GUIDE TCI LED DRIVERS 2016-17
MP 32 HV K2 Direct current electronic drivers with DIP-SWITCH Alimentatori elettronici in corrente continua con DIP-SWITCH Made in Europe professional led applications 05 (4) SAA-141280-EA SELV 2.1 RIPPLE FREE Multipower LED drivers Alimentatori LED multipotenza Rated Voltage Tensione Nominale 110 ÷ 127 V (2) 220 ÷ 240 V Frequency Frequenza 50...60 Hz AC Operation range Tensione di utilizzo AC 100 ÷ 264 V DC Operation range Tensione di utilizzo DC 170 ÷ 280 V Power Potenza 0 ÷ 32 W Maximum current output ripple Max. ondulazione della corrente uscita ≤ 3% (1) Reference Norms Norme di riferimento: EN 50172 (VDE 0108) EN 55015 EN 61000-3-2 EN 61000-3-3 EN 61347-1 EN 61347-2-13 EN 61547 VDE 0710-T14 Article Articolo MP 32 HV K2 MP 32 HV BI MP 32 HV K2 Code Codice 122202 122456 P out W V out DC Features • Multipower driver supplied with dip-switch for the selection of the output current. • IP20 independent driver, for indoor use (MP 32 HV K2). • Class II protection against electric shock for direct or indirect contact (MP 32 HV K2). • Driver for built-in use (MP 32 HV BI). • It can be used for lighting equipment in protection class I and II (MP 32 HV BI). • Active Power Factor Corrector. • Current regulation ±5 % including temperature variations. • Supplied with terminal cover and cable retainer. • Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm 2 / AWG15). • Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (MP 32 HV K2). • Driver can be secured with slot for screws. • Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads. • Thermal protection = C.5.a. I out DC n° LED max. (1) V out max. ta °C tc °C l max. h max. Power Efficiency (1) Factor Constant current output - Uscita in corrente costante -25...+45 (3) /50 75 0,98 > 88 19 (15 (2) ) 54 max. 350 mA cost. 16/18 59 22 (15 (2) ) 54 max. 400 mA cost. 16/18 24 (15 (2) ) 54 max. 450 mA cost. 16/18 27 (15 (2) ) 54 max. 500 mA cost. 16/18 30 (3) (15 (2) ) 54 max. 550 mA cost. 16/18 32 (3) (15 (2) ) 53 max. 600 mA cost. 15/16 32 (3) (15 (2) ) 49 max. 650 mA cost. 14/15 32 (3) (15 (2) ) 46 max. 700 mA cost. 12/13 Constant voltage output - Uscita in tensione costante 17 (15 (2) ) 24 cost. 1050 mA max. - - (1) Referred to V in = 230 V, 100% load - Riferito a V in = 230 V, carico 100% (4) Only for MP 32 HV K2 MP 32 HV BI Caratteristiche • Alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita. • Alimentatore indipendente IP20, per uso interno (MP 32 HV K2). • Protetto in classe II contro le scosse elettriche per contatti diretti e indiretti (MP 32 HV K2). • Alimentatore da incorporare (MP 32 HV BI). • Utilizzabile per apparecchi di illuminazione in classe di protezione I e II (MP 32 HV BI). • PFC attivo. • Corrente regolata ±5 % incluse variazioni di temperatura. • Fornito di coprimorsetto e serracavo. • Morsetti di entrata e uscita sullo stesso lato (sezione cavo fino a 1,5 mm 2 / AWG15). • Serracavo su primario e secondario per cavi di diametro: min. 3 mm - max. 8 mm (MP 32 HV K2). • Fissaggio dell’alimentatore tramite asole per viti. • Protezioni: - termica e cortocircuito; - contro le extra-tensioni di rete; - contro i sovraccarichi. • Protezione termica = C.5.a. 34 www.tci.it TCI professional LED applications
MP 32 HV K2 Direct current electronic drivers with DIP-SWITCH Alimentatori elettronici in corrente continua con DIP-SWITCH Made in Europe professional led applications Compatible with ZHAGA (AS1) 93,5 3,68’’ Ø72 2,83’’ Weight - Peso gr. 120 / 4,20 oz. Pcs - Pezzi 50 Compatible with ZHAGA (AS1) 93,5 3,68’’ Weight - Peso gr. 100 / 3,50 oz. Pcs - Pezzi 50 57,5 2,26’’ 67 2,63’’ 57,5 2,26’’ 67 2,63’’ 2.1 103 4,06’’ 21 0,83’’ Wiring diagram - Schema di collegamento (Max. LED distance on page info8 - Massima distanza LED a pagina info8) 90 3,54’’ 21 0,83’’ Multipower LED drivers Alimentatori LED multipotenza DIP-SWITCH SEC + _ LED PRI N L Vin TCI professional LED applications www.tci.it 35
- Page 18 and 19: Index in order of CODE Indice in or
- Page 20 and 21: Index in order of ARTICLE Indice in
- Page 22 and 23: Index in order of ARTICLE Indice in
- Page 24 and 25: Index in order of ARTICLE Indice in
- Page 26 and 27: Power LED Power LED professional le
- Page 28 and 29: LED choice table Tabella di scelta
- Page 30 and 31: LED choice table Tabella di scelta
- Page 32 and 33: LED choice table Tabella di scelta
- Page 34 and 35: LED choice table Tabella di scelta
- Page 36 and 37: professional led applications Made
- Page 38 and 39: BULL/U professional led application
- Page 40 and 41: STC HC professional led application
- Page 42 and 43: 1. STF/U Direct current electronic
- Page 44 and 45: DCC/U S professional led applicatio
- Page 46 and 47: DC AR professional led applications
- Page 48 and 49: 1. MWU Direct current electronic dr
- Page 50 and 51: W HPF professional led applications
- Page 52 and 53: KU2 professional led applications 1
- Page 54 and 55: DC MICRO Z professional led applica
- Page 56 and 57: Multipower LED drivers Alimentatori
- Page 58 and 59: UNIVERSALE 20 Direct current electr
- Page 60 and 61: UNIVERSALE 20 LC Direct current ele
- Page 62 and 63: UNIVERSALE 20 HC Direct current ele
- Page 64 and 65: UNIVERSALE 20 WR Direct current ele
- Page 66 and 67: MP 32 K2 Direct current electronic
- Page 70 and 71: MP 39 K2 Direct current electronic
- Page 72 and 73: WIDESQUARE 30/350-700 Direct curren
- Page 74 and 75: SMARTx 26 PLUS Direct current elect
- Page 76 and 77: SMART 32 Direct current electronic
- Page 78 and 79: SMART 42 Direct current electronic
- Page 80 and 81: PROFESSIONALE 34 Direct current ele
- Page 82 and 83: PROFESSIONALE 42 Direct current ele
- Page 84 and 85: SMART 50 Direct current electronic
- Page 86 and 87: MP 50 K3 Direct current electronic
- Page 88 and 89: MP 50 SV K3 - SELV 60 V Direct curr
- Page 90 and 91: MP 50 TCM Direct current electronic
- Page 92 and 93: MP 54 BI Direct current electronic
- Page 94 and 95: MP 55 HC Direct current electronic
- Page 96 and 97: MP 55 / 120 HC Direct current elect
- Page 98 and 99: MP 65 H Direct current electronic d
- Page 100 and 101: MP 65 HTCM Direct current electroni
- Page 102 and 103: SMART 70 Direct current electronic
- Page 104 and 105: SUPERSLIM Direct current electronic
- Page 106 and 107: ATON 30/250-700 Direct current elec
- Page 108 and 109: ATON 30/700-1400 Direct current ele
- Page 110 and 111: MP 32 SLIM Direct current electroni
- Page 112 and 113: MP 60 SLIM Direct current electroni
- Page 114 and 115: SMART 70 HC SLIM Direct current ele
- Page 116 and 117: MP 50/350 SLIM Direct current elect
MP 32 HV K2<br />
Direct current electronic drivers with DIP-SWITCH<br />
Alimentatori elettronici in corrente continua con DIP-SWITCH<br />
Made in Europe<br />
professional led applications<br />
Compatible with ZHAGA (AS1)<br />
93,5<br />
3,68’’<br />
Ø72<br />
2,83’’<br />
Weight - Peso gr. 120 / 4,20 oz.<br />
Pcs - Pezzi 50<br />
Compatible with ZHAGA (AS1)<br />
93,5<br />
3,68’’<br />
Weight - Peso gr. 100 / 3,50 oz.<br />
Pcs - Pezzi 50<br />
57,5<br />
2,26’’<br />
67<br />
2,63’’<br />
57,5<br />
2,26’’<br />
67<br />
2,63’’<br />
2.1<br />
103<br />
4,06’’<br />
21<br />
0,83’’<br />
Wiring diagram - Schema di collegamento (Max. <strong>LED</strong> distance on page info8 - Massima distanza <strong>LED</strong> a pagina info8)<br />
90<br />
3,54’’<br />
21<br />
0,83’’<br />
Multipower <strong>LED</strong> drivers<br />
Alimentatori <strong>LED</strong> multipotenza<br />
DIP-SWITCH<br />
SEC<br />
+ _<br />
<strong>LED</strong><br />
PRI<br />
N<br />
L<br />
Vin<br />
<strong>TCI</strong> professional <strong>LED</strong> applications www.tci.it<br />
35
Change language