GUIDE TCI LED DRIVERS 2016-17
PLV SERIES (PUSH LOW VOLTAGE LED DRIVER) SERIE PLV (ALIMENTATORI LED PER PULSANTE BASSA TENSIONE) Made in Europe professional led applications Those of PLV series are multicurrent and multivoltage drivers, available for dimming by means of a PUSH function, connected to a terminal block insulated from the mains, installed on the SELV side of the driver. Such dimming is suggested for a LOCAL regulation of the product, that is to use the button in low voltage placed directly on the luminaire. A short push turns on and off the product, a longer one dimmes. Regulation automatically stops at minimum and maximum levels; dimming level memory at supply restore. I driver della serie PLV sono alimentatori multi corrente/multitensione adatti per essere dimmerati tramite un comando PUSH connesso su un morsetto isolato dalla rete, posto dal lato SELV del driver. Tale dimmerazione è suggerita per una regolazione LOCALE del prodotto, ovvero poter utilizzare pulsante in bassa tensione posto direttamente sul corpo della lampada. Una pressione breve accende e spegne il prodotto, una prolungata dimmera, fermandosi al minimo o al massimo; ripristino del livello di regolazione al ritorno dell’alimentazione. 4.4 Street lighting and energy saving LED drivers Alimentatori LED per illuminazione stradale e a risparmio energetico 258 www.tci.it TCI professional LED applications
MINIJOLLY PLV professional led applications Direct current dimmable electronic drivers with DIP-SWITCH Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH Made in Europe UL-CLASS2 (2) CSA-LVLE 05 SAA-141683-EA SELV RIPPLE FREE Rated Voltage Tensione Nominale 110 ÷ 120 V (2) 220 ÷ 240 V Frequency Frequenza 50...60 Hz AC Operation range Tensione di utilizzo AC 99 ÷ 264 V DC Operation range Tensione di utilizzo DC 176 ÷ 264 V Power Potenza 0 ÷ 20 W Maximum current output ripple Max. ondulazione della corrente uscita ≤ 3% (1) Reference Norms Norme di riferimento: CSA C22.2 no. 223 (2) EN 50172 (VDE 0108) EN 55015 EN 61000-3-2 EN 61000-3-3 EN 61347-1 EN 61347-2-13 EN 61547 EN 62384 UL 1310 (2) VDE 0710-T14 Article Articolo Code Codice P out W V out DC I out DC n° LED max. (1) V out max. ta °C tc °C l max. h max. Power Efficiency (1) Factor DC MINIJOLLY PLV 122406 Constant current output - Uscita in corrente costante -25...+50 80 0,95 > 87 15 (15 (2) ) 43 max. 350 mA cost. 12 49 20 (15 (2) ) 43 max. 500 mA cost. 9/10 20 (15 (2) ) 43 max. 550 mA cost. 9/10 20 (15 (2) ) 36 max. 700 mA cost. 6/7 20 (15 (2) ) 24 max. 850 mA cost. 5/6 20 (15 (2) ) 22 max. 900 mA cost. 4/5 Constant voltage output - Uscita in tensione costante 9 (9 (2) ) 10 cost. 900 mA max. - - 10 (10 (2) ) 12 cost. 900 mA max. - - 20 (15 (2) ) 24 cost. 900 mA max. - - (1) Referred to V in = 230 V, 100% load - Riferito a V in = 230 V, carico 100% 108 4,25’’ 110,4 4,35’’ Ø55 2,17’’ 27,5 1,08’’ 22 0,87’’ Weight - Peso: gr. 108 / 3,50 oz. Pcs - Pezzi 50 52 2,05’’ Features • Multipower driver supplied with dip-switch for the selection of the output current. • IP20 independent driver, for indoor use. • Class II protection against electric shock for direct or indirect contact. • Active Power Factor Corrector. • Current regulation ±5 % including temperature variations. • Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm 2 / AWG15). • Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm. • Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads. • Thermal protection = C.5.a. • Double output impedance for use in household electrical appliances. Wiring diagram - Schema di collegamento (Max. LED distance at page info8 - Massima distanza LED a pagina info8) SEC PUSH LV 6 5 4 3 2 1 PRI LED Caratteristiche • Alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita. • Alimentatore indipendente IP20, per uso interno. • Protetto in classe II contro le scosse elettriche per contatti diretti e indiretti. • PFC attivo. • Corrente regolata ±5 % incluse variazioni di temperatura. • Morsetti di entrata e uscita sullo stesso lato (sezione cavo fino a 1,5 mm 2 / AWG15). • Serracavo su primario e secondario per cavi di diametro: min. 3 mm - max. 8 mm. • Protezioni: - termica e cortocircuito; - contro le extra-tensioni di rete; - contro i sovraccarichi. • Protezione termica = C.5.a. • Doppia impedenza d’uscita per l’utilizzo in apparecchi elettrodomestici. + _ + _ N L PUSH LV Vin 4.4 Street lighting and energy saving LED drivers Alimentatori LED per illuminazione stradale e a risparmio energetico TCI professional LED applications www.tci.it 259
- Page 242 and 243: T-LED 90/580 DALI SLIM Direct curre
- Page 244 and 245: T-LED 80/500 DALI SLIM LS - LEDset2
- Page 246 and 247: professional led applications Made
- Page 248 and 249: SIRIO 150/200-700 Direct current di
- Page 250 and 251: SIRIO 150/300-1050 Direct current d
- Page 252 and 253: SIRIO 150/700 ST2 professional led
- Page 254 and 255: SIRIO 100 - 1...10 V & BILEVEL Dire
- Page 256 and 257: SIRIO 120/600-2100 - 1...10 V & BIL
- Page 258 and 259: SIRIO 150/200-700 - 1...10 V & BILE
- Page 260 and 261: SIRIO 150/300-1050 - 1...10 V & BIL
- Page 262 and 263: MAXI JOLLY US FP - FULL PROGRAMMABL
- Page 264 and 265: SIRIO 100/200-700 FP - FULL PROGRAM
- Page 266 and 267: SIRIO 150/200-700 FP - FULL PROGRAM
- Page 268 and 269: SIRIO 150/300-1050 FP - FULL PROGRA
- Page 270 and 271: POLARIS 150/200-700 FP - FULL PROGR
- Page 272 and 273: POLARIS 150/300-1050 FP - FULL PROG
- Page 274 and 275: DALI PROGRAMMER USB-DALI signal con
- Page 276 and 277: JOLLY AND MAXI JOLLY WITH CONFORMAL
- Page 278 and 279: 244 www.tci.it TCI professional LED
- Page 280 and 281: MIDNIGHT SERIES SERIE MIDNIGHT Made
- Page 282 and 283: MAXI JOLLY US MIDNIGHT Direct curre
- Page 284 and 285: BILEVEL SERIES SERIE BILEVEL Made i
- Page 286 and 287: JOLLY US BILEVEL Direct current dim
- Page 288 and 289: MAXI JOLLY US BILEVEL Direct curren
- Page 290 and 291: MAXI JOLLY HC BILEVEL BI profession
- Page 294 and 295: MINIJOLLY HV PLV Direct current dim
- Page 296 and 297: MINIJOLLY LC PLV Direct current dim
- Page 298 and 299: JOLLY SLIM PLV Direct current dimma
- Page 300 and 301: MAXI JOLLY HC PLV BI professional l
- Page 302 and 303: CONSTANT VOLTAGE LED DRIVERS ALIMEN
- Page 304 and 305: UNTERPUTZDOSE professional led appl
- Page 306 and 307: EFU Direct current electronic drive
- Page 308 and 309: WU RGB IR & PUSH professional led a
- Page 310 and 311: VST BI Direct current electronic dr
- Page 312 and 313: VST professional led applications D
- Page 314 and 315: VST II professional led application
- Page 316 and 317: VSTR RGB - 1...10 V / PUSH / IR pro
- Page 318 and 319: DC 60W 24V DALI SLIM Direct current
- Page 320 and 321: DC 60W 24V SLIM Direct current elec
- Page 322 and 323: professional led applications Made
- Page 324 and 325: DCC/U S IP54 IP54 direct current el
- Page 326 and 327: STCP/U IP54 IP54 resin-bonded direc
- Page 328 and 329: SLIM/U IP65 professional led applic
- Page 330 and 331: ST2 IP67 professional led applicati
- Page 332 and 333: professional led applications Made
- Page 334 and 335: LV HR Direct current electronic dri
- Page 336 and 337: LV RGB 250 / 350 / 500 Direct curre
- Page 338 and 339: LV RGB IR Direct current electronic
- Page 340 and 341: professional led applications Made
PLV SERIES (PUSH LOW VOLTAGE <strong>LED</strong> DRIVER)<br />
SERIE PLV (ALIMENTATORI <strong>LED</strong> PER PULSANTE BASSA TENSIONE)<br />
Made in Europe<br />
professional led applications<br />
Those of PLV series are multicurrent and multivoltage drivers, available for<br />
dimming by means of a PUSH function, connected to a terminal block insulated<br />
from the mains, installed on the SELV side of the driver.<br />
Such dimming is suggested for a LOCAL regulation of the product, that is to use<br />
the button in low voltage placed directly on the luminaire.<br />
A short push turns on and off the product, a longer one dimmes. Regulation<br />
automatically stops at minimum and maximum levels; dimming level memory<br />
at supply restore.<br />
I driver della serie PLV sono alimentatori multi corrente/multitensione adatti per<br />
essere dimmerati tramite un comando PUSH connesso su un morsetto isolato<br />
dalla rete, posto dal lato SELV del driver.<br />
Tale dimmerazione è suggerita per una regolazione LOCALE del prodotto, ovvero<br />
poter utilizzare pulsante in bassa tensione posto direttamente sul corpo della<br />
lampada.<br />
Una pressione breve accende e spegne il prodotto, una prolungata dimmera,<br />
fermandosi al minimo o al massimo; ripristino del livello di regolazione al ritorno<br />
dell’alimentazione.<br />
4.4<br />
Street lighting and energy saving <strong>LED</strong> drivers<br />
Alimentatori <strong>LED</strong> per illuminazione stradale e a risparmio energetico<br />
258 www.tci.it<br />
<strong>TCI</strong> professional <strong>LED</strong> applications
Change language