI 304 (1.4301)
PTFE, WHITE (# 870055)
FDA · USP · EU 1935/2004
0 - 6 bar (g) / 0 - 87 psi (g)
1 - 150°C / 34 - 302° F
-
· Kg/lbs 1,878 kg /4,14 lbs
778747 PARTS FOR W25 HEAD 875547
242,1 mm
90,0 mm
*For further information please visit keofitt.dk
Last updated 11-03-2013