GUIDE TCI LED DRIVERS 2016-17
JOLLY SLIM PLV Direct current dimmable electronic drivers with DIP-SWITCH Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH Made in Europe professional led applications 05 SELV RIPPLE FREE Accessories not supplied - Accessori non a corredo Article - Articolo L (length) Code - Codice Synchronization cable Cavetto di sincronizzazione 1,5 m / 4 ft 485720512 4 m / 13 ft 485720513 50 cm / 19,68’’ 485720515 20 cm / 7,87’’ 485720516 4.4 Street lighting and energy saving LED drivers Alimentatori LED per illuminazione stradale e a risparmio energetico Rated Voltage Tensione Nominale 110 ÷ 120 V (2) 220 ÷ 240 V Frequency Frequenza 50...60 Hz AC Operation range Tensione di utilizzo AC 99 ÷ 264 V DC Operation range Tensione di utilizzo DC 176 ÷ 264 V Power Potenza 0 ÷ 32 W Maximum current output ripple Max. ondulazione della corrente uscita ≤ 3% (1) Reference Norms Norme di riferimento: EN 50172 (VDE 0108) EN 55015 EN 61000-3-2 EN 61000-3-3 EN 61347-1 EN 61347-2-13 EN 61547 EN 62384 VDE 0710-T14 Article Articolo Code Codice P out W V out DC I out DC n° LED max. (1) V out max. ta °C tc °C l max. h max. Power Efficiency (1) Factor DC JOLLY SLIM PLV 122681 Constant current output - Uscita in corrente costante -25...+50 80 0,96 > 87 17 (15 (2) ) 47 max. 350 mA cost. 12 53 24 (15 (2) ) 47 max. 500 mA cost. 12 32 (15 (2) ) 47 max. 700 mA cost. 12 Constant voltage output - Uscita in tensione costante 20 (15 (2) ) 24 cost. 900 mA max. - - (1) Referred to V in = 230 V, 100% load - Riferito a V in = 230 V, carico 100% Weight - Peso gr. 110 / 3,88 oz. Pcs - Pezzi 50 220 8,66’’ 237 9,33’’ 30 1,18’’ 21 0,83’’ Wiring diagram - Schema di collegamento (Max. LED distance at page info8 - Massima distanza LED a pagina info8) V in L PRI N L N SYNC SYNC max. 10 alimentatori in serie max. 10 drivers in looping connection V in PRI SYNC + _ + _ DIP SWITCH + _ DIP SWITCH + + SYNC _ _ + _ + _ LED LED PUSH LV Features • Multipower driver supplied with dip-switch for the selection of the output current. • Driver for built-in use. • It can be used for lighting equipment in protection class I. • Active Power Factor Corrector. • Current regulation ±5 % including temperature variations. • Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads. Caratteristiche • Alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita. • Alimentatore da incorporare. • Utilizzabile per apparecchi di illuminazione in classe di protezione I. • PFC attivo. • Corrente regolata ±5 % incluse variazioni di temperatura. • Protezioni: - termica e cortocircuito; - contro le extra-tensioni di rete; - contro i sovraccarichi. 264 www.tci.it TCI professional LED applications
MAXI JOLLY US PLV Direct current dimmable electronic drivers with DIP-SWITCH Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH Made in Europe professional led applications DAMP LOCATION (2) 05 SAA-141682-EA SELV RIPPLE FREE Accessories not supplied - Accessori non a corredo Article - Articolo L (length) Code - Codice Synchronization cable Cavetto di sincronizzazione 1,5 m / 4 ft 485720512 4 m / 13 ft 485720513 50 cm / 19,68’’ 485720515 20 cm / 7,87’’ 485720516 Rated Voltage Tensione Nominale 110 ÷ 127 V (2) 220 ÷ 240 V Frequency Frequenza 50...60 Hz AC Operation range Tensione di utilizzo AC 99 ÷ 264 V DC Operation range Tensione di utilizzo DC DC 170 ÷ 280 V Power Potenza 0 ÷ 50 W Maximum current output ripple Max. ondulazione della corrente uscita ≤ 3% (1) Reference Norms Norme di riferimento: CSA-C22.2 n° 107.1 (2) CSA-C22.2 n° 250.13 (2) EN 50172 (VDE 0108) EN 55015 EN 61000-3-2 EN 61000-3-3 EN 61347-1 EN 61347-2-13 EN 61547 EN 62384 UL 1012 (2) UL 8750 (2) Article Articolo Code Codice P out W V out DC (1) Referred to V in = 230 V, 100% load - Riferito a V in = 230 V, carico 100% Wiring diagram - Schema di collegamento (Max. LED distance at page info8 - Massima distanza LED a pagina info8) Features • IP20 independent driver, for indoor use. • Class II protection against electric shock for direct or indirect contact. • Active Power Factor Corrector. • Analogical input for thermal sensor connection. • Auxiliary output 12 V max. 100 mA. • Current regulation ±5 % including temperature variations. • Input and output terminal blocks on the same side (wire cross-section up to 2,5 mm 2 / AWG13). • Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm. • Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads. I out DC n° LED max. (1) V out max. ta °C tc °C l max. h max. Power Efficiency (1) Factor DC MAXI JOLLY US PLV 122419 25 (25 (2) ) 74 V max. 350 mA cost 20 90 -25...+50 85 0,95 > 90 35 (35 (2) ) 72 V max. 500 mA cost. 20 39 (39 (2) ) 72 V max. 550 mA cost. 20 46 (40 (2) ) 72 V max. 650 mA cost. 18/20 50 (40 (2) ) 71 V max. 700 mA cost. 18 50 (40 (2) ) 66 V max. 750 mA cost. 16/18 50 (40 (2) ) 58 V max. 850 mA cost. 16/18 -25...+45 50 (40 (2) ) 55 V max. 900 mA cost. 16 50 (40 (2) ) 48 V max. 1,05 A cost. 14 48Vout voltage limit settable with Dip-Switch - Poutmax=50W Compatible with ZHAGA (AM3) 111 4,37’’ 124 4,88’’ Ø84 3,31’’ 67 2,64’’ 22 0,87’’ 79 3,11’’ Weight - Peso: gr. 150 / 5,3 oz. Pcs - Pezzi 50 JOLLY MAXI JOLLY Series 6 5 4 3 2 1 Max. 10 drivers in looping connection Max. 10 alimentatori in serie 6 5 4 3 2 1 SYNC SEC _ + SYNC PRI SEC _ + PRI LED PUSH Caratteristiche • Alimentatore indipendente IP20, per uso interno. • Protetto in classe II contro le scosse elettriche per contatti diretti e indiretti. • PFC attivo. • Entrata analogica per connessione sensore termico. • Uscita ausiliare 12 V max. 100 mA. • Corrente regolata ±5 % incluse variazioni di temperatura. • Morsetti di entrata e uscita sullo stesso lato (sezione cavo fino a 2,5 mm 2 / AWG13). • Serracavo su primario e secondario per cavi di diametro: min. 3 mm - max. 8 mm. • Protezioni: - termica e cortocircuito; - contro le extra-tensioni di rete; - contro i sovraccarichi. _ + _ + N L _ + + N L V aux _ V aux LED 12 V AUX Vin THERMAL SENSOR 12 V AUX Vin 4.4 Street lighting and energy saving LED drivers Alimentatori LED per illuminazione stradale e a risparmio energetico TCI professional LED applications www.tci.it 265
- Page 248 and 249: SIRIO 150/200-700 Direct current di
- Page 250 and 251: SIRIO 150/300-1050 Direct current d
- Page 252 and 253: SIRIO 150/700 ST2 professional led
- Page 254 and 255: SIRIO 100 - 1...10 V & BILEVEL Dire
- Page 256 and 257: SIRIO 120/600-2100 - 1...10 V & BIL
- Page 258 and 259: SIRIO 150/200-700 - 1...10 V & BILE
- Page 260 and 261: SIRIO 150/300-1050 - 1...10 V & BIL
- Page 262 and 263: MAXI JOLLY US FP - FULL PROGRAMMABL
- Page 264 and 265: SIRIO 100/200-700 FP - FULL PROGRAM
- Page 266 and 267: SIRIO 150/200-700 FP - FULL PROGRAM
- Page 268 and 269: SIRIO 150/300-1050 FP - FULL PROGRA
- Page 270 and 271: POLARIS 150/200-700 FP - FULL PROGR
- Page 272 and 273: POLARIS 150/300-1050 FP - FULL PROG
- Page 274 and 275: DALI PROGRAMMER USB-DALI signal con
- Page 276 and 277: JOLLY AND MAXI JOLLY WITH CONFORMAL
- Page 278 and 279: 244 www.tci.it TCI professional LED
- Page 280 and 281: MIDNIGHT SERIES SERIE MIDNIGHT Made
- Page 282 and 283: MAXI JOLLY US MIDNIGHT Direct curre
- Page 284 and 285: BILEVEL SERIES SERIE BILEVEL Made i
- Page 286 and 287: JOLLY US BILEVEL Direct current dim
- Page 288 and 289: MAXI JOLLY US BILEVEL Direct curren
- Page 290 and 291: MAXI JOLLY HC BILEVEL BI profession
- Page 292 and 293: PLV SERIES (PUSH LOW VOLTAGE LED DR
- Page 294 and 295: MINIJOLLY HV PLV Direct current dim
- Page 296 and 297: MINIJOLLY LC PLV Direct current dim
- Page 300 and 301: MAXI JOLLY HC PLV BI professional l
- Page 302 and 303: CONSTANT VOLTAGE LED DRIVERS ALIMEN
- Page 304 and 305: UNTERPUTZDOSE professional led appl
- Page 306 and 307: EFU Direct current electronic drive
- Page 308 and 309: WU RGB IR & PUSH professional led a
- Page 310 and 311: VST BI Direct current electronic dr
- Page 312 and 313: VST professional led applications D
- Page 314 and 315: VST II professional led application
- Page 316 and 317: VSTR RGB - 1...10 V / PUSH / IR pro
- Page 318 and 319: DC 60W 24V DALI SLIM Direct current
- Page 320 and 321: DC 60W 24V SLIM Direct current elec
- Page 322 and 323: professional led applications Made
- Page 324 and 325: DCC/U S IP54 IP54 direct current el
- Page 326 and 327: STCP/U IP54 IP54 resin-bonded direc
- Page 328 and 329: SLIM/U IP65 professional led applic
- Page 330 and 331: ST2 IP67 professional led applicati
- Page 332 and 333: professional led applications Made
- Page 334 and 335: LV HR Direct current electronic dri
- Page 336 and 337: LV RGB 250 / 350 / 500 Direct curre
- Page 338 and 339: LV RGB IR Direct current electronic
- Page 340 and 341: professional led applications Made
- Page 342 and 343: COMBO LED Dimmable electronic drive
- Page 344 and 345: ELDN T Emergency light KIT for powe
- Page 346 and 347: ELED HP Emergency light KIT for pow
JOLLY SLIM PLV<br />
Direct current dimmable electronic drivers with DIP-SWITCH<br />
Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH<br />
Made in Europe<br />
professional led applications<br />
05<br />
SELV<br />
RIPPLE<br />
FREE<br />
Accessories not supplied - Accessori non a corredo<br />
Article - Articolo L (length) Code - Codice<br />
Synchronization cable<br />
Cavetto di sincronizzazione<br />
1,5 m / 4 ft 485720512<br />
4 m / 13 ft 485720513<br />
50 cm / 19,68’’ 485720515<br />
20 cm / 7,87’’ 485720516<br />
4.4<br />
Street lighting and energy saving <strong>LED</strong> drivers<br />
Alimentatori <strong>LED</strong> per illuminazione stradale e a risparmio energetico<br />
Rated Voltage<br />
Tensione Nominale<br />
110 ÷ 120 V (2)<br />
220 ÷ 240 V<br />
Frequency<br />
Frequenza<br />
50...60 Hz<br />
AC Operation range<br />
Tensione di utilizzo AC<br />
99 ÷ 264 V<br />
DC Operation range<br />
Tensione di utilizzo DC<br />
<strong>17</strong>6 ÷ 264 V<br />
Power<br />
Potenza<br />
0 ÷ 32 W<br />
Maximum current<br />
output ripple<br />
Max. ondulazione<br />
della corrente uscita<br />
≤ 3% (1)<br />
Reference Norms<br />
Norme di riferimento:<br />
EN 50<strong>17</strong>2 (VDE 0108)<br />
EN 55015<br />
EN 61000-3-2<br />
EN 61000-3-3<br />
EN 61347-1<br />
EN 61347-2-13<br />
EN 61547<br />
EN 62384<br />
VDE 0710-T14<br />
Article<br />
Articolo<br />
Code<br />
Codice<br />
P out<br />
W<br />
V out<br />
DC<br />
I out<br />
DC<br />
n° <strong>LED</strong><br />
max. (1)<br />
V out<br />
max.<br />
ta<br />
°C<br />
tc<br />
°C l max. h max.<br />
Power Efficiency (1)<br />
Factor<br />
DC JOLLY SLIM PLV 122681 Constant current output - Uscita in corrente costante -25...+50 80 0,96 > 87<br />
<strong>17</strong> (15 (2) ) 47 max. 350 mA cost. 12 53<br />
24 (15 (2) ) 47 max. 500 mA cost. 12<br />
32 (15 (2) ) 47 max. 700 mA cost. 12<br />
Constant voltage output - Uscita in tensione costante<br />
20 (15 (2) ) 24 cost. 900 mA max. - -<br />
(1)<br />
Referred to V in<br />
= 230 V, 100% load - Riferito a V in<br />
= 230 V, carico 100%<br />
Weight - Peso gr. 110 / 3,88 oz.<br />
Pcs - Pezzi 50<br />
220<br />
8,66’’<br />
237<br />
9,33’’<br />
30<br />
1,18’’<br />
21<br />
0,83’’<br />
Wiring diagram - Schema di collegamento (Max.<br />
<strong>LED</strong> distance at page info8 - Massima distanza <strong>LED</strong> a pagina info8)<br />
V in<br />
L<br />
PRI<br />
N<br />
L<br />
N<br />
SYNC<br />
SYNC<br />
max. 10 alimentatori in serie<br />
max. 10 drivers in looping connection<br />
V in<br />
PRI<br />
SYNC<br />
+<br />
_<br />
+<br />
_<br />
DIP SWITCH<br />
+<br />
_<br />
DIP SWITCH<br />
+ +<br />
SYNC<br />
_ _<br />
+<br />
_<br />
+<br />
_<br />
<strong>LED</strong><br />
<strong>LED</strong><br />
PUSH<br />
LV<br />
Features<br />
• Multipower driver supplied with dip-switch for the selection<br />
of the output current.<br />
• Driver for built-in use.<br />
• It can be used for lighting equipment in protection class I.<br />
• Active Power Factor Corrector.<br />
• Current regulation ±5 % including temperature variations.<br />
• Protections:<br />
- against overheating and short circuits;<br />
- against mains voltage spikes;<br />
- against overloads.<br />
Caratteristiche<br />
• Alimentatore multipotenza fornito di dip-switch per la selezione<br />
della corrente in uscita.<br />
• Alimentatore da incorporare.<br />
• Utilizzabile per apparecchi di illuminazione in classe di<br />
protezione I.<br />
• PFC attivo.<br />
• Corrente regolata ±5 % incluse variazioni di temperatura.<br />
• Protezioni:<br />
- termica e cortocircuito;<br />
- contro le extra-tensioni di rete;<br />
- contro i sovraccarichi.<br />
264 www.tci.it<br />
<strong>TCI</strong> professional <strong>LED</strong> applications