GUIDE TCI LED DRIVERS 2016-17
PROFESSIONALE DALI 32 Direct current dimmable electronic drivers with DIP-SWITCH Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH Made in Europe professional led applications SELV RIPPLE FREE 3.1 PROFESSIONALE DALI PROFESSIONALE DALI BI Dimmable multipower LED drivers Alimentatori LED multipotenza regolabili Rated Voltage Tensione Nominale 220 ÷ 240 V Frequency Frequenza 50...60 Hz AC Operation range Tensione di utilizzo AC 198 ÷ 264 V DC Operation range Tensione di utilizzo DC 198 ÷ 280 V Power Potenza 4 ÷ 32 W Typical ripple at max output current Ondulazione tipica alla massima corrente uscita ≤ 3% (1) Reference Norms Norme di riferimento: EN 50172 (VDE 0108) EN 55015 EN 61000-3-2 EN 61000-3-3 EN 61347-1 EN 61347-2-13 EN 61547 EN 62386-101 EN 62386-102 EN 62386-207 VDE 0710-T14 Article Articolo PROFESSIONALE DALI PROFESSIONALE DALI BI Code Codice 127490 127492 P out W V out DC Features • Multipower driver supplied with dip-switch for the selection of the output current. • IP20 independent driver, for indoor use (PROFESSIONALE DALI). • Class I protection against electric shock for direct or indirect contact (PROFESSIONALE DALI). • Driver for built-in use (PROFESSIONALE DALI BI). • It can be used for lighting equipment in protection class I (PROFESSIONALE DALI BI). • Active Power Factor Corrector. • Current regulation ±5 % including temperature variations. • Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm 2 / AWG15). • Clamping screws on primary and secondary circuits for cables with diameter: min. 2 mm - max. 9 mm (PROFESSIONALE DALI). • Driver can be secured with slot for screws. • Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads. • Thermal protection = C.5.a. I out DC n° LED max. (1) V out max. ta °C tc °C l max. Power Factor h max. Efficiency (1) 11 10...45 250 mA cost. 11/12 50 -25...+50 80 0,95 > 89 13 10...45 300 mA cost. 11/12 16 10...45 350 mA cost. 11/12 18 10...45 400 mA cost. 11/12 20 10...45 450 mA cost. 11/12 22 10...45 500 mA cost. 11/12 25 10...45 550 mA cost. 11/12 27 10...45 600 mA cost. 11/12 29 10...45 650 mA cost. 11/12 32 10...45 700 mA cost. 11/12 (1) Referred to V in = 230 V, 100% load - Riferito a V in = 230 V, carico 100% AVAILABLE SOON Caratteristiche • Alimentatore multipotenza fornito di dip-switch per la selezione della corrente in uscita. • Alimentatore indipendente IP20, per uso interno (PROFESSIONALE DALI). • Protetto in classe I contro le scosse elettriche per contatti diretti e indiretti (PROFESSIONALE DALI). • Alimentatore da incorporare (PROFESSIONALE DALI BI). • Utilizzabile per apparecchi di illuminazione in classe di protezione I (PROFESSIONALE DALI BI). • PFC attivo. • Corrente regolata ±5 % incluse variazioni di temperatura. • Morsetti di entrata e uscita contrapposti (sezione cavo fino a 1,5 mm 2 / AWG15). • Serracavo su primario e secondario per cavi di diametro: min. 2 mm - max. 9 mm (PROFESSIONALE DALI). • Fissaggio dell’alimentatore tramite asole per viti. • Protezioni: - termica e cortocircuito; - contro le extra-tensioni di rete; - contro i sovraccarichi. • Protezione termica = C.5.a. 126 www.tci.it TCI professional LED applications
PROFESSIONALE DALI 32 Direct current dimmable electronic drivers with DIP-SWITCH Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH Made in Europe professional led applications Ø54 2,13’’ Weight - Peso gr. 105 / 3,7 oz. Pcs - Pezzi 40 88 3,46’’ Weight - Peso gr. 98 / 3,7 oz. Pcs - Pezzi - 32 1,26’’ 42 1,65’’ 42,5 1,67’’ 33,5 1,32’’ 114 4,49’’ 30 1,18’’ 30 1,18’’ 3.1 129,5 5,10’’ 97 3,82’’ Wiring diagram - Schema di collegamento (Max. LED distance on page info8 - Massima distanza LED a pagina info8) Vin N PRI L SEC DIP-SWITCH 4 3 2 1 DALI + _ LED DALI Dimmable multipower LED drivers Alimentatori LED multipotenza regolabili Operation Mode • Features DALI dimming (0/0,5 - 100 %): - memory function for sets or light groups; - recall of stored functions; - compatible with standard DALI interfaces. For additional details for regulations see pages info12-14. Modalità di funzionamento • Caratteristiche della regolazione DALI (0/0,5 - 100 %): - funzione di memoria per scenari o gruppi luminosi; - richiamo di funzioni memorizzate; - compatibilità con interfacce DALI standard. Per ulteriori dettagli sulle regolazioni vedi pagine info12-14. TCI professional LED applications www.tci.it 127
- Page 110 and 111: MP 32 SLIM Direct current electroni
- Page 112 and 113: MP 60 SLIM Direct current electroni
- Page 114 and 115: SMART 70 HC SLIM Direct current ele
- Page 116 and 117: MP 50/350 SLIM Direct current elect
- Page 118 and 119: MP 80/500 SLIM Direct current elect
- Page 120 and 121: MP 80/500 SLIM LS - LEDset2 Direct
- Page 122 and 123: professional led applications Made
- Page 124 and 125: MICRO JOLLY 6 - 1...10 V & PUSH Dir
- Page 126 and 127: MOONLIGHT 6 Direct current dimmable
- Page 128 and 129: RD57 - 1...10 V & PUSH Direct curre
- Page 130 and 131: MICRO MD professional led applicati
- Page 132 and 133: MINIJOLLY 20 - 1...10 V & PUSH Dire
- Page 134 and 135: MINIJOLLY DALI 20 professional led
- Page 136 and 137: MINIJOLLY LC 20 - 1...10 V & PUSH D
- Page 138 and 139: MINIJOLLY LC DALI 20 Direct current
- Page 140 and 141: MINIJOLLY HV Direct current dimmabl
- Page 142 and 143: MINIJOLED - 1...10 V & PUSH Direct
- Page 144 and 145: MINI MD Direct current dimmable (TR
- Page 146 and 147: JOLLY 25 - 1...10 V & PUSH Direct c
- Page 148 and 149: JOLLY HV 25 - 1...10 V & PUSH Direc
- Page 150 and 151: JOLLY PLUS - 1...10 V & PUSH Direct
- Page 152 and 153: JOLLY HV PLUS - 1...10 V & PUSH Dir
- Page 154 and 155: JOLLY US 32 - 1...10 V & PUSH Direc
- Page 156 and 157: JOLLY DALI 32 Direct current dimmab
- Page 158 and 159: JOLLY HC 39 - 1...10 V & PUSH Direc
- Page 162 and 163: JOLLY MD 32 Direct current dimmable
- Page 164 and 165: WIDESQUARE R - 1...10 V & PUSH Dire
- Page 166 and 167: JOLLY DIN 32 Direct current dimmabl
- Page 168 and 169: MAXI JOLLY SV DALI 40 Direct curren
- Page 170 and 171: MAXI JOLLY US 50 - 1...10 V & PUSH
- Page 172 and 173: MAXI JOLLY US DALI 50 Direct curren
- Page 174 and 175: MAXI JOLLY SV - SELV 60 V - 1...10
- Page 176 and 177: MAXI JOLLY SV DALI - SELV 60 V Dire
- Page 178 and 179: MAXI JOLLY HV 50 - 1...10 V & PUSH
- Page 180 and 181: MAXI JOLLY HV DALI 50 Direct curren
- Page 182 and 183: MAXI JOLLY US TCM 50 - 1...10 V & P
- Page 184 and 185: MAXI JOLLY US DALI TCM 50 Direct cu
- Page 186 and 187: MAXI JOLLY HC 55 - 1...10 V & PUSH
- Page 188 and 189: MAXI JOLLY HC DALI 55 Direct curren
- Page 190 and 191: MAXI JOLLY HC TCM 55 - 1...10 V & P
- Page 192 and 193: MAXI JOLLY HC DALI TCM 55 Direct cu
- Page 194 and 195: MAXI JOLLY H 65 Direct current dimm
- Page 196 and 197: MAXI JOLLY DALI H 65 Direct current
- Page 198 and 199: MAXI JOLLY HTCM 65 Direct current d
- Page 200 and 201: MAXI JOLLY DALI HTCM 65 Direct curr
- Page 202 and 203: MAXI JOLLY DALI CR 50 Direct curren
- Page 204 and 205: DMX VST Direct current dimmable ele
- Page 206 and 207: RV LED professional led application
- Page 208 and 209: SUPERSLIM 1...10 V Direct current d
PROFESSIONALE DALI 32<br />
Direct current dimmable electronic drivers with DIP-SWITCH<br />
Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH<br />
Made in Europe<br />
professional led applications<br />
Ø54<br />
2,13’’<br />
Weight - Peso gr. 105 / 3,7 oz.<br />
Pcs - Pezzi 40<br />
88<br />
3,46’’<br />
Weight - Peso gr. 98 / 3,7 oz.<br />
Pcs - Pezzi -<br />
32<br />
1,26’’<br />
42<br />
1,65’’<br />
42,5<br />
1,67’’<br />
33,5<br />
1,32’’<br />
114<br />
4,49’’<br />
30<br />
1,18’’<br />
30<br />
1,18’’<br />
3.1<br />
129,5<br />
5,10’’<br />
97<br />
3,82’’<br />
Wiring diagram - Schema di collegamento (Max. <strong>LED</strong> distance on page info8 - Massima distanza <strong>LED</strong> a pagina info8)<br />
Vin<br />
N<br />
PRI<br />
L<br />
SEC<br />
DIP-SWITCH<br />
4<br />
3<br />
2<br />
1<br />
DALI<br />
+<br />
_<br />
<strong>LED</strong><br />
DALI<br />
Dimmable multipower <strong>LED</strong> drivers<br />
Alimentatori <strong>LED</strong> multipotenza regolabili<br />
Operation Mode<br />
• Features DALI dimming (0/0,5 - 100 %):<br />
- memory function for sets or light groups;<br />
- recall of stored functions;<br />
- compatible with standard DALI interfaces.<br />
For additional details for regulations see pages info12-14.<br />
Modalità di funzionamento<br />
• Caratteristiche della regolazione DALI (0/0,5 - 100 %):<br />
- funzione di memoria per scenari o gruppi luminosi;<br />
- richiamo di funzioni memorizzate;<br />
- compatibilità con interfacce DALI standard.<br />
Per ulteriori dettagli sulle regolazioni vedi pagine info12-14.<br />
<strong>TCI</strong> professional <strong>LED</strong> applications www.tci.it<br />
127