www.krups.com

- an increase in noise when boiling,
- brewing takes longer,
- the coffee maker automatically switches
itself off when there is still water in the
water tank.
You can use :
. either a sachet of descaler diluted in 2 large
cups of water
. or 2 large cups of white wine vinegar
• Pour the mixture into the water tank and
start your coffee maker (without coffee).
• Allow the equivalent of one cup to run
through the isothermal coffee jug, then stop
the coffee maker.
• Leave the remaining mixture in the coffee
maker to work for one hour.
• Restart your coffee maker to finish the runthrough.
• Rinse your coffee maker by running it 2 or 3
times with fresh water (full water tank)
before making coffee.
Please note : keep the sachet of descaler well
out of reach of children.
Cleaning
• Unplug the appliance.
• Your coffee maker and isothermal coffee jug
must only be cleaned with a damp cloth or
sponge.
• Carefully handle the isothermal coffee
jug :place some washing up liquid and warm
water and gently shake. Stains can be
removed with a soft brush.
• Never clean the isothermal coffee jug with
hard objects : scratches on the glass could
break the coffee jug.
• Never place the appliance in water or under
running water.
• The lid of the isothermal coffee jug can be
washed in the dishwasher.
• To remove the used coffee grounds, remove
the filter holder (d) from the coffee maker
(11).
• To ensure the active filter holder (d)
remains fully effective, do not remove it
from the holder unit and clean the filter
holder simply by holding it under a
running tap (not in the diswasher).
Accessories
. Isothermal coffee jug : code n° 269
. Permanent filter : code n° 0072526
AROMA.THERMOS.187-229.EUR 13
16/01/04, 15:38
13