AutoCAD P&ID 2011 Getting Started - Autodesk
AutoCAD P&ID 2011 Getting Started - Autodesk AutoCAD P&ID 2011 Getting Started - Autodesk
© 2010 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. The data from DIN Standards are used by permission of DIN Deutsches Institut fr Normung e. V. They conform with the current version of the DIN Standards concerned (December 1, 2007, Autodesk) The JIS symbols in this product are used by Autodesk under permission from JIS. ISA Symbols © ISA © Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin ISO 10628:1997 Symbols © The International Organization for Standardization (ISO) ISO 14617-5:2002 Symbols © The International Organization for Standardization (ISO) ISO 14617-6:2002 Symbols © The International Organization for Standardization (ISO) ISO 3511-1:1977 Symbols © The International Organization for Standardization (ISO) ISO 3511-2:1984 Symbols © The International Organization for Standardization (ISO) ISO 3511-3:1984 Symbols © The International Organization for Standardization (ISO) DIN 2481:1979-06 Symbols © Deutsches Institut fr Normung e. V. (DIN) JIS Z 8204:1983 Symbols © Japanese Industrial Standard (JIS) Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, Freewheel, GDX Driver, Green Building Studio, Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Inventor, Inventor LT, Kaydara, Kaydara (design/logo), Kynapse, Kynogon, LandXplorer, Lustre, MatchMover, Maya, Mechanical Desktop, Moldflow, Moonbox, MotionBuilder, Movimento, MPA, MPA (design/logo), Moldflow Plastics Advisers, MPI, Moldflow Plastics Insight, MPX, MPX (design/logo), Moldflow Plastics Xpert, Mudbox, Multi-Master Editing, Navisworks, ObjectARX, ObjectDBX, Open Reality, Opticore, Opticore Opus, Pipeplus, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, RasterDWG, RealDWG, Real-time Roto, Recognize, Render Queue, Retimer,Reveal, Revit, Showcase, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo), Sparks, SteeringWheels, Stitcher, Stone, StudioTools, ToolClip, Topobase, Toxik, TrustedDWG, ViewCube, Visual, Visual LISP, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI (design/logo). All other brand names, product names or trademarks belong to their respective holders. Disclaimer THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS. Published by: Autodesk, Inc. 111 Mclnnis Parkway San Rafael, CA 94903, US
. . . . . . . . . . . . 1 AutoCAD P&ID 2011. . . . . . . . . . . . 2 P&ID. . . . . . . . . . 2 P&ID . . . 14 . 17 . . . . . . . . . . . . . . . . 19 " " . . . . 25 . . . . . . . . . . . . . 27 . . . . . . . . . . . 29 . . . . . . 33 . . . . . . . . . . . . . . . . 35 . . . . . . . . . . . . 36 . . . . . . . . . . . . . . 36 . . . . . . . . . . . 38 DWF DWFx P&ID . . . . . . 38
- Page 1: ® AutoCAD P&ID 2011 2010
- Page 5 and 6: Добро пожаловать в
- Page 7 and 8: | 3 В экране "И снова
- Page 9 and 10: | 5 Диалоговое окно "
- Page 11 and 12: | 7 Для помещения ин
- Page 13 and 14: | 9 Итоговый отчет В
- Page 15 and 16: | 11 Ручки P&ID В важне
- Page 17 and 18: | 13 Контекстные мен
- Page 19 and 20: | 15 Использование д
- Page 21 and 22: Для создания и орга
- Page 23 and 24: | 19 Для выполнения
- Page 25 and 26: | 21 4 В Мастере настр
- Page 27 and 28: 6 Нажмите "Готово".
- Page 29 and 30: | 25 " " Теперь, ког
- Page 31 and 32: | 27 Свойства черте
- Page 33 and 34: | 29 Теперь, когда с
- Page 35 and 36: | 31 4 Разверните узе
- Page 37 and 38: При работе в среде
- Page 39 and 40: | 35 Если текущим ра
- Page 41 and 42: | 37 3 На панели Журна
- Page 43 and 44: | 39 Публикация файл
- Page 45 and 46: | 41 После публикаци
- Page 47 and 48: P&ID Можно легко созд
- Page 49 and 50: P&ID | 45 Для создания
- Page 51 and 52: P&ID | 47 Добавление ре
© 2010 <strong>Autodesk</strong>, Inc. All rights reserved.<br />
Except as otherwise permitted by <strong>Autodesk</strong>, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method,<br />
for any purpose.<br />
Certain materials included in this publication are reprinted with the permission of the copyright holder.<br />
The data from DIN Standards are used by permission of DIN Deutsches Institut fr Normung e. V. They conform with the current version<br />
of the DIN Standards concerned (December 1, 2007, <strong>Autodesk</strong>)<br />
The JIS symbols in this product are used by <strong>Autodesk</strong> under permission from JIS.<br />
ISA Symbols © ISA<br />
© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin<br />
ISO 10628:1997 Symbols © The International Organization for Standardization (ISO)<br />
ISO 14617-5:2002 Symbols © The International Organization for Standardization (ISO)<br />
ISO 14617-6:2002 Symbols © The International Organization for Standardization (ISO)<br />
ISO 3511-1:1977 Symbols © The International Organization for Standardization (ISO)<br />
ISO 3511-2:1984 Symbols © The International Organization for Standardization (ISO)<br />
ISO 3511-3:1984 Symbols © The International Organization for Standardization (ISO)<br />
DIN 2481:1979-06 Symbols © Deutsches Institut fr Normung e. V. (DIN)<br />
JIS Z 8204:1983 Symbols © Japanese Industrial Standard (JIS)<br />
Trademarks<br />
The following are registered trademarks or trademarks of <strong>Autodesk</strong>, Inc., and/or its subsidiaries and/or affiliates in the USA and other<br />
countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio,<br />
Alias|Wavefront (design/logo), ATC, AUGI, <strong>AutoCAD</strong>, <strong>AutoCAD</strong> Learning Assistance, <strong>AutoCAD</strong> LT, <strong>AutoCAD</strong> Simulator, <strong>AutoCAD</strong> SQL<br />
Extension, <strong>AutoCAD</strong> SQL Interface, <strong>Autodesk</strong>, <strong>Autodesk</strong> Envision, <strong>Autodesk</strong> Intent, <strong>Autodesk</strong> Inventor, <strong>Autodesk</strong> Map, <strong>Autodesk</strong><br />
MapGuide, <strong>Autodesk</strong> Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner, Backdraft, Built with ObjectARX (logo),<br />
Burn, Buzzsaw, CAiCE, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification,<br />
Constructware, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf,<br />
DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG<br />
TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop,<br />
Freewheel, GDX Driver, Green Building Studio, Heads-up Design, Heidi, HumanIK, <strong>ID</strong>EA Server, i-drop, ImageModeler, iMOUT,<br />
Incinerator, Inferno, Inventor, Inventor LT, Kaydara, Kaydara (design/logo), Kynapse, Kynogon, LandXplorer, Lustre, MatchMover,<br />
Maya, Mechanical Desktop, Moldflow, Moonbox, MotionBuilder, Movimento, MPA, MPA (design/logo), Moldflow Plastics Advisers, MPI,<br />
Moldflow Plastics Insight, MPX, MPX (design/logo), Moldflow Plastics Xpert, Mudbox, Multi-Master Editing, Navisworks, ObjectARX,<br />
ObjectDBX, Open Reality, Opticore, Opticore Opus, Pipeplus, PolarSnap, PortfolioWall, Powered with <strong>Autodesk</strong> Technology,<br />
Productstream, ProjectPoint, ProMaterials, RasterDWG, RealDWG, Real-time Roto, Recognize, Render Queue, Retimer,Reveal,<br />
Revit, Showcase, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo), Sparks, SteeringWheels, Stitcher,<br />
Stone, StudioTools, ToolClip, Topobase, Toxik, TrustedDWG, ViewCube, Visual, Visual LISP, Volo, Vtour, Wire, Wiretap,<br />
WiretapCentral, XSI, and XSI (design/logo).<br />
All other brand names, product names or trademarks belong to their respective holders.<br />
Disclaimer<br />
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS."<br />
AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY<br />
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE<br />
MATERIALS.<br />
Published by:<br />
<strong>Autodesk</strong>, Inc.<br />
111 Mclnnis Parkway<br />
San Rafael, CA 94903, US