GUIDE TCI LED DRIVERS 2016-17
ELED HP Emergency light KIT for power LED and LED modules KIT per luce d’emergenza per power LED e moduli LED Made in Europe professional led applications PENDING 05 PENDING SELV ELED HP ELED HP BI Emergency LED drivers Alimentatori LED per illuminazione d’emergenza 8. Voltage Tensione 220 - 240 V Frequency Frequenza 50...60 Hz Potenza Power 3 - 7 W Supply current Corrente di alimentazione: 20 mA Operating time Autonomia: 1-3 h Charge time Tempo di ricarica: 24 h ta °C: 0...+55 tc °C: 75 Reference Norms Norme di riferimento: EN 55015 EN 60598-2-22 EN 61000-3-2 EN 61347-2-13 EN 61347-2-7 EN 61547 Code Codice Code Codice ELED HP (1h) ELED HP BI (1h) ELED HP/3 (3h) ELED HP/3 BI (3h) • Class II protection against electric shock for direct or indirect contact (ELED HP). • It can be used for lighting equipment in protection class I and II (ELED HP BI). • Instant emergency operation at mains failure. • Maintained or not maintained operation (maintained operation suitable with electronic drivers or dimmable electronic drivers). • Multi-power dimmable version DIP-SWITCH, constant current or constant voltage to power LED to LED modules. • “High temperature” Ni-Cd / Ni-MH batteries. • Charge indicator with LED. • ”Rest mode” facility with remote control device. • Keep the battery not connected to the kit until the final installation of the system (luminaire installation). • Do not stock battery and kit connected together. Technical data • Length battery cable: 280 mm / 11’’. • Length LED cable: 350 mm / 13,8’’. • LED mounting hole: Ø 9 mm / 0,35’’. • Supply current: 20 mA max. • Terminal blocks max. connection size: 1,5 mm 2 / AWG15. • Max distance between driver and lamp: 2 mt / 6 ft. signal LED Ni-MH BATTERY Battery case 7,2 V - 2 Ah 7,2 V - 4 Ah 2x 3,6 V - 4 Ah BOX BOX compact-compatti compact-compatti linear-lineare 1h 3h 123025 P P P 123025K P P P P 123025/3 P P P 123025/3K P P P P 123026 P P P 123026/3 P P P Code Codice ELED HP (1h) ELED HP BI (1h) ELED HP/3 (3h) ELED HP (1h) ELED HP/3 BI (3h) Only emergency driver - Solo driver emergenza ELED HP BI (1h) ELED HP/3 (3h) ELED HP/3 BI (3h) signal LED 123023NB P P 123023/3NB P P 123024NB P P 123024/3NB P P signal LED Ni-Cd BATTERY Battery case 7,2 V - 1,6 Ah 7,2 V - 4 Ah 2x 3,6 V - 4 Ah BOX BOX compact-compatti compact-compatti linear-lineare 1h 3h 123023 P P P 123023K P P P P 123023/3 P P P 123023/3K P P P P 123024 P P P 123024/3 P P P • Protetto in classe II contro le scosse elettriche per contatti diretti e indiretti (ELED HP). • Utilizzabile per apparecchi di illuminazione in classe di protezione I e II (ELED HP BI). • Intervento istantaneo ad ogni mancanza di rete. • Funzionamento in sola emergenza o in luce continua (luce continua in abbinamento con alimentatori elettronici e alimentatori elettronici dimmerabili). • Regolazione con DIP-SWITCH, per power LED a corrente costante o per moduli LED a tensione costante. • Batterie tipo Ni-Cd / Ni-MH “alta temperatura“. • Indicatore di ricarica a LED. • Possibilità d’inibizione in “modo riposo” con telecomando esterno centralizzato. • Mantenere la batteria non connessa al KIT fino all’installazione finale del sistema (installazione della lampada). • Non immagazzinare collegati tra loro batteria e KIT. Dati tecnici • Lunghezza cavo batteria: 280 mm / 11’’. • Lunghezza cavo LED: 350 mm / 13,8’’. • Foro di montaggio LED: Ø 9 mm / 0,35’’. • Corrente di alimentazione: 20 mA max. • Portata morsettiera: 1,5 mm 2 / AWG15. • Distanza massima dall’alimentatore dalla lampada: 2 m / 6 ft. 312 www.tci.it TCI professional LED applications
ELED HP Emergency light KIT for power LED and LED modules KIT per luce d’emergenza per power LED e moduli LED Made in Europe professional led applications Ø56 2,20’’ Weight - Peso: gr. 185 / 6,52 oz. Pcs - Pezzi 1 Weight - Peso gr. 215 / 7,5 oz. Pcs - Pezzi 70 33,5 1,32’’ 46 1,81’’ 33,5 1,32’’ 46 1,81’’ 149,60 6,6’’ 166,5 5,9’’ 149,60 6,6’’ 139,5 5,5’’ 25 0,98’’ 25 0,98’’ 158 6,2’’ Wiring diagrams - Schemi di collegamento (max. LED distance: 2 mt / 6 ft - Distanza max. LED: 2 mt / 6 ft). L CHARGE N mA 450 LED indicator Non-maintained (emergency only) diagram Collegamento non permanente (solo emergenza) + _ TELECOMANDO INIBIZIONE REST MODE ELDN T ELDN T " 1 2 + _ + _ + _ _ + NO J J LED/LOAD + _ Rest mode 4÷12 Vdc Battery L CHARGE N L 1 N 1 LED indicator L + in out _ N DRIVER Maintained with external electronic driver diagram Collegamento permanente (illuminazione ordinaria) " 1 2 + _ + _ + _ _ + NO J J LED/LOAD + Rest mode _ 4÷12 Vdc Remote control device diagrams Collegamento con telecomando esterno centralizzato Remote control device It allows both to switch off the emergency lamps during emergency mode. The rest mode is automatically resetted when mains voltage is restored. This remote control device can be installed so as to operate several emergency units at the same time. Con telecomando esterno centralizzato Permette lo spegnimento delle lampade durante il funzionamento in emergenza. Al rientro della tensione di rete il sistema si predisporrà ad un nuovo intervento in emergenza. Battery Emergency LED drivers Alimentatori LED per illuminazione d’emergenza 8. 400 350 300 250 200 150 100 50 0 Vf LED 0,0 10,0 20,0 30,0 40,0 50,0 60,0 70,0 DIP-SWITCH Working voltage during emergency (V L ) Tensione di lavoro in emergenza (V L ) Output current during emergency (I) Corrente in uscita in emergenza (I) n° LED max. Power max. for LED modules Potenza max. per moduli LED A 9...12 V 350 ± 10% 3/4 24 W B 9...24 V 350...250mA 7/8 30 W C 9...46 V 350...125mA 12/14 - D 9...58 V 350...100mA 17/18 - TCI professional LED applications www.tci.it 313
- Page 296 and 297: MINIJOLLY LC PLV Direct current dim
- Page 298 and 299: JOLLY SLIM PLV Direct current dimma
- Page 300 and 301: MAXI JOLLY HC PLV BI professional l
- Page 302 and 303: CONSTANT VOLTAGE LED DRIVERS ALIMEN
- Page 304 and 305: UNTERPUTZDOSE professional led appl
- Page 306 and 307: EFU Direct current electronic drive
- Page 308 and 309: WU RGB IR & PUSH professional led a
- Page 310 and 311: VST BI Direct current electronic dr
- Page 312 and 313: VST professional led applications D
- Page 314 and 315: VST II professional led application
- Page 316 and 317: VSTR RGB - 1...10 V / PUSH / IR pro
- Page 318 and 319: DC 60W 24V DALI SLIM Direct current
- Page 320 and 321: DC 60W 24V SLIM Direct current elec
- Page 322 and 323: professional led applications Made
- Page 324 and 325: DCC/U S IP54 IP54 direct current el
- Page 326 and 327: STCP/U IP54 IP54 resin-bonded direc
- Page 328 and 329: SLIM/U IP65 professional led applic
- Page 330 and 331: ST2 IP67 professional led applicati
- Page 332 and 333: professional led applications Made
- Page 334 and 335: LV HR Direct current electronic dri
- Page 336 and 337: LV RGB 250 / 350 / 500 Direct curre
- Page 338 and 339: LV RGB IR Direct current electronic
- Page 340 and 341: professional led applications Made
- Page 342 and 343: COMBO LED Dimmable electronic drive
- Page 344 and 345: ELDN T Emergency light KIT for powe
- Page 348 and 349: BATTERY KIT Battery KIT for ELDN T
- Page 350 and 351: ELBT Emergency light KIT for 12 Vdc
- Page 352 and 353: ELHT Emergency light KIT for 230 Vd
- Page 354 and 355: professional led applications Made
- Page 356 and 357: MW 70 LED DIMMABLE Dimmable (TRAILI
- Page 358 and 359: W 105 LED PWM Dimmable 12 V electro
- Page 360 and 361: ACCESSORIES ACCESSORI Made in Europ
- Page 362 and 363: DALI INTERFACE professional led app
- Page 364 and 365: DMX INTERFACE professional led appl
- Page 366 and 367: SED 4.5A R57 Low voltage dimmer for
- Page 368 and 369: RVLN Low voltage mini-body detector
- Page 370 and 371: T-CAP professional led applications
- Page 372 and 373: Synchronism - Sincronismo Examples
- Page 374 and 375: CONTROL AND REGULATION SYSTEMS SIST
- Page 376 and 377: MINI RADIO REMOTE CONTROL Radio rem
- Page 378 and 379: EASY EASY radio transmitter Trasmet
- Page 380 and 381: RADIO RECEIVER 1...10 V Control sys
- Page 382 and 383: ETD2E9 Universal pushbutton dimmer
- Page 384 and 385: SCU-EVG - CONVERTER PUSH/1...10 V P
- Page 386 and 387: DALI POWER POTI DALI power potentio
- Page 388 and 389: TOUCH PANEL DMX professional led ap
- Page 390 and 391: Technical information - Informazion
- Page 392 and 393: Technical information - Informazion
- Page 394 and 395: Technical information - Informazion
E<strong>LED</strong> HP<br />
Emergency light KIT for power <strong>LED</strong> and <strong>LED</strong> modules<br />
KIT per luce d’emergenza per power <strong>LED</strong> e moduli <strong>LED</strong><br />
Made in Europe<br />
professional led applications<br />
PENDING<br />
05<br />
PENDING<br />
SELV<br />
E<strong>LED</strong> HP<br />
E<strong>LED</strong> HP BI<br />
Emergency <strong>LED</strong> drivers<br />
Alimentatori <strong>LED</strong> per illuminazione d’emergenza<br />
8.<br />
Voltage<br />
Tensione<br />
220 - 240 V<br />
Frequency<br />
Frequenza<br />
50...60 Hz<br />
Potenza<br />
Power<br />
3 - 7 W<br />
Supply current<br />
Corrente di<br />
alimentazione:<br />
20 mA<br />
Operating time<br />
Autonomia:<br />
1-3 h<br />
Charge time<br />
Tempo di ricarica:<br />
24 h<br />
ta °C: 0...+55<br />
tc °C: 75<br />
Reference Norms<br />
Norme di riferimento:<br />
EN 55015<br />
EN 60598-2-22<br />
EN 61000-3-2<br />
EN 61347-2-13<br />
EN 61347-2-7<br />
EN 61547<br />
Code<br />
Codice<br />
Code<br />
Codice<br />
E<strong>LED</strong> HP<br />
(1h)<br />
E<strong>LED</strong> HP BI<br />
(1h)<br />
E<strong>LED</strong> HP/3<br />
(3h)<br />
E<strong>LED</strong> HP/3 BI<br />
(3h)<br />
• Class II protection against electric shock for direct or indirect<br />
contact (E<strong>LED</strong> HP).<br />
• It can be used for lighting equipment in protection class I and II<br />
(E<strong>LED</strong> HP BI).<br />
• Instant emergency operation at mains failure.<br />
• Maintained or not maintained operation (maintained operation<br />
suitable with electronic drivers or dimmable electronic drivers).<br />
• Multi-power dimmable version DIP-SWITCH, constant current or<br />
constant voltage to power <strong>LED</strong> to <strong>LED</strong> modules.<br />
• “High temperature” Ni-Cd / Ni-MH batteries.<br />
• Charge indicator with <strong>LED</strong>.<br />
• ”Rest mode” facility with remote control device.<br />
• Keep the battery not connected to the kit until the final<br />
installation of the system (luminaire installation).<br />
• Do not stock battery and kit connected together.<br />
Technical data<br />
• Length battery cable: 280 mm / 11’’.<br />
• Length <strong>LED</strong> cable: 350 mm / 13,8’’.<br />
• <strong>LED</strong> mounting hole: Ø 9 mm / 0,35’’.<br />
• Supply current: 20 mA max.<br />
• Terminal blocks max. connection size: 1,5 mm 2 / AWG15.<br />
• Max distance between driver and lamp: 2 mt / 6 ft.<br />
signal<br />
<strong>LED</strong><br />
Ni-MH BATTERY<br />
Battery case<br />
7,2 V - 2 Ah 7,2 V - 4 Ah 2x 3,6 V - 4 Ah BOX BOX<br />
compact-compatti compact-compatti linear-lineare 1h 3h<br />
123025 P P P<br />
123025K P P P P<br />
123025/3 P P P<br />
123025/3K P P P P<br />
123026 P P P<br />
123026/3 P P P<br />
Code<br />
Codice<br />
E<strong>LED</strong> HP<br />
(1h)<br />
E<strong>LED</strong> HP BI<br />
(1h)<br />
E<strong>LED</strong> HP/3<br />
(3h)<br />
E<strong>LED</strong> HP<br />
(1h)<br />
E<strong>LED</strong> HP/3 BI<br />
(3h)<br />
Only emergency driver - Solo driver emergenza<br />
E<strong>LED</strong> HP BI<br />
(1h)<br />
E<strong>LED</strong> HP/3<br />
(3h)<br />
E<strong>LED</strong> HP/3 BI<br />
(3h)<br />
signal <strong>LED</strong><br />
123023NB P P<br />
123023/3NB P P<br />
123024NB P P<br />
123024/3NB P P<br />
signal<br />
<strong>LED</strong><br />
Ni-Cd BATTERY<br />
Battery case<br />
7,2 V - 1,6 Ah 7,2 V - 4 Ah 2x 3,6 V - 4 Ah BOX BOX<br />
compact-compatti compact-compatti linear-lineare 1h 3h<br />
123023 P P P<br />
123023K P P P P<br />
123023/3 P P P<br />
123023/3K P P P P<br />
123024 P P P<br />
123024/3 P P P<br />
• Protetto in classe II contro le scosse elettriche per contatti diretti<br />
e indiretti (E<strong>LED</strong> HP).<br />
• Utilizzabile per apparecchi di illuminazione in classe di<br />
protezione I e II (E<strong>LED</strong> HP BI).<br />
• Intervento istantaneo ad ogni mancanza di rete.<br />
• Funzionamento in sola emergenza o in luce continua (luce<br />
continua in abbinamento con alimentatori elettronici e<br />
alimentatori elettronici dimmerabili).<br />
• Regolazione con DIP-SWITCH, per power <strong>LED</strong> a corrente<br />
costante o per moduli <strong>LED</strong> a tensione costante.<br />
• Batterie tipo Ni-Cd / Ni-MH “alta temperatura“.<br />
• Indicatore di ricarica a <strong>LED</strong>.<br />
• Possibilità d’inibizione in “modo riposo” con telecomando<br />
esterno centralizzato.<br />
• Mantenere la batteria non connessa al KIT fino all’installazione<br />
finale del sistema (installazione della lampada).<br />
• Non immagazzinare collegati tra loro batteria e KIT.<br />
Dati tecnici<br />
• Lunghezza cavo batteria: 280 mm / 11’’.<br />
• Lunghezza cavo <strong>LED</strong>: 350 mm / 13,8’’.<br />
• Foro di montaggio <strong>LED</strong>: Ø 9 mm / 0,35’’.<br />
• Corrente di alimentazione: 20 mA max.<br />
• Portata morsettiera: 1,5 mm 2 / AWG15.<br />
• Distanza massima dall’alimentatore dalla lampada: 2 m / 6 ft.<br />
312 www.tci.it<br />
<strong>TCI</strong> professional <strong>LED</strong> applications