MXP 1000 E EF MXP 1002 E EF MXP 1200 E EF

Original instructionGB1 Technical SpecificationsStirrer MXP 1000 E EF MXP 1002 E EF MXP 1200 E EFVoltage 220 – 240 V 220 – 240 V 220 – 240 VFrequency 50 / 60 Hz 50 / 60 Hz 50 / 60 HzConnected load 1020 W 1020 W 1200 WIdling speed1st speed 360 – 630 rpm 360 – 630 rpm 360 – 630 rpm2nd speed – 580 – 1010 rpm –Electronic speed preselection • • •Temperature-dependentoverload protection– • •2-speed switch – • –Tool adapter M14x2/ErgoFix M14x2/ErgoFix M14x2/ErgoFixStirrer – max 120 mm 120 mm 140 mmCollar – 57 mm 57 mm 57 mmWeight 4.5 kg 4.9 kg 4.5 kgProtection rating II / II / II /Table of contents1 Technical Specifications........................ 102 Symbols ............................................ 103 Operating equipment ........................... 104 Intended use ...................................... 105 Safety instructions .............................. 115.1 General safety instructions ................... 115.2 Safety warnings .................................. 115.3 Other safety risks ............................... 115.4 Information about noise and vibrations ... 116 Starting up and using the machine ........ 126.1 Tightening the stirrer ........................... 126.2 Switching the machine on and off .......... 126.3 Control electronics .............................. 126.4 Speed selection switch ......................... 126.5 ErgoFix interface ................................. 126.6 Stirrer ............................................... 136.7 Mains connection ................................ 136.8 Stationary use .................................... 146.9 Suction .............................................. 147 Service and maintenance ..................... 148 Service .............................................. 149 Environmental Protection / Disposal ........ 1410 Warranty ........................................... 1511 Declaration of Conformity .................... 152 SymbolsDouble insulation►Wear ear protection!Read the instructionsNot to be included in municipal refuseAdvice or tip3 Operating equipment[1-1] Right handle[1-2] Left handle[1-3] Switch with switch protection[1-4] Locking button[1-5] Speed control[1-6] Collar[1-7] Casing[1-8] ErgoFix adapter[1-9] Speed selection switch (MXP 1002 E EF)[1-10] Ventilation openingAccessories that are illustrated or described hereare not always included in the scope of delivery.4 Intended useThe device is designed for mixing powdered materials,such as mortar, plaster, adhesives and nonsolventpaints, varnishes and similar substances.The manufacturer accepts no liability for possibledamage or accidents caused by using or operatingthe device inappropriately or incorrectly.Warning of general dangerRisk of electric shock10