MXP 1000 E EF MXP 1002 E EF MXP 1200 E EF

10 WarrantyFor our tools, we give warranty for material andproduction defects in accordance with the locallyapplicable legal provisions, but in any case for atleast 12 months. Within the EU member states, thewarranty period is 24 months (verification throughinvoice or delivery note).Damage caused by, in particular, natural wear, overloading,incorrect handling, or damage caused bythe operator, or damage caused through use of theequipment contrary that specified in the OperatingInstructions, or damage which was known atthe time of purchase, is not covered by the warranty.Furthermore, damage caused by the use ofnon-original PROTOOL accessories and consumablematerial (e.g. sanding pads) is also excluded.Complaints can only be recognised if the tool isreturned while still assembled to the supplier or anauthorised PROTOOL Customer Service workshop.Keep the Operating Instructions, Safety Instructions,Spare Parts List and purchase receipt in asafe place. Otherwise the respective, current warrantyconditions of the manufacturer shall apply.NoteDue to continuous research and development work,we reserve the right to make changes to the technicalcontent of this documentation.11 Declaration of ConformityStirrerSerial no.MXP 1000 E EF 779900, 765917MXP 1002 E EF 764150, 764925MXP 1200 E EF 764151, 764933We declare under our sole responsibility that thisproduct is in conformity with the following standardsor standardization documents:EN 50 366, EN 55 014-1, EN 55 014-2, EN 60 745-1,EN 61 000-3-2, EN 61 000-3-3 according to theprovision of the regulations stipulated in Directive2006/42/EC, 2004/108/EC.All the procedures were applied as validly amendedat the time of the issue of this declaration, withoutquoting these.Technical documentation is kept at the manufacturer.11Stanislav JakešResearch and developmentProtool GmbHWertstr. 20D-73240 Wendlingen2. 5. 201115