4. Installation et montage - Kessel

15. Technical specificationsControl unit• Mains connection fuse 10 A slow-blow; fault current circuit breaker 30 mA• Device-internal glass tube microfuse 5x20mm 3.15AT only for the inputs and outputs(The electronic system has an independent power supply and battery buffer)• Mains voltage / mains frequency 230 VAC / 50 Hz• Control unit with 1.4 m mains power supply cable and angled earthed connector• Mains current standby (ready for operation) 17 mA (display background lighting is switched off).• Mains current in operation 0.8 A to 1.4 A (depending on compressor size)• Working temperature 0°C to + 40°C• Type of protection IP 42 (IP44 when compressor is plugged in)• Protection class 1• Switching capacity of the relay outputs 230 V AC, 16 A, cos phi = 1• Switching capacity of the floating contact (changeover contact) 230 Vac, 5 A ; 42 VDC 0.5 A• Connection for serial interface COM1 via 5-pole connector (optional)• Connection for second floating switch 230 VAC via 3 terminals (optional)• Connection for remote signal generator 20 m line 2 x 0.75 qmm (KESSEL-No. 20162) (optional)• Connection for compressor via earthed coupling• Connection for valve block via Amphenol socket 6 + PE• Dimensions [mm] = 180 x 200 x 65• Weight control unit 1.2 kg (without packaging)CompressorDiaphragm compressor model EL 100Mains voltage / mains frequency 230 VAC - 50 HzConnection to control unit via 1 m mains power supplycable with straight earthed connectorPerformance P = 120 W at 200 mbarProtection class 1Type of protection IP 44Q = 93 l/min at 200 mbarWorking temperature 0° C up to + 40° CDimensions [mm] = 270 x 200 x 220Hose connection d = 19 mmWeight = 8.5 kgValve block with floating switchMains voltage / mains frequency 230 VAC - 50 HzConnection on the control unit via 15 m connecting linewith Amphenol connector 6 + PEPerformance P = 7WProtection class 1Type of protection IP 68Working temperature 0° C up to + 40° CDimensions [mm] = 200 x 140 x 140Hose connections da = 25 mm & da = 20 mmWeight: 3,5 kgDiaphragm compressor model EL 150Mains voltage / mains frequency 230 VAC - 50 HzConnection to control unit via 1 m mains power supplycable with straight earthed connectorPerformance P = 170 W at 200 mbarProtection class 1Type of protection IP 44Q = 150 l/min at 200 mbarWorking temperature 0° C up to + 40° CDimensions[mm] = 360 x 270 x 230Hose connection da = 27 mmWeight = 16 kg133