GUIDE TCI LED DRIVERS 2016-17

Recommendations

Info

Technical information - Informazioni tecniche To improve the electromagnetic compatibility Per migliorare la compatibilità elettromagnetica professional led applications To improve the electromagnetic compatibility we suggest the following actions: MAINS CABLES: • The minimum distance should be longer than 10 cm from lamp cables. • The mains cable must not be parallel to the control gear and to the LED modules (high frequency coupling). • Keep the mains cable as short as possible. CONTROL GEARS: • The earth connection must be present when in the label there is the symbol. • The earth connection with symbol is optional and required only when the EMC limits are not complied in the final application. • The earth connection can be performed to the terminal block or the fixing screw in the case of control gears with metallic spring. • The earth connection for through-wiring must be performed with 1,5 mm 2 cross section connections (paragraph 5.3.1.1 of EN 60598-1) and verified by the continuity test (paragraph 5.3.1.1 of EN 60598-1). • The control gears are protected against the high voltage transients according to EN 61547; nevertheless some failures can happen during the electric strength test of the luminaire in production by the application of a 1500 V a.c. (or 1,41 x 1500 V d.c.). We suggest to perform the insulation test, alternative method of annex Q of EN 60598-1, by applyng 500 V d.c. for 1 second and measuring the insulation resistance. OUTPUT CABLES: • The lenght and section of the cables need to be suitable for the final application (see table page info8). • Check the accordance of the final application with the reference norms. Per migliorare la compatibilità elettromagnetica si consigliano le seguenti azioni: CAVI DI RETE: • Mantenere una distanza minima di 10 cm dai cavi di lampada. • Possibilmente i cavi di rete non devono essere paralleli all’alimentatore e ai moduli LED (accoppiamento in alta frequenza). • Mantenere il cavo di rete più corto possibile. ALIMENTATORE ELETTRONICO: • La connessione di terra è necessaria in presenza del simbolo . • La connessione di terra in presenza del simbolo è opzionale e richiesta solamente quando i limiti EMC non sono rispettati nell’applicazione finale. • La connessione di terra può essere effettuata o sul morsetto o sulla vite di fissaggio nel caso di alimentatori forniti con molla metallica. • Per il cablaggio passante, la connessione di terra deve avvenire attraverso una sezione minima di 1,5 mm 2 (paragrafo 5.3.1.1 della EN 60598-1) e verificata con la prova di continuità (paragrafo 7.2.3 della EN 60598-1). • Gli alimentatori elettronici sono protetti da transienti dell’alta tensione secondo EN 61547; tuttavia alcuni guasti possono essere causati durante il test di rigidità nel collaudo di produzione dell’apparecchio se si applica una tensione di 1500 V a.c. (oppure 1,41 x 1500 V d.c.). Consigliamo di eseguire il test d’isolamento, metodo alternativo della EN 60598-1 appendice Q, utilizzando una tensione di 500 V d.c. per 1 secondo e misurando la resistenza d’isolamento. CAVI DI USCITA: • Utilizzare cavi di lunghezza e sezione adeguati all’impiego (come indicato nella tabella a pagina info8). • Verificare che nell’applicazione finale siano rispettatte tutte le normative di riferimento. Technical information Informazioni tecniche info16 www.tci.it TCI professional LED applications
Technical information - Informazioni tecniche Inrush current Corrente di spunto professional led applications Conversion table for max. quantities of ballasts on other types of Miniature Circuit Breaker Tabella di conversione per max. quantità di reattori ad altri tipi di interruttore automatico MCB type Relative number of ballasts Numero relativo di alimentatori B 25A 156 % B 20A 125 % B 16A 100 % B 10A 63 % C 25A 260 % C 20A 208 % C 16A 170 % C 10A 104 % Driver Alimentatore DC BULL / STC / STM / STMP / STCP DC MICROZ / DC MR UNTERPUTZDOSE DC MICROJOLLY / DC MOONLIGHT STF DCC / DCC H / BMU / SLIM U MWU / AR/ KU2 / WU / WUS RPWM / T-TU SP / MP15 RV LED / DC EFU/ EFUR R 57 / RD 57 WU RGB / DCC IP54 / ELDN T / ELED XX UNIVERSALE 20 XX MP 32 XX / MP 32 HV XX / MP 39 XX SMART 26/32/42/50/54/70 PROFESSIONALE 34 / PROFESSIONALE 42 ATON XX WOLF MP / MP 32 SLIM DC MINIJOLLY XX DC JOLLY / DC JOLLY HV DC JOLLY US / DC JOLLY HC DC JOLLY DALI / JOLLY DIN DC JOLLY SLIM XX SUPERSLIM XX / SUPERFLAT XX DC JOLLY MD / VST DMX / JOLLY COMBO Max. quantity of ballasts per miniature circuit breaker type B 16 A Max. quantità di reattori per tipo interruttori automatici modulari B 16 A Inrush current ½ value time at typical mains impedance Corrente di spunto ½ tempo valore tipico impedenza di rete 50 20A 170 μS 27 27A 250μS 50 5A 50μS WIDESQUARE / WIDESLIM 30 10A 40μS MP 50 XX / MP 60 SLIM XX MAXI JOLLY DALI DIN DC MAXI JOLLY US XX DC MAXI JOLLY HV XX DC MAXI JOLLY SLIM XX 15 20A 400μS DC LS 110 5A 120μS MP 55 XX / MP 65 H XX / MP 54 NR DC MAXIJOLLY HC XX DC MAXIJOLLY H XX MAXI JOLLY CR DC 50W/70W VST XX / ST2 DC 60W 24V SLIM DC 150W VST / ST2 DC 120W 24V VSTR SIRIO 100 XX / SIRIO 150/XX POLARIS 150/XX 30 10A 200μS 15 15A 600μS 8 35A 1000μS MP 50 SLIM / MP 80/XXX SLIM T-LED 80/XX SLIM (MAXIJOLLY 80 SLIM HV) T-LED 90/XX SLIM MULTIJOLLY 4CH 30 45A 100μS W HPF / MINI MD / MICRO MD 50 2A 50μS MW 70 LED / W 105 LED / UT 105 LED - 14A 5μS Technical information Informazioni tecniche TCI professional LED applications www.tci.it info17
Page 1:
profEssionai iEd apptications LED d
Page 4 and 5:
1. LED DRIVERS OVERVIEW - 2016-2017
Page 6 and 7:
Summary Sommario professional led a
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Index in order of CODE Indice in or
Page 18 and 19:
Index in order of CODE Indice in or
Page 20 and 21:
Index in order of ARTICLE Indice in
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Power LED Power LED professional le
Page 28 and 29:
LED choice table Tabella di scelta
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
professional led applications Made
Page 38 and 39:
BULL/U professional led application
Page 40 and 41:
STC HC professional led application
Page 42 and 43:
1. STF/U Direct current electronic
Page 44 and 45:
DCC/U S professional led applicatio
Page 46 and 47:
DC AR professional led applications
Page 48 and 49:
1. MWU Direct current electronic dr
Page 50 and 51:
W HPF professional led applications
Page 52 and 53:
KU2 professional led applications 1
Page 54 and 55:
DC MICRO Z professional led applica
Page 56 and 57:
Multipower LED drivers Alimentatori
Page 58 and 59:
UNIVERSALE 20 Direct current electr
Page 60 and 61:
UNIVERSALE 20 LC Direct current ele
Page 62 and 63:
UNIVERSALE 20 HC Direct current ele
Page 64 and 65:
UNIVERSALE 20 WR Direct current ele
Page 66 and 67:
MP 32 K2 Direct current electronic
Page 68 and 69:
MP 32 HV K2 Direct current electron
Page 70 and 71:
Page 72 and 73:
WIDESQUARE 30/350-700 Direct curren
Page 74 and 75:
SMARTx 26 PLUS Direct current elect
Page 76 and 77:
SMART 32 Direct current electronic
Page 78 and 79:
Page 80 and 81:
PROFESSIONALE 34 Direct current ele
Page 82 and 83:
PROFESSIONALE 42 Direct current ele
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
MP 50 SV K3 - SELV 60 V Direct curr
Page 90 and 91:
MP 50 TCM Direct current electronic
Page 92 and 93:
MP 54 BI Direct current electronic
Page 94 and 95:
MP 55 HC Direct current electronic
Page 96 and 97:
MP 55 / 120 HC Direct current elect
Page 98 and 99:
MP 65 H Direct current electronic d
Page 100 and 101:
MP 65 HTCM Direct current electroni
Page 102 and 103:
Page 104 and 105:
SUPERSLIM Direct current electronic
Page 106 and 107:
ATON 30/250-700 Direct current elec
Page 108 and 109:
ATON 30/700-1400 Direct current ele
Page 110 and 111:
MP 32 SLIM Direct current electroni
Page 112 and 113:
MP 60 SLIM Direct current electroni
Page 114 and 115:
SMART 70 HC SLIM Direct current ele
Page 116 and 117:
MP 50/350 SLIM Direct current elect
Page 118 and 119:
MP 80/500 SLIM Direct current elect
Page 120 and 121:
MP 80/500 SLIM LS - LEDset2 Direct
Page 122 and 123:
Page 124 and 125:
MICRO JOLLY 6 - 1...10 V & PUSH Dir
Page 126 and 127:
MOONLIGHT 6 Direct current dimmable
Page 128 and 129:
RD57 - 1...10 V & PUSH Direct curre
Page 130 and 131:
MICRO MD professional led applicati
Page 132 and 133:
MINIJOLLY 20 - 1...10 V & PUSH Dire
Page 134 and 135:
MINIJOLLY DALI 20 professional led
Page 136 and 137:
MINIJOLLY LC 20 - 1...10 V & PUSH D
Page 138 and 139:
MINIJOLLY LC DALI 20 Direct current
Page 140 and 141:
MINIJOLLY HV Direct current dimmabl
Page 142 and 143:
MINIJOLED - 1...10 V & PUSH Direct
Page 144 and 145:
MINI MD Direct current dimmable (TR
Page 146 and 147:
JOLLY 25 - 1...10 V & PUSH Direct c
Page 148 and 149:
JOLLY HV 25 - 1...10 V & PUSH Direc
Page 150 and 151:
JOLLY PLUS - 1...10 V & PUSH Direct
Page 152 and 153:
JOLLY HV PLUS - 1...10 V & PUSH Dir
Page 154 and 155:
JOLLY US 32 - 1...10 V & PUSH Direc
Page 156 and 157:
JOLLY DALI 32 Direct current dimmab
Page 158 and 159:
JOLLY HC 39 - 1...10 V & PUSH Direc
Page 160 and 161:
PROFESSIONALE DALI 32 Direct curren
Page 162 and 163:
JOLLY MD 32 Direct current dimmable
Page 164 and 165:
WIDESQUARE R - 1...10 V & PUSH Dire
Page 166 and 167:
JOLLY DIN 32 Direct current dimmabl
Page 168 and 169:
MAXI JOLLY SV DALI 40 Direct curren
Page 170 and 171:
MAXI JOLLY US 50 - 1...10 V & PUSH
Page 172 and 173:
MAXI JOLLY US DALI 50 Direct curren
Page 174 and 175:
MAXI JOLLY SV - SELV 60 V - 1...10
Page 176 and 177:
MAXI JOLLY SV DALI - SELV 60 V Dire
Page 178 and 179:
MAXI JOLLY HV 50 - 1...10 V & PUSH
Page 180 and 181:
MAXI JOLLY HV DALI 50 Direct curren
Page 182 and 183:
MAXI JOLLY US TCM 50 - 1...10 V & P
Page 184 and 185:
MAXI JOLLY US DALI TCM 50 Direct cu
Page 186 and 187:
MAXI JOLLY HC 55 - 1...10 V & PUSH
Page 188 and 189:
MAXI JOLLY HC DALI 55 Direct curren
Page 190 and 191:
MAXI JOLLY HC TCM 55 - 1...10 V & P
Page 192 and 193:
MAXI JOLLY HC DALI TCM 55 Direct cu
Page 194 and 195:
MAXI JOLLY H 65 Direct current dimm
Page 196 and 197:
MAXI JOLLY DALI H 65 Direct current
Page 198 and 199:
MAXI JOLLY HTCM 65 Direct current d
Page 200 and 201:
MAXI JOLLY DALI HTCM 65 Direct curr
Page 202 and 203:
MAXI JOLLY DALI CR 50 Direct curren
Page 204 and 205:
DMX VST Direct current dimmable ele
Page 206 and 207:
RV LED professional led application
Page 208 and 209:
SUPERSLIM 1...10 V Direct current d
Page 210 and 211:
SUPERSLIM DALI Direct current dimma
Page 212 and 213:
SUPERFLAT DALI Direct current dimma
Page 214 and 215:
ATON 30/250-700 DALI Direct current
Page 216 and 217:
JOLLY SLIM 32 - 1...10 V & PUSH Dir
Page 218 and 219:
JOLLY SLIM HV 32 - 1...10 V & PUSH
Page 220 and 221:
MAXI JOLLY SLIM 60 - 1...10 V & PUS
Page 222 and 223:
MAXI JOLLY SLIM DALI 60 Direct curr
Page 224 and 225:
MAXI JOLLY SLIM HV 60 - 1...10 V &
Page 226 and 227:
MAXI JOLLY SLIM HV DALI 60 Direct c
Page 228 and 229:
MAXI JOLLY SLIM DALI 60 LS - LEDset
Page 230 and 231:
T-LED 80/350 1...10V SLIM Direct cu
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
T-LED 80/350 DALI SLIM Direct curre
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
T-LED 80/500 DALI SLIM LS - LEDset2
Page 246 and 247:
Page 248 and 249:
SIRIO 150/200-700 Direct current di
Page 250 and 251:
SIRIO 150/300-1050 Direct current d
Page 252 and 253:
SIRIO 150/700 ST2 professional led
Page 254 and 255:
SIRIO 100 - 1...10 V & BILEVEL Dire
Page 256 and 257:
SIRIO 120/600-2100 - 1...10 V & BIL
Page 258 and 259:
SIRIO 150/200-700 - 1...10 V & BILE
Page 260 and 261:
SIRIO 150/300-1050 - 1...10 V & BIL
Page 262 and 263:
MAXI JOLLY US FP - FULL PROGRAMMABL
Page 264 and 265:
SIRIO 100/200-700 FP - FULL PROGRAM
Page 266 and 267:
SIRIO 150/200-700 FP - FULL PROGRAM
Page 268 and 269:
SIRIO 150/300-1050 FP - FULL PROGRA
Page 270 and 271:
POLARIS 150/200-700 FP - FULL PROGR
Page 272 and 273:
POLARIS 150/300-1050 FP - FULL PROG
Page 274 and 275:
DALI PROGRAMMER USB-DALI signal con
Page 276 and 277:
JOLLY AND MAXI JOLLY WITH CONFORMAL
Page 278 and 279:
244 www.tci.it TCI professional LED
Page 280 and 281:
MIDNIGHT SERIES SERIE MIDNIGHT Made
Page 282 and 283:
MAXI JOLLY US MIDNIGHT Direct curre
Page 284 and 285:
BILEVEL SERIES SERIE BILEVEL Made i
Page 286 and 287:
JOLLY US BILEVEL Direct current dim
Page 288 and 289:
MAXI JOLLY US BILEVEL Direct curren
Page 290 and 291:
MAXI JOLLY HC BILEVEL BI profession
Page 292 and 293:
PLV SERIES (PUSH LOW VOLTAGE LED DR
Page 294 and 295:
MINIJOLLY HV PLV Direct current dim
Page 296 and 297:
MINIJOLLY LC PLV Direct current dim
Page 298 and 299:
JOLLY SLIM PLV Direct current dimma
Page 300 and 301:
MAXI JOLLY HC PLV BI professional l
Page 302 and 303:
CONSTANT VOLTAGE LED DRIVERS ALIMEN
Page 304 and 305:
UNTERPUTZDOSE professional led appl
Page 306 and 307:
EFU Direct current electronic drive
Page 308 and 309:
WU RGB IR & PUSH professional led a
Page 310 and 311:
VST BI Direct current electronic dr
Page 312 and 313:
VST professional led applications D
Page 314 and 315:
VST II professional led application
Page 316 and 317:
VSTR RGB - 1...10 V / PUSH / IR pro
Page 318 and 319:
DC 60W 24V DALI SLIM Direct current
Page 320 and 321:
DC 60W 24V SLIM Direct current elec
Page 322 and 323:
Page 324 and 325:
DCC/U S IP54 IP54 direct current el
Page 326 and 327:
STCP/U IP54 IP54 resin-bonded direc
Page 328 and 329:
SLIM/U IP65 professional led applic
Page 330 and 331:
ST2 IP67 professional led applicati
Page 332 and 333:
Page 334 and 335:
LV HR Direct current electronic dri
Page 336 and 337:
LV RGB 250 / 350 / 500 Direct curre
Page 338 and 339:
LV RGB IR Direct current electronic
Page 340 and 341:
Page 342 and 343:
COMBO LED Dimmable electronic drive
Page 344 and 345:
ELDN T Emergency light KIT for powe
Page 346 and 347:
ELED HP Emergency light KIT for pow
Page 348 and 349:
BATTERY KIT Battery KIT for ELDN T
Page 350 and 351:
ELBT Emergency light KIT for 12 Vdc
Page 352 and 353:
ELHT Emergency light KIT for 230 Vd
Page 354 and 355: professional led applications Made
Page 356 and 357: MW 70 LED DIMMABLE Dimmable (TRAILI
Page 358 and 359: W 105 LED PWM Dimmable 12 V electro
Page 360 and 361: ACCESSORIES ACCESSORI Made in Europ
Page 362 and 363: DALI INTERFACE professional led app
Page 364 and 365: DMX INTERFACE professional led appl
Page 366 and 367: SED 4.5A R57 Low voltage dimmer for
Page 368 and 369: RVLN Low voltage mini-body detector
Page 370 and 371: T-CAP professional led applications
Page 372 and 373: Synchronism - Sincronismo Examples
Page 374 and 375: CONTROL AND REGULATION SYSTEMS SIST
Page 376 and 377: MINI RADIO REMOTE CONTROL Radio rem
Page 378 and 379: EASY EASY radio transmitter Trasmet
Page 380 and 381: RADIO RECEIVER 1...10 V Control sys
Page 382 and 383: ETD2E9 Universal pushbutton dimmer
Page 384 and 385: SCU-EVG - CONVERTER PUSH/1...10 V P
Page 386 and 387: DALI POWER POTI DALI power potentio
Page 388 and 389: TOUCH PANEL DMX professional led ap
Page 390 and 391: Technical information - Informazion
Page 396 and 397: q Technical information - Informazi
Page 406: Warranty - Garanzia professional le
show all

GUIDE TCI LED DRIVERS 2016-17

Create successful ePaper yourself

Delete template?

Save as template?